$180.99Competition Werkes Stainless Steel Exhaust System p4402060
Manufacturer: Competition Werkes
Dennis Kirk Part #: 4402060
Competition Werkes Stainless Steel Exhaust System: Manufacturer part # p4402060 - Hand-finished for a true GP look. Stainless system weighs just 17 lbs. 4 ozs.. Install in minutes. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p4402060 2 on hand
$712.99Competition Werkes Stainless Steel USA Slip-Ons p4403049
Manufacturer: Competition Werkes
Dennis Kirk Part #: 4403049
Competition Werkes Stainless Steel USA Slip-Ons: Manufacturer part # p4403049 - Feature stainless steel construction throughout. These slip-ons are lighter than stock and less restricted for more flow and increased horsepower. All pipes are made from welded straight-section tubing (not bent) for genuine one-off works style. Heat shield available separately, Part NO. 44-03050. Made in the U.S.A.. Fender kit not included. , , Included Items: , (1) Canister, (1) Mid-pipe, (1) 2 in. Stainless Clamp, (1) 6x25 Allen Bolt, (1) Washer, (1) 6m Nylock Nut, , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. p4403049 1 on hand
$409.99Competition Werkes Stainless Steel USA Slip-Ons p4403049 4403045
Manufacturer: Competition Werkes
Dennis Kirk Part #: 4403045
Competition Werkes Stainless Steel USA Slip-Ons: Manufacturer part # p4403049 - DennisKirk Part # 4403045 - Feature stainless steel construction throughout. These slip-ons are lighter than stock and less restricted for more flow and increased horsepower. All pipes are made from welded straight-section tubing (not bent) for genuine one-off works style. Heat shields available separately. Made in the U.S.A.. , , Included Items:, (1) Slip on exhaust, (1) Stabilizing bracket, (1) Stainless clamp, (2) 8 x 16 bolts, (2) Flat washers. , , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. p4403049 1 on hand
$569.99Competition Werkes Stainless Steel USA Slip-Ons p4403049 4403046
Manufacturer: Competition Werkes
Dennis Kirk Part #: 4403046
Competition Werkes Stainless Steel USA Slip-Ons: Manufacturer part # p4403049 - DennisKirk Part # 4403046 - Feature stainless steel construction throughout. These slip-ons are lighter than stock and less restricted for more flow and increased horsepower. All pipes are made from welded straight-section tubing (not bent) for genuine one-off works style. Heat shields available separately. Made in the U.S.A.. , , INCLUDED ITEMS: , (2) Canisters, (1) Mid-pipe, (3) Stainless steel clamps, (1) 8x16 bolt, (1) 8mm Lock Nut, (2) Washers. Optional hanger bracket (part # WS1005-HB) available through WerkesUSA. , , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. p4403049 2 on hand
$332.99Competition Werkes Stainless Steel USA Slip-Ons p4403049 4403047
Manufacturer: Competition Werkes
Dennis Kirk Part #: 4403047
Competition Werkes Stainless Steel USA Slip-Ons: Manufacturer part # p4403049 - DennisKirk Part # 4403047 - Feature stainless steel construction throughout. These slip-ons are lighter than stock and less restricted for more flow and increased horsepower. All pipes are made from welded straight-section tubing (not bent) for genuine one-off works style. Heat shields available separately. Made in the U.S.A.. , , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , Included Items: . , 1. (1) WerkesUSA canister. , 2. (1) WerkesUSA Mid pipe. , 3. (1) Stainless steel clamps. p4403049 1 on hand
$661.99Competition Werkes Stainless Steel USA Slip-Ons p4403049 4403048
Manufacturer: Competition Werkes
Dennis Kirk Part #: 4403048
Competition Werkes Stainless Steel USA Slip-Ons: Manufacturer part # p4403049 - DennisKirk Part # 4403048 - Feature stainless steel construction throughout. These slip-ons are lighter than stock and less restricted for more flow and increased horsepower. All pipes are made from welded straight-section tubing (not bent) for genuine one-off works style. Heat shields available separately. Made in the U.S.A.. , , Included Items: , (2) GP canisters, (2) Mid-pipes, (4) Stainless clamps. , , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. p4403049 1 on hand
$114.99Competition Werkes USA Stainless Steel Slip-Ons Optional Heat Shield p4403050
Manufacturer: Competition Werkes
Dennis Kirk Part #: 4403050
Competition Werkes USA Stainless Steel Slip-Ons Optional Heat Shield : Manufacturer part # p4403050 - Feature stainless steel construction throughout. These slip-ons are lighter than stock and less restricted for more flow and increased horsepower. All pipes are made from welded straight-section tubing (not bent) for genuine one-off works style. Heat shields available separately. Made in the U.S.A... p4403050 1 on hand
