|
|
|
|
|
|
|
|
$284.99
Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 11/16 in. Bore
Dennis Kirk Part #: 573283
Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 11/16 in. Bore: Manufacturer part # 03-113BLK - Designed with a modern technology and flair, with a nod to the Art Deco and Slipstream design period of the 1930s. Designed by Joker's own R.P. Warren, and available in show chrome or deep, hard, black-anodized finishes completely manufactured in the United States at Joker's Montclair, Calif., facility. Controls install on handlebar with an ultra-compact, clean-looking integrated pinch clamp system; design features a special bushing that doubles as a mirror shaft mount for an extra-clean look (mirrors are not included); stylish solid stainless steel pivot pin when mirrors aren't desired. Brake master cylinders available in 9/16" (single disc brake) and 11/16" (dual disc front brake) with or without brake light switches in. Master cylinder reservoir cap screws on to provide instant access to brake fluid without having to use a wrench. Master cylinders feature Joker's exclusive self-lubricating polymer piston and seal kits; ball bearing-actuated piston rides in a hard-surface roller-burnished bore for precise, durable operation. Designed to fit 1 in. diameter handlebar applications; master cylinder bodies will accept up to 1 1/2" diameter handlebars right up to the clamp face. Switch housings feature high-quality Marquardt waterproof, dustproof and heat-resistant switches for brake, turn signal, horn, and kill switch function (sold separately). Matching left-side chrome grip or black anodized spacer, machined from billet aluminum, is available separately. Made in the U.S.A.. , NOTE: Without brake light switch, NOTE: Switch housing part numbers right side use either part number 21-2348 or 212349; left side use either 21-2350 or 212351. 03-113BLK
1 on Hand
More Info/Options for Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 11/16 in. Bore
|
|
|
|
$331.99
Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 11/16 in. Bore
Dennis Kirk Part #: 573281
Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 11/16 in. Bore: Manufacturer part # 03-112BLK - Designed with a modern technology and flair, with a nod to the Art Deco and Slipstream design period of the 1930s. Designed by Joker's own R.P. Warren, and available in show chrome or deep, hard, black-anodized finishes completely manufactured in the United States at Joker's Montclair, Calif., facility. Controls install on handlebar with an ultra-compact, clean-looking integrated pinch clamp system; design features a special bushing that doubles as a mirror shaft mount for an extra-clean look (mirrors are not included); stylish solid stainless steel pivot pin when mirrors aren't desired. Brake master cylinders available in 9/16" (single disc brake) and 11/16" (dual disc front brake) with or without brake light switches in. Master cylinder reservoir cap screws on to provide instant access to brake fluid without having to use a wrench. Master cylinders feature Joker's exclusive self-lubricating polymer piston and seal kits; ball bearing-actuated piston rides in a hard-surface roller-burnished bore for precise, durable operation. Designed to fit 1 in. diameter handlebar applications; master cylinder bodies will accept up to 1 1/2" diameter handlebars right up to the clamp face. Switch housings feature high-quality Marquardt waterproof, dustproof and heat-resistant switches for brake, turn signal, horn, and kill switch function (sold separately). Matching left-side chrome grip or black anodized spacer, machined from billet aluminum, is available separately. Made in the U.S.A.. , NOTE: Includes brake light switch, NOTE: Switch housing part numbers right side use either part number 21-2348 or 212349; left side use either 21-2350 or 212351. 03-112BLK
1 on Hand
More Info/Options for Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 11/16 in. Bore
|
|
|
|
$331.99
Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 9/16 in. Bore
Dennis Kirk Part #: 573277
Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 9/16 in. Bore: Manufacturer part # 03-110BLK - Designed with a modern technology and flair, with a nod to the Art Deco and Slipstream design period of the 1930s. Designed by Joker's own R.P. Warren, and available in show chrome or deep, hard, black-anodized finishes completely manufactured in the United States at Joker's Montclair, Calif., facility. Controls install on handlebar with an ultra-compact, clean-looking integrated pinch clamp system; design features a special bushing that doubles as a mirror shaft mount for an extra-clean look (mirrors are not included); stylish solid stainless steel pivot pin when mirrors aren't desired. Brake master cylinders available in 9/16" (single disc brake) and 11/16" (dual disc front brake) with or without brake light switches in. Master cylinder reservoir cap screws on to provide instant access to brake fluid without having to use a wrench. Master cylinders feature Joker's exclusive self-lubricating polymer piston and seal kits; ball bearing-actuated piston rides in a hard-surface roller-burnished bore for precise, durable operation. Designed to fit 1" diameter handlebar applications; master cylinder bodies will accept up to 1 1/2" diameter handlebars right up to the clamp face. Switch housings feature high-quality Marquardt waterproof, dustproof and heat-resistant switches for brake, turn signal, horn, and kill switch function (sold separately). Matching left-side chrome grip or black anodized spacer, machined from billet aluminum, is available separately. Made in the U.S.A.. , NOTE: Includes brake light switch, NOTE: Switch housing part numbers right side use either part number 212348 or 212349; left side use either 212350 or 212351. 03-110BLK
1 on Hand
More Info/Options for Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 9/16 in. Bore
|
|
|
|
$284.99
Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 9/16 in. Bore
Dennis Kirk Part #: 573279
Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 9/16 in. Bore: Manufacturer part # 03-111BLK - Designed with a modern technology and flair, with a nod to the Art Deco and Slipstream design period of the 1930s. Designed by Joker's own R.P. Warren, and available in show chrome or deep, hard, black-anodized finishes completely manufactured in the United States at Joker's Montclair, Calif., facility. Controls install on handlebar with an ultra-compact, clean-looking integrated pinch clamp system; design features a special bushing that doubles as a mirror shaft mount for an extra-clean look (mirrors are not included); stylish solid stainless steel pivot pin when mirrors aren't desired. Brake master cylinders available in 9/16" (single disc brake) and 11/16" (dual disc front brake) with or without brake light switches in. Master cylinder reservoir cap screws on to provide instant access to brake fluid without having to use a wrench. Master cylinders feature Joker's exclusive self-lubricating polymer piston and seal kits; ball bearing-actuated piston rides in a hard-surface roller-burnished bore for precise, durable operation. Designed to fit 1" diameter handlebar applications; master cylinder bodies will accept up to 1 1/2" diameter handlebars right up to the clamp face. Switch housings feature high-quality Marquardt waterproof, dustproof and heat-resistant switches for brake, turn signal, horn, and kill switch function (sold separately). Matching left-side chrome grip or black anodized spacer, machined from billet aluminum, is available separately. Made in the U.S.A.. , NOTE: Without brake light switch, NOTE: Switch housing part numbers right side use either part number 21-2348 or 212349; left side use either 21-2350 or 212351. 03-111BLK
Expected Soon
More Info/Options for Black Anodized Joker Machine JX Brake Master Cylinder Assembly - 9/16 in. Bore
|
|
|
|
$284.99
Black Anodized Joker Machine JX Hydraulic Clutch Master Cylinder Assembly - 11/16 in. Bore
Dennis Kirk Part #: 573287
