Caliber - Exhaust
|
|
$550.99
Caliber 2 into 1 Exhaust System C2-710
Manufacturer: Caliber
Dennis Kirk Part #: 4401660
Caliber 2 into 1 Exhaust System: Manufacturer part # C2-710 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Varitech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-710
1 on hand
More Info/Options for Caliber 2 into 1 Exhaust System C2-710
Caliber - Exhaust
|
|
|
|
$550.99
Caliber 2 into 1 Exhaust System C2-720
Manufacturer: Caliber
Dennis Kirk Part #: 4401659
Caliber 2 into 1 Exhaust System: Manufacturer part # C2-720 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Varitech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-720
1 on hand
More Info/Options for Caliber 2 into 1 Exhaust System C2-720
Caliber - Exhaust
|
|
|
|
$550.99
Caliber 2 into 1 Exhaust System C2-731
Manufacturer: Caliber
Dennis Kirk Part #: 4401661
Caliber 2 into 1 Exhaust System: Manufacturer part # C2-731 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Varitech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-731
1 on hand
More Info/Options for Caliber 2 into 1 Exhaust System C2-731
Caliber - Exhaust
|
|
|
|
$550.99
Caliber 2 into 1 Exhaust System C2-740
Manufacturer: Caliber
Dennis Kirk Part #: 4401662
Caliber 2 into 1 Exhaust System: Manufacturer part # C2-740 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Varitech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-740
1 on hand
More Info/Options for Caliber 2 into 1 Exhaust System C2-740
Caliber - Exhaust
|
|
|
|
$550.99
Caliber 2-into-1 Exhaust System C-710
Manufacturer: Caliber
Dennis Kirk Part #: H44089
Caliber 2-into-1 Exhaust System: Manufacturer part # C-710 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. C-710
1 on hand
More Info/Options for Caliber 2-into-1 Exhaust System C-710
Caliber - Exhaust
|
|
|
|
$550.99
Caliber 2-into-1 Exhaust System C-720
Manufacturer: Caliber
Dennis Kirk Part #: H44090
Caliber 2-into-1 Exhaust System: Manufacturer part # C-720 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. C-720
1 on hand
More Info/Options for Caliber 2-into-1 Exhaust System C-720
Caliber - Exhaust
|
|
|
|
$550.99
Caliber 2-into-1 Exhaust System C-730
Manufacturer: Caliber
Dennis Kirk Part #: H44091
Caliber 2-into-1 Exhaust System: Manufacturer part # C-730 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. C-730
1 on hand
More Info/Options for Caliber 2-into-1 Exhaust System C-730
Caliber - Exhaust
|
|
|
|
$550.99
Caliber 2-into-1 Exhaust System C-731
Manufacturer: Caliber
Dennis Kirk Part #: H44092
Caliber 2-into-1 Exhaust System: Manufacturer part # C-731 - Boost your motorcycle's power by as much as 25%. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Header pipes are covered by 2 1/2" heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4" and 2" i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C-731
1 on hand
More Info/Options for Caliber 2-into-1 Exhaust System C-731
Caliber - Exhaust
|
|
|
|
$550.99
Caliber 2-into-1 Exhaust System C-740
Manufacturer: Caliber
Dennis Kirk Part #: H44093
Caliber 2-into-1 Exhaust System: Manufacturer part # C-740 - Boost your motorcycle's power by as much as 25 percent. This system features a unique 4-step header design that starts at 1 3/4 in. at the port, steps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler body. Header pipes are covered by 2 1/2 in. heat shields, while the muffler body is covered by a radius-end heat shield. Billet end cap and two sets of patented Caritech baffles (1 3/4 in. and 2 in. i.d.) are included. All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. C-740
1 on hand
More Info/Options for Caliber 2-into-1 Exhaust System C-740
Caliber - Exhaust
|
|
|
|
|
|
|
|
$854.99
