Custom Chrome - Tanks
|
|
$246.99
Custom Chrome Bobber Style Gas Tank 600154
Manufacturer: Custom Chrome
Dennis Kirk Part #: 183355
Custom Chrome Bobber Style Gas Tank: Manufacturer part # 600154 - An absolutely beautiful new tank designed with keen styling of Cole Foster Salinas Boyz Customs. The tank started a life on the hugely popular Blue Bobber Bike, seen in almost every motorcycle publication in 2002. The tank features a mini pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted to any custom application. Fuel capacity is 2.35 gallons. NOTE: The applications require the front frame dash mount to be cut off and rear screw hole modified DIMENISIONS: Length: 17 1/4 in.. Width: 11 1/2 in.. Tunnel Length: 19 in.. TUNNEL WIDTH: Front: 2 11/16 in.. Rear: 2 3/4 in.. TUNNEL DEPTH Front: 6 1/4 in.. Rear: 1/4 in.. Tank Height: 10 1/2 in. Fuel Petcock: Left Front Petcock Thread Size: 22mm Gas Cap Type: Threaded INCLUDED ITEMS: One tank. Four rubber isolation pads. One front tank mount with bolts. Six mounting shims. Four 5/16" - 18 x 1-1/4" hex bolts. Six 5/16" flat washers. Two spacer washers. One pop-up threaded gas cap), , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 600154
1 on hand
More Info/Options for Custom Chrome Bobber Style Gas Tank 600154
Custom Chrome - Tanks
|
|
|
|
CLEARANCE!
Was: $246.99
Now: $222.29
Custom Chrome Bobber Style Gas Tank 600157
Manufacturer: Custom Chrome
Dennis Kirk Part #: 183354
Custom Chrome Bobber Style Gas Tank: Manufacturer part # 600157 - An absolutely beautiful new tank designed with keen styling of Cole Foster Salinas Boyz Customs. The tank started a life on the hugely popular Blue Bobber Bike, seen in almost every motorcycle publication in 2002. The tank features a mini pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted to any custom application. Fuel capacity is 2.35 gallons. Accepts 22mm petcock. NOTE: The applications require the front frame dash mount to be cut off and rear screw hole modified DIMENISIONS: Length: 17 1/4 in.. Width: 11 1/2 in.. Tunnel Length: 19 in.. TUNNEL WIDTH: Front: 2 11/16 in.. Rear: 2 3/4 in.. TUNNEL DEPTH Front: 6 1/4 in.. Rear: 1/4 in.. Tank Height: 10 1/2 in. Fuel Petcock: Left Front Petcock Thread Size: 22mm Gas Cap Type: Threaded INCLUDED ITEMS: One tank. Four rubber isolation pads. One front tank mount with bolts. Six mounting shims. Four 5/16" - 18 x 1-1/4" hex bolts. Six 5/16" flat washers. Two spacer washers. One pop-up threaded gas cap), , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 600157
1 on hand
More Info/Options for Custom Chrome Bobber Style Gas Tank 600157
Custom Chrome - Tanks
|
|
|
|
$18.99
Custom Chrome Chrome Replacement Petcock 25252
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18262
Custom Chrome Chrome Replacement Petcock: Manufacturer part # 25252 - Chrome-plated petcocks is an exact duplicate of the original-style gas valve used on 75-01 models. Comes complete with chromed nut and a nylon mesh filter screen. Available in a left-side spigot style that can be used at the front or rear of the gas tank. Fits tanks with 22mm outside threads.. 25252
More than 10 on hand
More Info/Options for Custom Chrome Chrome Replacement Petcock 25252
Custom Chrome - Tanks
|
|
|
|
$246.99
Custom Chrome Custom Bobber Style Gas Tank 600155
Manufacturer: Custom Chrome
Dennis Kirk Part #: 183257
