|
|
|
|
$315.95
Cobra 1 5/8 in. Drag Pipe Exhaust System with Slash Cut Tip 1161SC
Manufacturer: Cobra
Dennis Kirk Part #: 444819
Cobra 1 5/8 in. Drag Pipe Exhaust System with Slash Cut Tip: Manufacturer part # 1161SC - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they won't interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. All muffled systems feature 2 1/2 in. staggered duals; all systems exit on the right-hand side of the motorcycle. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Baffles are nonremovable. Full-length chrome plated heat shields included with this system, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1161SC
1 on hand
More Info/Options for Cobra 1 5/8 in. Drag Pipe Exhaust System with Slash Cut Tip 1161SC
Cobra - Exhaust
|
|
|
|
$229.95
Cobra 1 5/8 in. Drag Pipes Exhaust System with Slash Cut Tip 1261
Manufacturer: Cobra
Dennis Kirk Part #: 440262
Cobra 1 5/8 in. Drag Pipes Exhaust System with Slash Cut Tip: Manufacturer part # 1261 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Complete systems also include chrome headpipes. Drag systems exit on the right-hand side of the motorcycle. Slash-Cut Tip Drag Pipes are 1 5/8 in. diameter. All Cobra Boulevard Drag Pipes have removable baffles. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. Short chrome heat shields included with this system. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product.. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. Exhaust gaskets are not included, but are recommended every time a system is installed. This system requires two of our Part No. 26-1063. INCLUDED ITEMS: (1) Front exhaust. (1) Rear exhaust. (1) 3/4 in. aluminum spacer. (3) 1 3/4 in. heat shields. (1) Instruction sheet.. 1261
Expected Soon
More Info/Options for Cobra 1 5/8 in. Drag Pipes Exhaust System with Slash Cut Tip 1261
Cobra - Exhaust
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$369.99
Cobra 2 1/4 in. Loboy Staggered Hotrod Exhaust System 6800
Manufacturer: Cobra
Dennis Kirk Part #: 448285
Cobra 2 1/4 in. Loboy Staggered Hotrod Exhaust System: Manufacturer part # 6800 - Full-length, 215° wraparound heat shields make pipes and mufflers both appear to be 2 1/4 in. in diameter (pipes are actually 1 3/4 in.). All components (head pipes, mufflers and heat shields) are triple chrome plated. Take out a single screw and the baffles can be removed. Trouble-free installation -- all necessary mounting hardware and instructions are included. Made in the U.S.A.. , FOR HOT ROD TIPS ORDER: , Long slash-cut 44-5883, Short slash-cut 44-5884, Upper-cut 44-5885, , NOTE: Fits with floorboards, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , NOTE: For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6800
1 on hand
More Info/Options for Cobra 2 1/4 in. Loboy Staggered Hotrod Exhaust System 6800
Cobra - Exhaust
|
|
|
|
|
|
|
|
|
|
|
|
$279.99
Cobra 2 in. Drag Pipe Slip-On 2273
Manufacturer: Cobra
Dennis Kirk Part #: 4400217
Cobra 2 in. Drag Pipe Slip-On: Manufacturer part # 2273 - All Cobra Boulevard exhaust systems are designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands, and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Made from high-grade steel and durable chrome plating. Better sound and style, with larger and longer muffler bodies than many competitors. Cobra Drag Pipes have removable baffles. 2 in. muffler bodies are used on O.E.M. headpipes. Re-jetting recommended for best performance on carbureted models; a Power Commander should be installed on fuel-injected models. , NOTE: This part fits all 50-state 06-07 versions of this motorcycle plus the 04-05 California-only versions INCLUDED ITEMS: One front muffler. One rear muffler. Two #268-55 clamps. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 2273
4 on hand
More Info/Options for Cobra 2 in. Drag Pipe Slip-On 2273
Cobra - Exhaust
|
|
|
|
$252.95
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 3164SC
Manufacturer: Cobra
Dennis Kirk Part #: 444299
Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip: Manufacturer part # 3164SC - The same craftsmanship and high quality fit, finish and materials as the complete systems. Designed, tested and re-checked for fit to assure you they fit like a glove, retaining the use of all center and sidestands; and that they wont interfere with footpegs, floorboards or any other part of the motorcycle. Better sound and style, with larger, longer muffler bodies than the competition. Staggered dual, 3 in. diameter mufflers exit on the right-hand side of the motorcycle. Muffler bodies are used on the OEM headpipes. No re-jetting necessary although it is recommended for best performance. 2 in. Slash-Cut Tip Drag Pipes feature removable baffle. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 3164SC
Expected Soon
More Info/Options for Cobra 2 in. Drag Pipe Slip-Ons w/Slash-Cut Tip 3164SC
Cobra - Exhaust
|
|
|
|
$334.99
Cobra 2 in. Drag Pipes 6200
Manufacturer: Cobra
Dennis Kirk Part #: 448280
Cobra 2 in. Drag Pipes: Manufacturer part # 6200 - Full-length, 215 degree wraparound heat shields make pipes and mufflers appear to be 2 in. dia. (pipes are actually 1 3/4 in.). All components (head pipes, mufflers and heat shields) are triple chrome plated. Radial slash-cut mufflers. Take out a single screw and the baffles can be removed. Trouble-free installation -- all necessary mounting hardware and instructions are included. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , NOTE: For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6200
1 on hand
More Info/Options for Cobra 2 in. Drag Pipes 6200
Cobra - Exhaust
|
|