Caliber PowerFlow II 2-into-1 p4403648
Manufacturer: Caliber
Dennis Kirk Part #: 4403648
Caliber PowerFlow II 2-into-1: Manufacturer part # p4403648 - Caliber brings the power with the new Powerflow II series. Works perfectly with everything from stock to large displacement engines due to the massive amount of exhaust gases it flows. High-grade steel construction finished with Samsons exclusive Quad Chrome for a lasting shine. Three-stepped header system with removable, full-coverage heat shields. 4 in. muffler with removable 2 in. baffle. O2 sensor ports accept OEM and aftermarket sensors. Mounting hardware included. Made in the U.S.A.. NOTE: FXST, FLST 86-06, FLHT, FLHR, FLTR 85-06 and XL 04-06 applications require the purchase of O2 sensor port plugs.. p4403648
Expected Soon
More Info/Options for Caliber PowerFlow II 2-into-1 p4403648
Caliber - Exhaust
|
|
|
|
$598.99
Caliber Ray Price 2 into 1 Limited Edition Exhaust System C2-752
Manufacturer: Caliber
Dennis Kirk Part #: 4401664
Caliber Ray Price 2 into 1 Limited Edition Exhaust System: Manufacturer part # C2-752 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles included (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-752
1 on hand
More Info/Options for Caliber Ray Price 2 into 1 Limited Edition Exhaust System C2-752
Caliber - Exhaust
|
|
|
|
$598.99
Caliber Ray Price 2 into 1 Limited Edition Exhaust System C2-754
Manufacturer: Caliber
Dennis Kirk Part #: 4401665
Caliber Ray Price 2 into 1 Limited Edition Exhaust System: Manufacturer part # C2-754 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles included (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-754
1 on hand
More Info/Options for Caliber Ray Price 2 into 1 Limited Edition Exhaust System C2-754
Caliber - Exhaust
|
|
|
|
$598.99
Caliber Ray Price 2 into 1 Limited Edition Exhaust System C2-755
Manufacturer: Caliber
Dennis Kirk Part #: 4401666
Caliber Ray Price 2 into 1 Limited Edition Exhaust System: Manufacturer part # C2-755 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles included (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-755
1 on hand
More Info/Options for Caliber Ray Price 2 into 1 Limited Edition Exhaust System C2-755
Caliber - Exhaust
|
|
|
|
$598.99
Caliber Ray Price 2 into 1 Limited Exhaust System C2-751
Manufacturer: Caliber
Dennis Kirk Part #: 4401663
Caliber Ray Price 2 into 1 Limited Exhaust System : Manufacturer part # C2-751 - Designed in the spirit of the Samson Ray Price Nitro Harley Race Team. Blacked-out Caliber 2-into-1 system with a high-tech collector. Boosts your motorcycle's power by 30-35% when properly tuned. This system features a unique 4-step header design that starts at 1 3/4" at the port, steps to 1 7/8", then 2" and finishes off in a 3" muffler body. Black-out, full-coverage heat shields. Chrome billet end cap with Ray Price's signature engraved. Two sets of Varitech baffles included (1 3/4" and 2" i.d.). All necessary mounting hardware and instructions are included for easy installation. Made in the U.S.A.. , Tools Required: , 5/16 in. Combination wrench, 1/4 in. Combination wrench, Ratchet, 6 in. extension and 1/2 in. swivel socket, , Included Items: , Mounting bracket, 5/16 in. flat washer, 5/16 in. - 18 nylock nut (thick), 5/16-18 x 3/4 in. carriage bolt, 1/4 in. -20 x 1/2 in. button head bolt, #10-32 x 3/8 in. button head bolt, 6 - #24 hose clamps, 2 - #44 hose clamps, 1 3/4 in. Veriteck baffle, 2 in. Veriteck baffle, Ray Price 3 in. end cap, NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. C2-751
1 on hand
More Info/Options for Caliber Ray Price 2 into 1 Limited Exhaust System C2-751
Caliber - Exhaust
|
|
|
| |
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS