Carlini - Handlebars & Controls

$357.99 Carlini 1 1/2 in. Clean Sweep Tee Bar CS1.50-7
Manufacturer: Carlini
Dennis Kirk Part #: H59784
Carlini 1 1/2 in. Clean Sweep Tee Bar: Manufacturer part # CS1.50-7 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-08 controls. 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , NOTE: New bushings are recommended., , NOTE: Will not fit Touring 08-09 models. CS1.50-7
1 on hand

More Info/Options for Carlini 1 1/2 in. Clean Sweep Tee Bar CS1.50-7

Carlini - Handlebars & Controls

$357.99 Carlini 1 1/2 in. Clean Sweep Tee Bar CS1505
Manufacturer: Carlini
Dennis Kirk Part #: H59782
Carlini 1 1/2 in. Clean Sweep Tee Bar: Manufacturer part # CS1505 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-08 controls. 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , , NOTE: New handlebar busings recommended., , NOTE: Will not fit Touring 08-09 models. CS1505
1 on hand

More Info/Options for Carlini 1 1/2 in. Clean Sweep Tee Bar CS1505

Carlini - Handlebars & Controls

$357.99 Carlini 1 1/2 in. Clean Sweep Tee Bar CS1509
Manufacturer: Carlini
Dennis Kirk Part #: H59786
Carlini 1 1/2 in. Clean Sweep Tee Bar: Manufacturer part # CS1509 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-08 controls. 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , NOTE: New bushings are recommended., , NOTE: Will not fit Touring 08-09 models. CS1509
3 on hand

More Info/Options for Carlini 1 1/2 in. Clean Sweep Tee Bar CS1509

Carlini - Handlebars & Controls

$357.99 Carlini 1 1/2 in. Hoghandle Freeway Bar HHFWY
Manufacturer: Carlini
Dennis Kirk Part #: H59914
Carlini 1 1/2 in. Hoghandle Freeway Bar: Manufacturer part # HHFWY - These big, 1 1/2 in. o.d. bars are the new look in fat bars. Bars are drilled for internal wiring and dimpled. For use with 82-08 handlebar controls. Must use Carlini risers with Carlini bars (see H59916, H59919, H59920). Road King risers are designed to fit under the OEM handlebar cover; new bushings included- see H59920. Risers and bushings sold separately (except Road King Risers, which come with bushings). Made in the U.S.A.. , , NOTE: New bushings are recommended.. HHFWY
Expected Soon

More Info/Options for Carlini 1 1/2 in. Hoghandle Freeway Bar HHFWY

Carlini - Handlebars & Controls

$357.99 Carlini 1 1/2 in. Hoghandle Street Bar HHSB
Manufacturer: Carlini
Dennis Kirk Part #: H59913
Carlini 1 1/2 in. Hoghandle Street Bar: Manufacturer part # HHSB - These big, 1 1/2 in. o.d. bars are the new look in fat bars. Bars are dimpled and drilled for internal wiring. For use with 82-08 handlebar controls. Must use Carlini risers with Carlini bars, Part No.'s: H59916, H59919 and H59920. Road King risers (H59920) are designed to fit under the OEM handlebar cover; new bushings included. Risers and bushings sold separately (except Road King bushings). Made in the U.S.A.. , NOTE: New bushings are recommended., , NOTE: Will not fit Touring 08-09 models. HHSB
1 on hand

More Info/Options for Carlini 1 1/2 in. Hoghandle Street Bar HHSB

Carlini - Handlebars & Controls

$353.99 Carlini 1 1/2 in. Lowdown Bar LD1.50
Manufacturer: Carlini
Dennis Kirk Part #: 594298
Carlini 1 1/2 in. Lowdown Bar: Manufacturer part # LD1.50 - Precision manufactured, 1 1/2 in. diameter chrome-plated tee bars. Both bars are pre-dimpled and pre-drilled for internal wiring. Easy installation with rope routed through wiring passages on Slickback bar. 1/2 in.-13 threads on 3 1/2 in. centers. Made in the U.S.A.. ., , NOTE: Will not fit Touring 08-09 models. LD1.50
2 on hand

More Info/Options for Carlini 1 1/2 in. Lowdown Bar LD1.50

Carlini - Handlebars & Controls

$189.99 Carlini 1 1/2 in. Piston Risers p595571
Manufacturer: Carlini
Dennis Kirk Part #: 595573
Carlini 1 1/2 in. Piston Risers : Manufacturer part # p595571 - Unique chrome-billet risers. Feature bottom mount clamp bolts for a smooth look. 1 1/2 in. tall; drilled and tapped for 1/2 -13 in. bolts (sold separately). 1 1/2 in. clamping area. Sold in pairs. For 1 1/2" Hoghandles H59-913, H59-914.. p595571
1 on hand

More Info/Options for Carlini 1 1/2 in. Piston Risers p595571

Carlini - Handlebars & Controls

$353.99 Carlini 1 1/2 in. Slickback Bar SB1.50
Manufacturer: Carlini
Dennis Kirk Part #: 594297
Carlini 1 1/2 in. Slickback Bar: Manufacturer part # SB1.50 - Precision manufactured, 1 1/2 in. diameter chrome-plated tee bars. Both bars are pre-dimpled and pre-drilled for internal wiring. Easy installation with rope routed through wiring passages on Slickback bar. 1/2 in.-13 threads on 3 1/2 in. centers. Made in the U.S.A.. ., , NOTE: Will not fit Touring 08-09 models. SB1.50
Expected Soon

More Info/Options for Carlini 1 1/2 in. Slickback Bar SB1.50

Carlini - Handlebars & Controls

$357.99 Carlini 1 1/2 in. Super Sweep Tee Bar SPORSTER150
Manufacturer: Carlini
Dennis Kirk Part #: H59290
Carlini 1 1/2 in. Super Sweep Tee Bar: Manufacturer part # SPORSTER150 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended, , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required. ., , NOTE: Will not fit Touring 08-09 models. SPORSTER150
2 on hand

More Info/Options for Carlini 1 1/2 in. Super Sweep Tee Bar SPORSTER150

Carlini - Handlebars & Controls

$357.99 Carlini 1 1/2 in. Super Sweep Tee Bar SS1.50-7
Manufacturer: Carlini
Dennis Kirk Part #: H59291
Carlini 1 1/2 in. Super Sweep Tee Bar: Manufacturer part # SS1.50-7 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. , , NOTE: New handlebar busings recommended. ., , NOTE: Will not fit Touring 08-09 models. SS1.50-7
1 on hand

More Info/Options for Carlini 1 1/2 in. Super Sweep Tee Bar SS1.50-7

Carlini - Handlebars & Controls

$357.99 Carlini 1 1/2 in. Super Sweep Tee Bar SS1509
Manufacturer: Carlini
Dennis Kirk Part #: H59292
Carlini 1 1/2 in. Super Sweep Tee Bar: Manufacturer part # SS1509 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended, , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required. ., , NOTE: Will not fit Touring 08-09 models. SS1509
3 on hand

More Info/Options for Carlini 1 1/2 in. Super Sweep Tee Bar SS1509

Carlini - Handlebars & Controls

$265.99 Carlini 1 1/4 in. Clean Sweep Tee Bar CS1255
Manufacturer: Carlini
Dennis Kirk Part #: H59783
Carlini 1 1/4 in. Clean Sweep Tee Bar: Manufacturer part # CS1255 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-08 controls. 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A, , Bolt Center Distance: 3 1/2 in. (1/2 in.-13 Thread), Dimpled and drilled, , NOTE: New bushings are recommended., , NOTE: Will not fit Touring 08-09 models. CS1255
1 on hand

More Info/Options for Carlini 1 1/4 in. Clean Sweep Tee Bar CS1255

Carlini - Handlebars & Controls

$265.99 Carlini 1 1/4 in. Clean Sweep Tee Bar CS1257
Manufacturer: Carlini
Dennis Kirk Part #: H59785
Carlini 1 1/4 in. Clean Sweep Tee Bar: Manufacturer part # CS1257 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-08 controls. 1/2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , , NOTE: New bushings are recommended., , NOTE: Will not fit Touring 08-09 models. CS1257
2 on hand

More Info/Options for Carlini 1 1/4 in. Clean Sweep Tee Bar CS1257

Carlini - Handlebars & Controls

$265.99 Carlini 1 1/4 in. Clean Sweep Tee Bar CS1259
Manufacturer: Carlini
Dennis Kirk Part #: H59787
Carlini 1 1/4 in. Clean Sweep Tee Bar: Manufacturer part # CS1259 - Clean radius sweep design. Chrome plated diameter handlebar in choice of 1 1/4 in. or 1 1/2 in. diameters. Drilled for internal wiring; rope is routed through the wiring passages for easier wire installation. Dimples allow use with 82-08 controls. 2 in.-13 threads on 3 1/2 in. center risers. Bushings and gauge mounts sold separately. Made in the U.S.A.. , NOTE: New bushings are recommended ., , NOTE: Will not fit Touring 08-09 models. CS1259
1 on hand