Black Anodized Joker Machine JX Hydraulic Clutch Master Cylinder Assembly - 11/16 in. Bore: Manufacturer part # 03-122BLK - Designed with a modern technology and flair, with a nod to the Art Deco and Slipstream design period of the 1930s. Designed by Joker's own R.P. Warren, and available in show chrome or deep, hard, black-anodized finishes completely manufactured in the United States at Joker's Montclair, Calif., facility. Controls install on handlebar with an ultra-compact, clean-looking integrated pinch clamp system; design features a special bushing that doubles as a mirror shaft mount for an extra-clean look (mirrors are not included); stylish solid stainless steel pivot pin when mirrors aren?t desired. Left-side hydraulic clutch master cylinders are available in 9/16" or 11/16" or a mechanical cable version. Master cylinder reservoir cap screws on to provide instant access to brake fluid without having to use a wrench. Master cylinders feature Joker's exclusive self-lubricating polymer piston and seal kits; ball bearing-actuated piston rides in a hard-surface roller-burnished bore for precise, durable operation. Designed to fit 1? diameter handlebar applications; master cylinder bodies will accept up to 1 1/2" diameter handlebars right up to the clamp face. Switch housings feature high-quality Marquardt waterproof, dustproof and heat-resistant switches for brake, turn signal, horn, and kill switch function (sold separately). Matching left-side chrome grip or black anodized spacer, machined from billet aluminum, is available separately. Made in the U.S.A.. , NOTE: Switch housing part numbers right side use either part number 21-2348 or 212349; left side use either 21-2350 or 212351, NOTE: For grip spacers use either part number 27-1485 and 21-2567. 03-122BLK
1 on Hand
More Info/Options for Black Anodized Joker Machine JX Hydraulic Clutch Master Cylinder Assembly - 11/16 in. Bore
|
|
|
|
$284.99
Black Anodized Joker Machine JX Hydraulic Clutch Master Cylinder Assembly - 9/16 in. Bore
Dennis Kirk Part #: 573285
Black Anodized Joker Machine JX Hydraulic Clutch Master Cylinder Assembly - 9/16 in. Bore: Manufacturer part # 03-121BLK - Designed with a modern technology and flair, with a nod to the Art Deco and Slipstream design period of the 1930s. Designed by Joker's own R.P. Warren, and available in show chrome or deep, hard, black-anodized finishes completely manufactured in the United States at Joker's Montclair, Calif., facility. Controls install on handlebar with an ultra-compact, clean-looking integrated pinch clamp system; design features a special bushing that doubles as a mirror shaft mount for an extra-clean look (mirrors are not included); stylish solid stainless steel pivot pin when mirrors aren't desired. Left-side hydraulic clutch master cylinders are available in 9/16" or 11/16" or a mechanical cable version. Master cylinder reservoir cap screws on to provide instant access to brake fluid without having to use a wrench. Master cylinders feature Joker's exclusive self-lubricating polymer piston and seal kits; ball bearing-actuated piston rides in a hard-surface roller-burnished bore for precise, durable operation. Designed to fit 1" diameter handlebar applications; master cylinder bodies will accept up to 1 1/2" diameter handlebars right up to the clamp face. Switch housings feature high-quality Marquardt waterproof, dustproof and heat-resistant switches for brake, turn signal, horn, and kill switch function (sold separately). Matching left-side chrome grip or black anodized spacer, machined from billet aluminum, is available separately. Made in the U.S.A., NOTE: Switch housing part numbers right side use either part number 212348 or 212349; left side use either 212350 or 212351, NOTE: For grip spacers use either part number 271485 and 212567. 03-121BLK
1 on Hand
More Info/Options for Black Anodized Joker Machine JX Hydraulic Clutch Master Cylinder Assembly - 9/16 in. Bore
|
|
|
|
$198.99
Black Anodized Joker Machine Mechanical Clutch Side Controls for 1987-06 OEM-Style Big Twin Clutch Cable
Dennis Kirk Part #: 199920
