Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

GMA Engineering - Brakes

$408.99 Anodized GMA Engineering Millenium Series 4-Piston Rear Calipers Dennis Kirk Part #: 1900245 Anodized GMA Engineering Millenium Series 4-Piston Rear Calipers: Manufacturer part # GMAFLTM - Add style and shine to a high-visibility area. Made of high-quality 6061 T-6S aluminum. Made in the U.S.A... GMAFLTM 1 on Hand More Info/Options for Anodized GMA Engineering Millenium Series 4-Piston Rear Calipers

$350.99 Billet Aluminum GMA Engineering 4-Piston Rear Custom Billet Aluminum Caliper Dennis Kirk Part #: H191677 Billet Aluminum GMA Engineering 4-Piston Rear Custom Billet Aluminum Caliper: Manufacturer part # GMA402ST - GMA's mission is to provide high performance, high quality products, priced competitively for the ultimate customer satisfaction of the Harley-Davidson motorcyle rider and enthusiast. Beautiful and functional. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2 and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Brake pads are included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors, NOTE: For replacement rear brake pads use:, H19848 - DP pads (set of 2), H192500 - GMA pads (set of 4). GMA402ST 1 on Hand More Info/Options for Billet Aluminum GMA Engineering 4-Piston Rear Custom Billet Aluminum Caliper

$563.99 Chrome GMA Engineering Millenium Series 4-Piston Rear Calipers Dennis Kirk Part #: 1900246 Chrome GMA Engineering Millenium Series 4-Piston Rear Calipers: Manufacturer part # GMAFLTMC - Add style and shine to a high-visibility area. Made of high-quality 6061 T-6S aluminum. Made in the U.S.A... GMAFLTMC 2 on Hand More Info/Options for Chrome GMA Engineering Millenium Series 4-Piston Rear Calipers

$375.99 Front Only/Each GMA Engineering 11.5 in. Designer Floating Brake Rotor Dennis Kirk Part #: 198144 Front Only/Each GMA Engineering 11.5 in. Designer Floating Brake Rotor: Noncorroding ductile iron rotors offer greater stopping power for all 4-piston calipers. Chrome T-6 aluminum center carrier with finned design. Made in the U.S.A... 1 on Hand More Info/Options for Front Only/Each GMA Engineering 11.5 in. Designer Floating Brake Rotor

$749.99 Front Only/Pair GMA Engineering 11.5 in. Designer Floating Brake Rotor Dennis Kirk Part #: 198145 Front Only/Pair GMA Engineering 11.5 in. Designer Floating Brake Rotor: Noncorroding ductile iron rotors offer greater stopping power for all 4-piston calipers. Chrome T-6 aluminum center carrier with finned design. Made in the U.S.A... 1 on Hand More Info/Options for Front Only/Pair GMA Engineering 11.5 in. Designer Floating Brake Rotor

$1619.99 GMA Engineering 1 1/2 in. Wide Inside-Out Brake/Pulley System 805404 Dennis Kirk Part #: 805404 GMA Engineering 1 1/2 in. Wide Inside-Out Brake/Pulley System 805404: Manufacturer part # GMABPST1 - Features a direct bolt-on design; no welding or machining. Combines the rear brake system with the drive pulley. Allows for a clean, open view of the rear wheel. System includes a polished, CNC-machined billet aluminum 70-tooth pulley, a chrome ductile floating rotor, a chrome 4-piston caliper assembly with brackets and a stainless steel brake line. Pulley has a ducted fan design to help cool the caliper and rotor. Fits with stock swingarm using 16-, 17- and 18-inch wheels with OEM pulley bolt pattern. A rear pulley spacer is available for converting the GMA 1 1/2" pulley to 1 1/8" when running a narrow belt. Matching front rotors are available separately (DS-360227, DS-360228, DS-330060 / DS-330061). Inside-out brake/pulley systems use replacement brake pads PART #DS-350064. Made the in U.S.A.. , NOTE: U.S. Des. Patent #6,283,255, NOTE: Year application listed for right side drive customs refers to the style of pulley/rotor and caliper used in this kit., NOTE: Some Softail models with 61- or 65-tooth rear pulleys may require the use of 132-tooth rear belt and 70-tooth upper and lower belt guards., NOTE: May require custom axle spacers when used with wide rims or custom applications. NOTE: This item ships in 3-4 days after the order is placed.. GMABPST1 1 on Hand More Info/Options for GMA Engineering 1 1/2 in. Wide Inside-Out Brake/Pulley System 805404