More Info/Options for Carlini 1 1/4 in. Clean Sweep Tee Bar CS1259

Carlini - Handlebars & Controls

$245.95 Carlini 1 1/4 in. Freeway Flyer Bars p595570
Manufacturer: Carlini
Dennis Kirk Part #: 595570
Carlini 1 1/4 in. Freeway Flyer Bars: Manufacturer part # p595570 - Ultimate combination of comfort, control and styling. Sleek bends provide great hand and wrist placement for optimum riding position. Clamps and risers available separately. Made in the U.S.A.. , , 1" Diameter Clamping Width: 5 1/8". , Inside Width of Knurling/Outside: 2 11/16". , Drilled for Internal Wiring: Yes. , Dimpled to Prevent Pinching Control Wires: Yes. ., , NOTE: Will not fit Touring 08-09 models. p595570
1 on hand

More Info/Options for Carlini 1 1/4 in. Freeway Flyer Bars p595570

Carlini - Handlebars & Controls

$189.99 Carlini 1 1/4 in. Piston Risers p595571
Manufacturer: Carlini
Dennis Kirk Part #: 595572
Carlini 1 1/4 in. Piston Risers: Manufacturer part # p595571 - Unique chrome-billet risers. Feature bottom mount clamp bolts for a smooth look. 1 1/2 in. tall; drilled and tapped for 1/2 -13 in. bolts (sold separately). Piston risers available for 1 in., 1 1/4 in. and 1 1/2 in. clamping area. Sold in pairs. , , Riser Dimensions:. , Rise: 1 1/2". , Pull-Back: 0". , Handle Bar Clamping Area: 1 1/4". , Drilled and Tapped for 1/2" x 13 mounting bolts. , Center to Center Mounting:. , Length: 3 7/8". , Width: 2 1/2".. p595571
2 on hand

More Info/Options for Carlini 1 1/4 in. Piston Risers p595571

Carlini - Handlebars & Controls

$265.99 Carlini 1 1/4 in. Super Sweep Tee Bar SPORTSTER125
Manufacturer: Carlini
Dennis Kirk Part #: H59293
Carlini 1 1/4 in. Super Sweep Tee Bar: Manufacturer part # SPORTSTER125 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended. , , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required. ., , NOTE: Will not fit Touring 08-09 models. SPORTSTER125
5 on hand

More Info/Options for Carlini 1 1/4 in. Super Sweep Tee Bar SPORTSTER125

Carlini - Handlebars & Controls

$265.99 Carlini 1 1/4 in. Super Sweep Tee Bar SS1257
Manufacturer: Carlini
Dennis Kirk Part #: H59294
Carlini 1 1/4 in. Super Sweep Tee Bar: Manufacturer part # SS1257 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended. , , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required. ., , NOTE: Will not fit Touring 08-09 models. SS1257
1 on hand

More Info/Options for Carlini 1 1/4 in. Super Sweep Tee Bar SS1257

Carlini - Handlebars & Controls

$265.99 Carlini 1 1/4 in. Super Sweep Tee Bars SS1259
Manufacturer: Carlini
Dennis Kirk Part #: H59295
Carlini 1 1/4 in. Super Sweep Tee Bars: Manufacturer part # SS1259 - 2 1/2 in. more pullback than Clean Sweep bars give them a more-raked appearance. They're not only drilled for internal wiring, they come with pull-through string to make wire routing easy. Chrome plated; welds are smoothed and polished by hand to ensure the best possible finish. High-quality packaging keeps bars in prime condition during shipping. New handlebar busings recommended. , , NOTE: 4 3/4 in. and 7 in. rise bars will not clear tank-mounted gauges; custom gauge mounting required. ., , NOTE: Will not fit Touring 08-09 models. SS1259
1 on hand

More Info/Options for Carlini 1 1/4 in. Super Sweep Tee Bars SS1259

Carlini - Handlebars & Controls

$189.99 Carlini 1 in. Piston Risers p595571
Manufacturer: Carlini
Dennis Kirk Part #: 595571
Carlini 1 in. Piston Risers: Manufacturer part # p595571 - Unique chrome-billet risers. Feature bottom mount clamp bolts for a smooth look. 1 1/2 in. tall; drilled and tapped for 1/2 -13 in. bolts (sold separately). Piston risers available for 1 in., 1 1/4 in. and 1 1/2 in. clamping area. Sold in pairs. , , Riser Dimensions:. , Rise: 1 1/2". , Pull-Back: 0". , Handle Bar Clamping Area: 1 ". , Drilled and Tapped for 1/2" x 13 mounting bolts. , Center to Center Mounting:. , Length: 3 7/8". , Width: 2 1/2".. p595571
2 on hand

More Info/Options for Carlini 1 in. Piston Risers p595571

Carlini - Handlebars & Controls

Carlini - Handlebars & Controls