Black Anodized Joker Machine Mechanical Clutch Side Controls for 1987-06 OEM-Style Big Twin Clutch Cable: Manufacturer part # 03-120BLK - Designed with a modern technology and flair, with a nod to the Art Deco and Slipstream design period of the 1930s. Designed by Joker's own R.P. Warren, and available in show chrome or deep, hard, black-anodized finishes completely manufactured in the United States at Joker's Montclair, Calif., facility. Controls install on handlebar with an ultra-compact, clean-looking integrated pinch clamp system; design features a special bushing that doubles as a mirror shaft mount for an extra-clean look (mirrors are not included); stylish solid stainless steel pivot pin when mirrors aren't desired. Designed to fit 1" diameter handlebar applications; master cylinder bodies will accept up to 1 1/2" diameter handlebars right up to the clamp face. Made in the U.S.A.. NOTE: Switch housing part numbers right side use part number 212348; left side use 212350. For grip spacers use either part number 271485.. 03-120BLK
1 on Hand
More Info/Options for Black Anodized Joker Machine Mechanical Clutch Side Controls for 1987-06 OEM-Style Big Twin Clutch Cable
|
|
|
|
|
|
$312.99
Black Anodized Joker Machine Style King Brake Master Cylinder Assembly - 9/16 in. Bore
Dennis Kirk Part #: 573347
Black Anodized Joker Machine Style King Brake Master Cylinder Assembly - 9/16 in. Bore: Manufacturer part # 03-150BLK - The solution for bagger owners who want custom billet controls without sacrificing their radio and cruise controls. Tapered design provides clearance for larger bars. Master cylinder reservoir caps are fastened with bolts that install from beneath the hand control for a hidden-hardware look. Clutch control available in cable, or hydraulic with a 9/16 in. and 11/16 in. bore; brake side is available in 9/16 in. bore for single-disc brake and 11/16 in. bore for dual-disc front brakes, available in chrome or black. Master cylinders feature long-life brake piston assembly. Made in the U.S.A... 03-150BLK
Expected Soon
More Info/Options for Black Anodized Joker Machine Style King Brake Master Cylinder Assembly - 9/16 in. Bore
|
|
|
|
$198.99
Black Anodized Joker Machine Style King Cable Clutch Lever Assembly
Dennis Kirk Part #: 573355
Black Anodized Joker Machine Style King Cable Clutch Lever Assembly: Manufacturer part # 03-154BLK - The solution for bagger owners who want custom billet controls without sacrificing their radio and cruise controls. Tapered design provides clearance for larger bars. Master cylinder reservoir caps are fastened with bolts that install from beneath the hand control for a hidden-hardware look. Clutch control available in cable, or hydraulic with a 9/16 in. and 11/16 in. bore; brake side is available in 9/16 in. bore for single-disc brake and 11/16 in. bore for dual-disc front brakes, available in chrome or black. Master cylinders feature long-life brake piston assembly. Made in the U.S.A... 03-154BLK
Expected Soon
More Info/Options for Black Anodized Joker Machine Style King Cable Clutch Lever Assembly
|
|
|
|
|
|
|
|
$108.99
Black Anodized Joker Machine View Tech II Billet Mirrors
Dennis Kirk Part #: 392664
Black Anodized Joker Machine View Tech II Billet Mirrors: Manufacturer part # 03-08 - CNC-machined aluminum stems and heads designed to be lightweight, strong and fully adjustable in every direction. A direct bolt-on fit for 72 and up Harley hand controls (including V-Rod) and most aftermarket hand controls. Exclusive custom-made convex mirror glass provides exceptional rear visibility. Position the mirror once and a twist of a wrench keeps it at the desired tension setting. Completely serviceable swivel post assembly is machined from corrosion-resistant stainless-steel alloy. Mounting hardware is included. VIEW TECH II: Small round head provides a minimalist, custom look and Joker's "pocketed" aircraft milling design along the stem for lightness. Made in the U.S.A.. Sold each. Universal mounting for left or right side , Mirror Width (glass only): 2-1/4". Mirror Height (glass only): 2-1/4". Stem Height: 4-1/4". Stem Offset: 3-1/4". Thread Size: 5/16" x 24 (right handed thread). Glass Tint: Clear. Glass Type: Flat. 03-08
1 on Hand
More Info/Options for Black Anodized Joker Machine View Tech II Billet Mirrors
|
|
|
|
|
|
|
|
|
|
