Edelbrock - Fuel & Intake

$72.99 Edelbrock 3-Piece Flange Manifold 1671
Manufacturer: Edelbrock
Dennis Kirk Part #: H170933
Edelbrock 3-Piece Flange Manifold: Manufacturer part # 1671 - Required with Edelbrock Performer Heads. High-flow rectangular shape silicone embossed intake gaskets, bolts, carburator flange gaskets or spigot grommet and vacuum fittings included. For flange mount or spigot mount carbs stock width.. 1671
1 on hand

More Info/Options for Edelbrock 3-Piece Flange Manifold 1671

Edelbrock - Fuel & Intake

$72.99 Edelbrock 3-Piece Spigot Manifold-Stock 1670
Manufacturer: Edelbrock
Dennis Kirk Part #: H17019
Edelbrock 3-Piece Spigot Manifold-Stock: Manufacturer part # 1670 - Must be used with Edelbrock heads. Designed to match Edelbrock cylinder heads and optimize the flow of the heads to achieve optimum results. Features rectangular .125 in. raised runner configuration. Intakes each come with silicone-embossed intake gaskets, bolts, carburetor flange gaskets or spigot grommet and vacuum fittings (if needed). , NOTE: , Manifolds will not accept S&S carbs larger than the Super E series unless noted. 1670
1 on hand

More Info/Options for Edelbrock 3-Piece Spigot Manifold-Stock 1670

Edelbrock - Fuel & Intake

$65.99 Edelbrock Inductive RPM Sensor 71937
Manufacturer: Edelbrock
Dennis Kirk Part #: 407395
Edelbrock Inductive RPM Sensor: Manufacturer part # 71937 - A must-have when adding tachometers or nitrous systems. Nocutting/splicing into factory wiring. Easy three-wire installation. Works with 04-07 carbureted and EFI engines, , NOTE: Required when installing Edelbrock Wet Nitrous Systems on HD 04-07 models. 71937
4 on hand

More Info/Options for Edelbrock Inductive RPM Sensor 71937

Edelbrock - Fuel & Intake

$876.99 Edelbrock Nitrous System with 12 oz. Bottle 71916
Manufacturer: Edelbrock
Dennis Kirk Part #: H16022
Edelbrock Nitrous System with 12 oz. Bottle: Manufacturer part # 71916 - Nitrous oxide is used only on demand for serious horsepower at the push of a button. A huge horsepower increase; a true 35 horsepower increase at the rear wheel. Complete kits are designed specifically for the individual application. Electronic module and rpm sensor activate the nitrous at 4500 rpm to reduce chance of engine damaging detonation. The cause of most engine failures with other nitrous systems is the activation of nitrous at too low of an rpm -- this is prevented with the Performer system. The fuel solenoid is just before the nitrous solenoid for a more accurate delivery of fuel and nitrous, and more reliable use. Stainless steel jets will not erode like brass jets found in other systems. Order the correct nitrous plate for your carburetor application and a dual outlet petcock; sold separately. Twelve-ounce bottle kits require correct mounting brackets; sold separately. Bottles feature a highly polished finish. , NOTE: , Not for use on fuel-injected bikes. 71916
1 on hand

More Info/Options for Edelbrock Nitrous System with 12 oz. Bottle 71916

Edelbrock - Fuel & Intake

$922.99 Edelbrock Nitrous System with 2 lb. Bottle 71915
Manufacturer: Edelbrock
Dennis Kirk Part #: H16021
Edelbrock Nitrous System with 2 lb. Bottle: Manufacturer part # 71915 - The Most Complete Bolt-On Nitrous Kits Available. Nitrous oxide is used only on demand for serious horsepower at the push of a button. A huge horsepower increase; a true 35 horsepower increase at the rear wheel. Complete kits are designed specifically for the individual application. Electronic module and rpm sensor activate the nitrous at 4500 rpm to reduce chance of engine damaging detonation. The cause of most engine failures with other nitrous systems is the activation of nitrous at too low of an rpm -- this is prevented with the Performer system. The fuel solenoid is just before the nitrous solenoid for a more accurate delivery of fuel and nitrous, and more reliable use. Stainless steel jets will not erode like brass jets found in other systems. Order the correct nitrous plate for your carburetor application and a dual outlet petcock; sold separately. Bottles feature a highly polished finish. NOTE:Not for use on fuel-injected bikes The two-piece bracket shown to the right of the picture is not included in the kit and it is not necessary. There is a Frame-mount stamped steel bracket instead. NOTE: This item ships 3-4 days after the order is placed.. 71915
1 on hand

More Info/Options for Edelbrock Nitrous System with 2 lb. Bottle 71915

Edelbrock - Fuel & Intake

Edelbrock - Fuel & Intake