Custom Chrome Custom Bobber Style Gas Tank: Manufacturer part # 600155 - An absolutely beautiful new tank designed with keen styling of Cole Foster Salinas Boyz Customs. The tank started a life on the hugely popular Blue Bobber Bike, seen in almost every motorcycle publication in 2002. The tank features a mini pop-up gas cap, and a unique raised tapered bead down the center of the tank. Each tank has been designed to fit to stock frames but can also be easily adapted to any custom application. Fuel capacity is 2.35 gallons. NOTE: The applications require the front frame dash mount to be cut off and rear screw hole modified DIMENISIONS: Length: 17 1/4 in.. Width: 11 1/2 in.. Tunnel Length: 19 in.. TUNNEL WIDTH: Front: 2 11/16 in.. Rear: 2 3/4 in.. TUNNEL DEPTH Front: 6 1/4 in.. Rear: 1/4 in.. Tank Height: 10 1/2 in. Fuel Petcock: Left Front Petcock Thread Size: 22mm Gas Cap Type: Threaded INCLUDED ITEMS: One tank. Four rubber isolation pads. One front tank mount with bolts. Six mounting shims. Four 5/16" - 18 x 1-1/4" hex bolts. Six 5/16" flat washers. Two spacer washers. One pop-up threaded gas cap. , , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 600155
2 on hand
More Info/Options for Custom Chrome Custom Bobber Style Gas Tank 600155
Custom Chrome - Tanks
|
|
|
|
|
|
$170.99
Custom Chrome Fat Bob Extra Capacity Gas Tank 15294
Manufacturer: Custom Chrome
Dennis Kirk Part #: H181029
Custom Chrome Fat Bob Extra Capacity Gas Tank: Manufacturer part # 15294 - Fits FXST 84, all models with split tanks 85-99. Six-gallon tanks flatside fat bob gas tank. The classic Fat Bob profile, but a bit wider and taller than stock tanks. Unpainted steel. , , NOTE: Flexible steel, leather or plastic tank panels should be used to cover the gap between the tanks due to the slightly different shape, , NOTE: Does not include dash mounting spacer kit, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15294
7 on hand
More Info/Options for Custom Chrome Fat Bob Extra Capacity Gas Tank 15294
Custom Chrome - Tanks
|
|
|
|
CLEARANCE!
Was: $245.99
Now: $221.39
Custom Chrome Fat Bob Extra Capacity Gas Tank with Cam-Style Gas Bungs 15603
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18031
Custom Chrome Fat Bob Extra Capacity Gas Tank with Cam-Style Gas Bungs: Manufacturer part # 15603 - Fits FXST 84, all models with split tanks 85-99. Six-gallon tanks for extended touring range. The classic Fat Bob profile, but a bit wider and taller than stock tanks. Includes dash mounting spacer kit to accommodate the increased height. Unpainted steel. , NOTE: Flexible steel, leather or plastic tank panels should be used to cover the gap between the tanks due to the slightly different shape, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15603
3 on hand
More Info/Options for Custom Chrome Fat Bob Extra Capacity Gas Tank with Cam-Style Gas Bungs 15603
Custom Chrome - Tanks
|
|
|
|
$218.99
Custom Chrome Fat Bob Extra Capacity Gas Tank with Screw-Style Gas Bungs 15602
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18030
Custom Chrome Fat Bob Extra Capacity Gas Tank with Screw-Style Gas Bungs: Manufacturer part # 15602 - Fits Fat Bob 48-84 mounts. Six-gallon tanks for extended touring range. The classic Fat Bob profile, but a bit wider and taller than stock tanks. Includes dash mounting spacer kit to accommodate the increased height. Unpainted steel. , NOTE: Flexible steel, leather or plastic tank panels should be used to cover the gap between the tanks due to the slightly different shape, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15602
1 on hand
More Info/Options for Custom Chrome Fat Bob Extra Capacity Gas Tank with Screw-Style Gas Bungs 15602
Custom Chrome - Tanks
|
|
|
|
$237.99
Custom Chrome Fat Bob Gas Tank 25551
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18026