$1671.99 GMA Engineering 1 1/8 in. Wide Inside-Out Brake/Pulley System 805405 Dennis Kirk Part #: 805405 GMA Engineering 1 1/8 in. Wide Inside-Out Brake/Pulley System 805405: Manufacturer part # GMABPST1BA - Features a direct bolt-on design; no welding or machining. Combines the rear brake system with the drive pulley. Allows for a clean, open view of the rear wheel. System includes a polished, CNC-machined billet aluminum 70-tooth pulley, a chrome ductile floating rotor, a chrome 4-piston caliper assembly with brackets and a stainless steel brake line. Pulley has a ducted fan design to help cool the caliper and rotor. Fits with stock swingarm using 16-, 17- and 18-inch wheels with OEM pulley bolt pattern. A rear pulley spacer is available for converting the GMA 1 1/2" pulley to 1 1/8" when running a narrow belt. Matching front rotors are available separately (DS-360227, DS-360228, DS-330060 / DS-330061). Inside-out brake/pulley systems use replacement brake pads PART #DS-350064. Made the in U.S.A.. , NOTE: U.S. Des. Patent #6,283,255, NOTE: Year application listed for right side drive customs refers to the style of pulley/rotor and caliper used in this kit., NOTE: Some Softail models with 61- or 65-tooth rear pulleys may require the use of 132-tooth rear belt and 70-tooth upper and lower belt guards., NOTE: May require custom axle spacers when used with wide rims or custom applications. NOTE: This item ships in 3-4 days after the order is placed.. GMABPST1BA 1 on Hand More Info/Options for GMA Engineering 1 1/8 in. Wide Inside-Out Brake/Pulley System 805405

$1693.99 GMA Engineering 1 1/8 in. Wide Inside-Out Brake/Pulley System 805406 Dennis Kirk Part #: 805406 GMA Engineering 1 1/8 in. Wide Inside-Out Brake/Pulley System 805406: Manufacturer part # GMABPSTM1 - Features a direct bolt-on design; no welding or machining. Combines the rear brake system with the drive pulley. Allows for a clean, open view of the rear wheel. System includes a polished, CNC-machined billet aluminum 70-tooth pulley, a chrome ductile floating rotor, a chrome 4-piston caliper assembly with brackets and a stainless steel brake line. Pulley has a ducted fan design to help cool the caliper and rotor. Fits with stock swingarm using 16-, 17- and 18-inch wheels with OEM pulley bolt pattern. A rear pulley spacer is available for converting the GMA 1 1/2" pulley to 1 1/8" when running a narrow belt. Matching front rotors are available separately (DS-360227, DS-360228, DS-330060 / DS-330061). Inside-out brake/pulley systems use replacement brake pads PART #DS-350064. Made the in U.S.A.. , NOTE: U.S. Des. Patent #6,283,255, NOTE: Year application listed for right side drive customs refers to the style of pulley/rotor and caliper used in this kit., NOTE: Some Softail models with 61- or 65-tooth rear pulleys may require the use of 132-tooth rear belt and 70-tooth upper and lower belt guards., NOTE: May require custom axle spacers when used with wide rims or custom applications. NOTE: This item ships in 3-4 days after the order is placed.. GMABPSTM1 1 on Hand More Info/Options for GMA Engineering 1 1/8 in. Wide Inside-Out Brake/Pulley System 805406

$30.99 GMA Engineering Brake Pads for GMA A Calipers 1900462 Dennis Kirk Part #: 1900462 GMA Engineering Brake Pads for GMA A Calipers 1900462: Manufacturer part # GMAAPADS - Top-quality pads made specifically for GMA calipers.. GMAAPADS 1 on Hand More Info/Options for GMA Engineering Brake Pads for GMA A Calipers 1900462

