|
|
$16.99
Daytona Twin Tec Ignition Power Relay Kit 201558
Dennis Kirk Part #: 201558
Daytona Twin Tec Ignition Power Relay Kit 201558: Manufacturer part # 1030 - Fixes starting problems in motorcycles using high compression ratios or with large displacement engines that use Twin Tec single-fire installations. If the power draw of the starter motor, single-fire coil, long length of wire between the battery, engine stop-run switch and the coil leaves too little power at the coil to fire the engine, this kit solves the problem by supplying full battery voltage to the coil. Includes a high-quality relay, wire and terminals.. 1030
1 on Hand
More Info/Options for Daytona Twin Tec Ignition Power Relay Kit 201558
|
|
|
|
$275.99
Daytona Twin Tec Plug-In Ignition Module 201025
Dennis Kirk Part #: 201025
Daytona Twin Tec Plug-In Ignition Module 201025: Manufacturer part # TC88A - FOR TWIN CAM/SPORTSTER 04-06 CARB MODELS WITH SINGLE 12-PIN CONNECTOR Copy: Include two advance curve families that will work with stock and modified engines. Selectable multi-spark mode gives fast starts and smooth cruising. Come with rotary switches that control mode select, timing adjustments, advance slope and rpm limit (in 100-rpm steps). Coils feature designed-in protection against short circuits. Must be used with OEM coils that have less than 1 ohm primary resistance, and low-resistance spiral- or carbon-core suppression-type plug wires. Order optional USB interface (Part No. 201555) and software to modify the ignition timing (programs available on web site www.daytona-twintec.com/index.html). Use 12V power adapters (Part No. 201529) to power up the modules when removed from the bike (sold separately). Easy-to-follow instructions included. Made in the U.S.A. , , NOTE: Will not work on fuel-injected models. TC88A
1 on Hand
More Info/Options for Daytona Twin Tec Plug-In Ignition Module 201025
|
|
|
|
$275.99
Daytona Twin Tec Plug-In Ignition Module 201025
Dennis Kirk Part #: 201025
Daytona Twin Tec Plug-In Ignition Module 201025: Manufacturer part # TC88A - FOR TWIN CAM/SPORTSTER 04-06 CARB MODELS WITH SINGLE 12-PIN CONNECTOR Copy: Include two advance curve families that will work with stock and modified engines. Selectable multi-spark mode gives fast starts and smooth cruising. Come with rotary switches that control mode select, timing adjustments, advance slope and rpm limit (in 100-rpm steps). Coils feature designed-in protection against short circuits. Must be used with OEM coils that have less than 1 ohm primary resistance, and low-resistance spiral- or carbon-core suppression-type plug wires. Order optional USB interface (Part No. 201555) and software to modify the ignition timing (programs available on web site www.daytona-twintec.com/index.html). Use 12V power adapters (Part No. 201529) to power up the modules when removed from the bike (sold separately). Easy-to-follow instructions included. Made in the U.S.A. , , NOTE: Will not work on fuel-injected models. TC88A
1 on Hand
More Info/Options for Daytona Twin Tec Plug-In Ignition Module 201025
|
|
|
|
|
|
CLEARANCE!
