TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Cycle Shack - Exhaust

$15.99 Cycle Shack 1 3/4 in. Baffle w/Fiberglass 1524 Manufacturer: Cycle Shack Dennis Kirk Part #: 27381 Cycle Shack 1 3/4 in. Baffle w/Fiberglass: Manufacturer part # 1524 - For Cycle Shack 1 3/4 in. diameter drag pipes. Silencer comes with fiberglass. Sold Each.. 1524 5 on hand More Info/Options for Cycle Shack 1 3/4 in. Baffle w/Fiberglass 1524 Cycle Shack - Exhaust

$263.99 Cycle Shack 1 3/4 in. Chrome Slash-Cut M Pipe Exhaust System PHD112 SS Manufacturer: Cycle Shack Dennis Kirk Part #: 43670 Cycle Shack 1 3/4 in. Chrome Slash-Cut M Pipe Exhaust System: Manufacturer part # PHD112 SS - Classic-style chrome-finished pipes feature 2 1/2 in. muffler bodies with removable baffles. 80-85 models require the use of brake pedal stop, PART NO. 27-359. Mounting bracket included, replacement available separately order PART NO. 27-355. NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. PHD112 SS 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Chrome Slash-Cut M Pipe Exhaust System PHD112 SS Cycle Shack - Exhaust

$294.99 Cycle Shack 1 3/4 in. Drag Pipes p4402300 Manufacturer: Cycle Shack Dennis Kirk Part #: 4403627 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # p4402300 - Traditional-style drag pipes are made from one continuous piece of 16-gauge tubing and finished with high-quality chrome. Mounting bracket included. 1 3/4" pipes accept OEM or Cycle Shack heat shields. Baffles sold separately (part number 27381). Slash-down tips. Made in the U.S.A.. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. p4402300 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes p4402300 Cycle Shack - Exhaust

$294.99 Cycle Shack 1 3/4 in. Drag Pipes p4402300 4403628 Manufacturer: Cycle Shack Dennis Kirk Part #: 4403628 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # p4402300 - DennisKirk Part # 4403628 - Traditional-style drag pipes are made from one continuous piece of 16-gauge tubing and finished with high-quality chrome. Mounting bracket included. 1 3/4" pipes accept OEM or Cycle Shack heat shields. Baffles sold separately (part number 27381). Slash-out tips. Made in the U.S.A.. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. p4402300 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes p4402300 4403628 Cycle Shack - Exhaust

$273.99 Cycle Shack 1 3/4 in. Drag Pipes PHD137 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402300 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # PHD137 - Traditional-style drag pipes are made from one continuous piece of 16-gauge tubing and finished with high-quality chrome. Mounting bracket included. 1 3/4" pipes accept OEM or Cycle Shack heat shields. Baffles sold separately --27-381. Slash-out tip. Made in the U.S.A.. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD137 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes PHD137 Cycle Shack - Exhaust

$273.99 Cycle Shack 1 3/4 in. Drag Pipes PHD137 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402301 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # PHD137 SD - Traditional-style drag pipes are made from one continuous piece of 16-gauge tubing and finished with high-quality chrome. Mounting bracket included. 1 3/4" pipes accept OEM or Cycle Shack heat shields. Baffles sold separately -- 27-381. Slash-down tip. Made in the U.S.A.. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD137 SD 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes PHD137 SD Cycle Shack - Exhaust

$256.99 Cycle Shack 1 3/4 in. Drag Pipes PHD148 A Manufacturer: Cycle Shack Dennis Kirk Part #: 4402494 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # PHD148 A - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. Straight-through chrome style and sound. Slash-down tip. Includes channel mounts and hardware to mount pipes directly to OEM brackets. 40" long. Baffles sold separately--27-381. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. , , Included Items:. , 1. (2) Drag pipes. , 2. (4) Mounting brackets. , 3. (1) Exhaust clamp. , 4. (2) 5/16-18 x 1 1/8" hex bolts. , 5. (5) 5/16"-18 T-bolts. , 6. (1) 5/16"-18 x 3/4" hex bolt. , 7. (13) 5/16"-18 lock nuts.. PHD148 A 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes PHD148 A Cycle Shack - Exhaust

$224.99 Cycle Shack 1 3/4 in. Drag Pipes PHD161 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402310 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # PHD161 - These one-piece 40 in. pipes mount to the OEM bracket. Fit all XL models 07-08 including 883C/1200C. Slash-out tip. Baffles sold separately - 27381. 07-08 1 3/4 in. pipes accept OEM heat shields. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD161 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes PHD161 Cycle Shack - Exhaust

$224.99 Cycle Shack 1 3/4 in. Drag Pipes PHD161 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402311 Cycle Shack 1 3/4 in. Drag Pipes: Manufacturer part # PHD161 SD - These one-piece 40 in. pipes mount to the OEM bracket. Fit all XL models 07-08 including 883C/1200C. Baffles sold separately-27381. Slash-down tip. 07-08 1 3/4 in. pipes accept OEM heat shields. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD161 SD 2 on hand More Info/Options for Cycle Shack 1 3/4 in. Drag Pipes PHD161 SD Cycle Shack - Exhaust

$210.99 Cycle Shack 1 3/4 in. Shotgun Drag Pipes PHD134 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402320 Cycle Shack 1 3/4 in. Shotgun Drag Pipes: Manufacturer part # PHD134 - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. 1 3/4" pipes accept OEM heat shields. Slash-out tip. Baffles sold separately -- 27-381. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD134 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Shotgun Drag Pipes PHD134 Cycle Shack - Exhaust