$147.99 GMA Engineering Chrome Billet Aluminum Rear Master Cylinder 1900463 Dennis Kirk Part #: 1900463 GMA Engineering Chrome Billet Aluminum Rear Master Cylinder 1900463: Manufacturer part # GMAMC1KC - The ultimate in high performance, made right here in the U.S.A.. High-tech master cylinders CNC-machined from aircraft aluminum alloy. A 5/8" diameter bore produces more pressure for increased stopping power. Designed to work with GMA and other aftermarket calipers with dual pistons. Rebuild kit also available. , Included items 1. (1) Rear master cylinder. 2. (1) Rubber boot. 3. (1) Brake line fitting. 4. (8) Crush washers. 5. (1) Instruction sheet. , These use OEM NO. 42455-80 cap gasket (DK#H57-95) and OEM NO. 41764-70 (small hole) or OEM NO. 41764-58 (large hole) boots.. , Kelsey-Hayes type master cylinder.. GMAMC1KC 2 on Hand More Info/Options for GMA Engineering Chrome Billet Aluminum Rear Master Cylinder 1900463

$147.99 GMA Engineering Chrome Billet Aluminum Rear Master Cylinder 1900464 Dennis Kirk Part #: 1900464 GMA Engineering Chrome Billet Aluminum Rear Master Cylinder 1900464: Manufacturer part # GMAMC1WC - The ultimate in high performance, made right here in the U.S.A.. High-tech master cylinders CNC-machined from aircraft aluminum alloy. A 5/8" diameter bore produces more pressure for increased stopping power. Designed to work with GMA and other aftermarket calipers with dual pistons. Rebuild kit also available. , Included items 1. (1) Rear master cylinder. 2. (1) Rubber boot. 3. (1) Brake line fitting. 4. (8) Crush washers. 5. (1) Instruction sheet. , These use OEM NO. 42455-80 cap gasket (DK#H57-95) and OEM NO. 41764-70 (small hole) or OEM NO. 41764-58 (large hole) boots.. , Kelsey-Hayes type master cylinder.. GMAMC1WC 1 on Hand More Info/Options for GMA Engineering Chrome Billet Aluminum Rear Master Cylinder 1900464

$917.99 GMA Engineering Chrome Finish Millenium Series 4-Piston Front Double-Disc Calipers 197306 Dennis Kirk Part #: 197306 GMA Engineering Chrome Finish Millenium Series 4-Piston Front Double-Disc Calipers 197306: Each piece is CNC machined from 606IT6 Aircraft quality aluminum, hand-polished with a beautiful chrome finish. The chrome plating of billet aluminum is a difficult and demanding process. Every effort has been made to ensure compatibility and provide quality chrome parts. Add style and shine to a high-visibility area. Uses stock brake line and is designed to accept 10MM banjo bolt. Made in the U.S.A... Expected Soon More Info/Options for GMA Engineering Chrome Finish Millenium Series 4-Piston Front Double-Disc Calipers 197306

$458.99 GMA Engineering Chrome Finish Millenium Series 4-Piston Front Single-Disc Caliper 197301 Dennis Kirk Part #: 197301 GMA Engineering Chrome Finish Millenium Series 4-Piston Front Single-Disc Caliper 197301: Add style and shine to a high-visibility area. Made of high-quality 6061 T-6S aluminum. Made in the U.S.A... Expected Soon More Info/Options for GMA Engineering Chrome Finish Millenium Series 4-Piston Front Single-Disc Caliper 197301

$577.99 GMA Engineering Chrome Finish Millenium Series 4-Piston Rear Caliper 197308 Dennis Kirk Part #: 197308 GMA Engineering Chrome Finish Millenium Series 4-Piston Rear Caliper 197308: Add style and shine to a high-visibility area. Made of hand polished, aircraft-quality 6061 T-6S aluminum. Beautiful chrome finish The chrome plating of billet aluminum is a difficult and demanding process; every effort has been made to ensure compatibility and provide quality chrome parts. Made in the U.S.A... 2 on Hand More Info/Options for GMA Engineering Chrome Finish Millenium Series 4-Piston Rear Caliper 197308

$394.99 GMA Engineering Custom 4-Piston Rear Caliper 198136 Dennis Kirk Part #: 198136 GMA Engineering Custom 4-Piston Rear Caliper 198136: Manufacturer part # GMAR10Q - Billet aluminum with "fin" design and a satin finish. Hanger brackets and brake pads included. Made in the U.S.A.. For rigid frames with 10" rotor (3/4" axle), , NOTE: Not recommended for use with imported stainless steel rotors, , NOTE: Requires use of 5/8 in. bore master cylinder, , For replacement rear brake pads use: , H19848 - DP pads (set of 2), H192500 - GMA pads (set of 4). GMAR10Q 1 on Hand More Info/Options for GMA Engineering Custom 4-Piston Rear Caliper 198136