Custom Chrome Fat Bob Gas Tank: Manufacturer part # 25551 - Today, Custom Chrome is the worlds largest independent supplier of aftermarket parts and accessories Classic Fat Bob look for all FXR 92-94 models (except Dyna Glide). 4.0 gallon capacity. Looks like split tanks, but is actually a one-piece welded assembly with late-style twin screw top filler necks and 13/16 in. external-thread gas valve fittings. Bolts directly to the stock mounts and accepts all FL-style dash assemblies (except Cat Eye) when the appropriate dash base is used. Included with each tank is a super-flex speedo cable and chrome tank divider panel. Equipped with internal emission control system connections for use on vehicles with fuel tank emission devices (i.e. California models). Unpainted steel . , NOTE: , H18026 tank requires removal of solder from vent tube prior to installation when connecting fuel tank emission control device., , NOTE: , Speedo-cable supplied with tank will not fit our Drag Specialties 4 5/8 in 2-1 speedometers. If using the Drag Specialties speedometers a cable with a 12 mm nut must be pruchased separately from our front wheel speedometer cable chart., , NOTE: Tank does not include dash, speedometer, or gas caps, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 25551
5 on hand
More Info/Options for Custom Chrome Fat Bob Gas Tank 25551
Custom Chrome - Tanks
|
|
|
|
$151.99
Custom Chrome Fat Bob Screw Top Gas Tank 15295
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18022
Custom Chrome Fat Bob Screw Top Gas Tank: Manufacturer part # 15295 - Available in either 3.5 or 5.0 gallon version. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for trouble-free service. Both tanks accept both the dash for Low Rider models and the large speedo dash for FXWG models. Made with the 83-00 screw-on type filler necks to allow use of the widest range of gas cap designs. 13/16 in. external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Unpainted steel. Replaces OEM numbers 61219-83, 61425-83, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15295
2 on hand
More Info/Options for Custom Chrome Fat Bob Screw Top Gas Tank 15295
Custom Chrome - Tanks
|
|
|
|
$151.99
Custom Chrome Fat Bob Screw Top Gas Tank 15296
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18023
Custom Chrome Fat Bob Screw Top Gas Tank: Manufacturer part # 15296 - Available in either 3.5 or 5.0 gallon version. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for trouble-free service. Both tanks accept both the dash for Low Rider models and the large speedo dash for FXWG models. Made with the 83-00 screw-on type filler necks to allow use of the widest range of gas cap designs. 13/16 in. external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Unpainted steel. Replaces OEM numbers 61213-83, 61229-83, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15296
2 on hand
More Info/Options for Custom Chrome Fat Bob Screw Top Gas Tank 15296
Custom Chrome - Tanks
|
|
|
|
$180.99
Custom Chrome Fat Bob Standard Gas Tank 15289
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18010
Custom Chrome Fat Bob Standard Gas Tank: Manufacturer part # 15289 - Available in 3.5 and 5.0 gallon versions. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for years of trouble-free service. Both tanks accept the dash for Low Rider models or the large speedo dash for FXWG models. Pre-82 cam-lock style filler necks allow use of the widest range of gas cap designs. 13/16 in. external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Shipped in a divided box for protection. Unpainted steel. Replaces OEM numbers 61218-67A, 61426-67A, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15289
1 on hand
More Info/Options for Custom Chrome Fat Bob Standard Gas Tank 15289
Custom Chrome - Tanks
|
|
|
|
$170.99
Custom Chrome Fat Bob Standard Gas Tank 25549
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18027