$210.99 Cycle Shack 1 3/4 in. Shotgun Drag Pipes PHD134 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402321 Cycle Shack 1 3/4 in. Shotgun Drag Pipes: Manufacturer part # PHD134 SD - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. 1 3/4" pipes accept OEM heat shields. Slash-down tip. Baffles sold separately -- 27-381. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD134 SD 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Shotgun Drag Pipes PHD134 SD Cycle Shack - Exhaust

$281.99 Cycle Shack 1 3/4 in. Shotgun Drag Pipes PHD144 Manufacturer: Cycle Shack Dennis Kirk Part #: 4402325 Cycle Shack 1 3/4 in. Shotgun Drag Pipes: Manufacturer part # PHD144 - Each pipe made of one continuous piece of 16-gauge tubing with a bright nickel-chrome finish. 1 3/4" pipes accept OEM heat shields. Slash-out tip. Baffles sold separately -- 27-381. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. PHD144 2 on hand More Info/Options for Cycle Shack 1 3/4 in. Shotgun Drag Pipes PHD144 Cycle Shack - Exhaust

CLEARANCE! Was: $283.99 Now: $170.39 Cycle Shack 1 3/4 in. Shotgun-Style Slash Down M Pipes PHD139 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4400004 Cycle Shack 1 3/4 in. Shotgun-Style Slash Down M Pipes: Manufacturer part # PHD139 SD - Made from one continuous peice of chromed 16-guage tubing for traditional good looks. Feature 2 1/2 in. muffler bodies with non-removable baffles. Includes mounting bracket. Original factory heat shields are retained. Made in the U.S.A.. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD139 SD 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Shotgun-Style Slash Down M Pipes PHD139 SD Cycle Shack - Exhaust

CLEARANCE! Was: $274.99 Now: $164.99 Cycle Shack 1 3/4 in. Shotgun-Style Tapered M Pipes PHD139 TA Manufacturer: Cycle Shack Dennis Kirk Part #: 4400005 Cycle Shack 1 3/4 in. Shotgun-Style Tapered M Pipes: Manufacturer part # PHD139 TA - Made from one continuous peice of chromed 16-guage tubing for traditional good looks. Feature 2 1/2 in. muffler bodies with non-removable baffles. Includes mounting bracket. Original factory heat shields are retained. Made in the U.S.A.. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD139 TA 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Shotgun-Style Tapered M Pipes PHD139 TA Cycle Shack - Exhaust

CLEARANCE! Was: $294.99 Now: $176.99 Cycle Shack 1 3/4 in. Shotgun-Style Turn-Out M Pipes PHD139 TO Manufacturer: Cycle Shack Dennis Kirk Part #: 4400006 Cycle Shack 1 3/4 in. Shotgun-Style Turn-Out M Pipes: Manufacturer part # PHD139 TO - Made from one continuous peice of chromed 16-guage tubing for traditional good looks. Feature 2 1/2 in. muffler bodies with non-removable baffles. Includes mounting bracket. Original factory heat shields are retained. Made in the U.S.A.. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD139 TO 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Shotgun-Style Turn-Out M Pipes PHD139 TO Cycle Shack - Exhaust

$325.99 Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System PHD135 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402295 Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System: Manufacturer part # PHD135 SD - Traditional style chrome "M" pipes are made of one continuous piece of 16-gauge tubing. All pipes have 2 1/2" muffler bodies and come with removable baffles (except tapered and turn-out styles). 1 3/4" pipes accept OEM or Cycle Shack heat shields. Come complete with all necessary mounting hardware; gaskets not included. Slash-down tip. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing... PHD135 SD 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System PHD135 SD Cycle Shack - Exhaust

$344.99 Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System PHD136 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402315 Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System: Manufacturer part # PHD136 SD - Chrome-plated finish with 2 1/2" muffler bodies and all-steel muffler cores. Rear pipe is a slip-fit and attaches to the OEM hanger bracket. Front pipe is one-piece and mounting hardware is included. For heat shields use: 44-02326 for the front and 44-02327 for the rear. Slash-down tip. Made in the USA. , , NOTE: Baffles are removable on Slash-cut systems only., , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD136 SD 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System PHD136 SD Cycle Shack - Exhaust

$284.99 Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System PHD160 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402305 Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System: Manufacturer part # PHD160 SD - Chrome one-piece design with 2 1/2" muffler bodies. Requires the OEM exhaust bracket to mount. Slash-down tip. Reuse OEM heat shields. , , NOTE: , Baffles are removable on Slash-cut systems only., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing... , , Included Items:. , 1. (2) Drag pipes. , 2. (4) 5/16"-18 T-bolts. , 3. (4) 5/16"-18 lock nuts. PHD160 SD 1 on hand More Info/Options for Cycle Shack 1 3/4 in. Slash Down M Pipe Exhaust System PHD160 SD Cycle Shack - Exhaust

$317.99 Cycle Shack 1 3/4 in. Slash Down Shotgun-Style M Pipe Exhaust System PHD142 SD Manufacturer: Cycle Shack Dennis Kirk Part #: 4402324 Cycle Shack 1 3/4 in. Slash Down Shotgun-Style M Pipe Exhaust System: Manufacturer part # PHD142 SD - Made from one continuous piece of nickel-chrome finished 16-gauge tubing for traditional good looks. Feature 2 1/2" muffler bodies with removable baffles (except tapered style). O2 sensor bungs for 07-09 models are included. Original factory heat shields are retained. 1 3/4" pipes include mounting brackets and removable steel baffles. Slash-down tip. Made in the U.S.A., , Included Items: , 1. (2) Drag Pipes, 2. (2) Mounting Brackets, 3. (2) Exhaust Clamps, 4. (4) 5/16"-18 T-Bolts, 5. (2) 5/16"-18 x 1" Hex Bolts, 6. (6) 5/16"-18 Lock Nuts, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See the Chems/Lubes section for products that will help to prevent or remove the blueing.. PHD142 SD