$606.99 GMA Engineering Custom Billet Aluminum Front Brake Caliper 198135 Dennis Kirk Part #: 198135 GMA Engineering Custom Billet Aluminum Front Brake Caliper 198135: Manufacturer part # GMA200FDD - Billet aluminum dual-disc caliper set with a fin design and a satin finish. Require the factory 11/16 in. bore (84 and later) or the GMA 3/4 in. handlebar master cylinder. Brake pads included. Made in the U.S.A.. NOTE: Not recommended for use with imported stainless steel rotors NOTE: When installing new calipers, always check spoke-to-caliper clearance. GMA200FDD 1 on Hand More Info/Options for GMA Engineering Custom Billet Aluminum Front Brake Caliper 198135

$296.99 GMA Engineering Custom Billet Aluminum Rear Brake 2-Piston Caliper 1900459 Dennis Kirk Part #: 1900459 GMA Engineering Custom Billet Aluminum Rear Brake 2-Piston Caliper 1900459: Manufacturer part # GMAR10CC - Beautiful and functional. Fits all rigid frames with 10" rotor. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Includes correct axle spacer, anti-rotation anchor arm, mounting bracket and hardware. Brake pads are also included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For rigid frames with 10 in. rotor, NOTE: For replacement rear brake pads use:, 1900462 - GMA pads (set of 2), 193135 - SBS pads (set of 2), H19847 or 191610 - DP pads (set of 2). GMAR10CC 1 on Hand More Info/Options for GMA Engineering Custom Billet Aluminum Rear Brake 2-Piston Caliper 1900459

CLOSEOUT! Was: $135.99 Now: $122.39 GMA Engineering Ductile Iron Brake Rotor for 2-Piston Calipers 1900460 Dennis Kirk Part #: 1900460 GMA Engineering Ductile Iron Brake Rotor for 2-Piston Calipers 1900460: Manufacturer part # GMAR84R - Get dramatic improvement in stopping power with GMA rotors. Developed with 2 1/2 years of R&D. Ductile iron alloy is CNC-machined to form a rotor that is superior to stainless steel for increased friction coefficiency, extended wear and heat dissipation. Highly resistant to warping. Grooved surface vents hot gases for more consistent action under hard braking. , NOTE: GMA does NOT recommend polishing or chrome plating rotors. Warranty is voided if rotors are polished or plated., NOTE: Diameter: 11 1/2 in.. GMAR84R 1 on Hand More Info/Options for GMA Engineering Ductile Iron Brake Rotor for 2-Piston Calipers 1900460

$135.99 GMA Engineering Ductile Iron Brake Rotors 198137 Dennis Kirk Part #: 198137 GMA Engineering Ductile Iron Brake Rotors 198137: Manufacturer part # GMAR10RQ - GMA rotors are a dramatic improvement in stopping power. CNC-machined from a ductile iron alloy that is superior to stainless steel for increased friction coefficiency, extended wear and heat dissipation. Highly resistant to warping. Grooved surface vents hot gases for more consistent action under hard braking. For GMA four-piston calipers. , , NOTE: GMA does NOT recommend polishing or chrome-plating rotors. Warranty is voided if rotors are polished or plated. GMAR10RQ 1 on Hand More Info/Options for GMA Engineering Ductile Iron Brake Rotors 198137

$270.99 GMA Engineering Ductile Iron Brake Rotors 198138 Dennis Kirk Part #: 198138 GMA Engineering Ductile Iron Brake Rotors 198138: Manufacturer part # GMAR77DDQ - GMA rotors are a dramatic improvement in stopping power. CNC-machined from a ductile iron alloy that is superior to stainless steel for increased friction coefficiency, extended wear and heat dissipation. Highly resistant to warping. Grooved surface vents hot gases for more consistent action under hard braking. For GMA four-piston calipers. , , NOTE: GMA does NOT recommend polishing or chrome-plating rotors. Warranty is voided if rotors are polished or plated. GMAR77DDQ 1 on Hand More Info/Options for GMA Engineering Ductile Iron Brake Rotors 198138

GMA Engineering - Brakes