Was: $54.99
Now: $41.24
Daytona Twin Tec Single-Fire Mini Ignition Coil 201561
Dennis Kirk Part #: 201561
Daytona Twin Tec Single-Fire Mini Ignition Coil 201561: Manufacturer part # MINICOIL - Miniature coils for custom motorcycles where installation space is limited and a single-fire coil is required for maximum performance. 3-ohm primary for Twin Tec ignitions and most newer aftermarket single-fire ignitions. Coils are available separately (two coils required per application). Measure 2.4 in. L x 2.3 in. H x 1.6 in. W and weigh 7 oz.. Also used for replacement for Part No. 201560. MINICOIL
1 on Hand
More Info/Options for Daytona Twin Tec Single-Fire Mini Ignition Coil 201561
|
|
|
|
|
|
|
|
|
|
$360.99
Daytona Twin Tec Twin Cam Ignition Kits 201021
Dennis Kirk Part #: 201021
Daytona Twin Tec Twin Cam Ignition Kits 201021: Manufacturer part # 3008 - Daytona Twin Tec LLC has a simple philosophy - do one thing and do it well. Kit for Twin Cam 88 99-03 carb models features an ignition module, spark plug wires and single-fire coil. Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors. Five rotary switches for timing adjustments, advanced slope and rpm limits. Digital rpm limiter (set in 100-rpm steps). Selectable multi-spark mode for quick starts and smooth running. Coil outputs are protected against short circuits. Optional PC link cable and software available for programming custom curves, programs available at (www.daytona-twintec.com). Instructions included. Made in the U.S.A.. For models listed with two 6-pin ignition module connectors. 3008
1 on Hand
More Info/Options for Daytona Twin Tec Twin Cam Ignition Kits 201021
|
|
|
|
$417.99
Daytona Twin Tec Twin Cam Ignition Kits 201093
Dennis Kirk Part #: 201093
Daytona Twin Tec Twin Cam Ignition Kits 201093: Manufacturer part # 3088 - Includes new 12-pin TC88A ignition module, PC link cable, single-fire coil, and spark plug wires. Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors. Five rotary switches for timing adjustments, advanced slope and rpm limits. Digital rpm limiter (set in 100-rpm steps). Selectable multi-spark mode for quick starts and smooth running. Coil outputs are protected against short circuits. Instructions included. Made in the U.S.A... 3088
1 on Hand
More Info/Options for Daytona Twin Tec Twin Cam Ignition Kits 201093
|
|
|
|
$341.99
H20886 Daytona Twin Tec External Ignition Module Kit
Dennis Kirk Part #: H20886
H20886 Daytona Twin Tec External Ignition Module Kit: Manufacturer part # 3005 - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Optional software available (programs available on web site at www.daytona-twintec.com/index.html) for programming custom curves. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A... 3005
1 on Hand
More Info/Options for H20886 Daytona Twin Tec External Ignition Module Kit
|
|
|
|
$360.99
H20895 Daytona Twin Tec External Ignition Module Kit
Dennis Kirk Part #: H20895
H20895 Daytona Twin Tec External Ignition Module Kit: Manufacturer part # 3005S - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A.. Optional software available for programming custom curves, programs available at (www.daytona-twintec.com). 3005S
1 on Hand
More Info/Options for H20895 Daytona Twin Tec External Ignition Module Kit
|
|
|
|
$360.99
H20896 Daytona Twin Tec External Ignition Module Kit
Dennis Kirk Part #: H20896
H20896 Daytona Twin Tec External Ignition Module Kit: Manufacturer part # 3006 - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A.. Optional software available for programming custom curves, programs available at (www.daytona-twintec.com). 3006
Expected Soon
More Info/Options for H20896 Daytona Twin Tec External Ignition Module Kit
|
|
|
|
$360.99
H20898 Daytona Twin Tec External Ignition Module Kit
Dennis Kirk Part #: H20898
H20898 Daytona Twin Tec External Ignition Module Kit: Manufacturer part # 3007 - Kits include ignition module, single-fire coil, 8.5mm spark plug wires and instructions. Two advance curve families with adjustable advance curves to accommodate stock to wild engine modifications. Unit has four rotary switches for adjusting timing, single/dual fire, rpm limit and two LED indicator lights. Digitally set rpm limit (in 100-rpm steps); selectable single- or dual-fire mode. Selectable multi-spark mode for quick starting and smooth cruising. Coil outputs protected against short circuits. Uses the tachometer wire for the PC link and comes with a connector. Made in the U.S.A.. Optional software available for programming custom curves, programs available at (www.daytona-twintec.com). 3007
Expected Soon
More Info/Options for H20898 Daytona Twin Tec External Ignition Module Kit
|
|