Custom Chrome Fat Bob Standard Gas Tank: Manufacturer part # 25549 - Available in 3.5 and 5.0 gallon versions. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for years of trouble-free service. Both tanks accept the dash for Low Rider models or the large speedo dash for FXWG models. Pre-82 cam-lock style filler necks allow use of the widest range of gas cap designs. 22 mm external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Shipped in a divided box for protection. Unpainted steel. Replaces OEM numbers 61211-67 and 61228-67. , WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed before being painted to eliminate potential problems. 25549
2 on hand
More Info/Options for Custom Chrome Fat Bob Standard Gas Tank 25549
Custom Chrome - Tanks
|
|
|
|
|
|
|
|
$123.49
Custom Chrome High Tunnel King Tank 19639
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18016
Custom Chrome High Tunnel King Tank: Manufacturer part # 19639 - King tanks are made 2 in. wider than stock. Provides extra mileage and is just wide enough to make it look great. 3.1 gallon, high-tunnel tanks are equipped with stock mounts that bolt to the stock frame mounts. 3.5 gallon, low-tunnel tank has tab mounts for universal custom applications. Unpainted steel, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 19639
5 on hand
More Info/Options for Custom Chrome High Tunnel King Tank 19639
Custom Chrome - Tanks
|
|
|
|
$327.99
Custom Chrome Indian Larry Dished Tank 670800
Manufacturer: Custom Chrome
Dennis Kirk Part #: 183356
Custom Chrome Indian Larry Dished Tank: Manufacturer part # 670800 - Used on the Indian Larry bike in the build-off series. Uses late-model 22mm fuel valves. Easy mounting by drilling of the backbone and can be adapted to many styles of stock and custom frames. Cam-style gas cap. DIMENISIONS: Length: 16 in.. Width: 10-1/2 in.. Tunnel Length: 15-1/2 in.. TUNNEL WIDTH: Front: 2-3/4 in.. Rear: 2 in.. TUNNEL DEPTH Front: 2 1/4 in.. Rear: 2 in.. Tank Height: 11 in. Fuel Petcock: Right Rear Petcock Thread Size: 22mm Gas Cap Type: Cam Style, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 670800
1 on hand
More Info/Options for Custom Chrome Indian Larry Dished Tank 670800
Custom Chrome - Tanks
|
|
|
|
$327.99
Custom Chrome Indian Larry Dished Tank 670801
Manufacturer: Custom Chrome
Dennis Kirk Part #: 183258
Custom Chrome Indian Larry Dished Tank: Manufacturer part # 670801 - As seen on TV. These are the tanks used on the Indian Larry bike in the build-off series. Old-school looks with modern production techniques bring you the cool style you and at the price you can afford. Comes in 3.5-gallon size using late model 22mm fuel valves. Easy mounting by drilling of the backbone and can be adapted to many styles of stock and custom frames. DIMENISIONS: Length: 17 3/4 in.. Width: 12 1/4 in.. Tunnel Length: 15 1/2 in.. TUNNEL WIDTH: Front: 2 1/2 in.. Rear: 2 3/8 in.. TUNNEL DEPTH Front: 2 1/4 in.. Rear: 1/2 in.. Tank Height: 8 3/4 in. Fuel Petcock: Right Rear Petcock Thread Size: 22mm Gas Cap Type: Cam Style, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 670801
1 on hand
More Info/Options for Custom Chrome Indian Larry Dished Tank 670801
Custom Chrome - Tanks
|
|
|
|
$52.99
Custom Chrome Inferno Mini Gas Cap 27485
Manufacturer: Custom Chrome
Dennis Kirk Part #: 182756
Custom Chrome Inferno Mini Gas Cap: Manufacturer part # 27485 - Small 2 1/2 in diameter with three dimensional flames design look great on any bike. Chrome-plated die-cast construction with ratcheting mechanism that prevents over tightening. Fit all OEM gas tanks from 1982-1995 and most aftermarket gas tanks. , , Note: Matched cap set, left and right hand thread. 27485
6 on hand
More Info/Options for Custom Chrome Inferno Mini Gas Cap 27485
Custom Chrome - Tanks
|
|
|
|
Custom Chrome - Tanks
|
