|
|
$313.99
Black C&A Pro Advantage ADX Race Skis
Dennis Kirk Part #: 10792
Black C&A Pro Advantage ADX Race Skis: Manufacturer part # CA6R1 - C&A PRO brand snowmobile skis are famous for their control, handling and aggressive turning capabilities. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C and A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear/bar runners not included, see runner section for C and A applications 031396, 031397 and 031398. , This ski corners like no other - square grooves 1 inch wide x 18 inches long x 3/8 inch deep are cut into the flat bottom to work with the square keel. Designed for aggressive riders with heavily studded, big-horsepower sleds. 6 inches wide, 43 inches overall length - weighs 5 1/2 pounds without runner. Three year manufacturers warranty. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA6R1
1 on Hand
More Info/Options for Black C&A Pro Advantage ADX Race Skis
|
|
|
|
$408.99
Black C&A Pro Extreme XT Skis
Dennis Kirk Part #: 105894
Black C&A Pro Extreme XT Skis: Manufacturer part # CA7BLK - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90° angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wearrods not included. Extreme XT The most aggressive ski in the industry in terms of quick response in turns. Ski is 7 1/4 in. wide and provides exceptional flotation in deep snow. 1 1/2 in. deep step-design center keel plus two 1/2 in. x 1/2 in. outer keels on each ski. Boxed-in saddle for added strength. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA7BLK
2 on Hand
More Info/Options for Black C&A Pro Extreme XT Skis
|
|
|
|
$351.99
Black C&A Pro Razor RZ Skis
Dennis Kirk Part #: 10939
Black C&A Pro Razor RZ Skis: Manufacturer part # 77020320 - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear rods not included. High-performance Razor Ski with aggressive control for the experienced rider and racer. Offers features similar to the ADX but with the "VEE" shaped outboard. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394 keels, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. 77020320
2 on Hand
More Info/Options for Black C&A Pro Razor RZ Skis
|
|
|
|
$408.99
Blue C&A Pro Extreme XT Skis
Dennis Kirk Part #: 105895
Blue C&A Pro Extreme XT Skis: Manufacturer part # CA7BLU - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90° angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wearrods not included. Extreme XT The most aggressive ski in the industry in terms of quick response in turns. Ski is 7 1/4 in. wide and provides exceptional flotation in deep snow. 1 1/2 in. deep step-design center keel plus two 1/2 in. x 1/2 in. outer keels on each ski. Boxed-in saddle for added strength. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA7BLU
1 on Hand
More Info/Options for Blue C&A Pro Extreme XT Skis
|
|
|
|
$351.99
Blue C&A Pro Razor RZ Skis
Dennis Kirk Part #: 10941
Blue C&A Pro Razor RZ Skis: Manufacturer part # 77260320 - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear rods not included. High-performance Razor Ski with aggressive control for the experienced rider and racer. Offers features similar to the ADX but with the "VEE" shaped outboard. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394 keels, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. 77260320
1 on Hand
More Info/Options for Blue C&A Pro Razor RZ Skis
|
|
|
|
|
|
$35.99
C&A Pro Ski Mounting Kit 105938
Dennis Kirk Part #: 105938
C&A Pro Ski Mounting Kit 105938: Manufacturer part # 76000271 - Ski mounting kit for mounting C&A skis Sold in pairs INCLUDED ITEMS: Two rubber spacers. Two 3/8"-16 x 5" hex bolts. Two 3/8" nylock nuts. Four 3/8" flat washers. Four 3/8" spacer washers. No instructions includes. Sold in pairs.. 76000271
4 on Hand
More Info/Options for C&A Pro Ski Mounting Kit 105938
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$408.99
Green C&A Pro Extreme XT Skis
Dennis Kirk Part #: 105896
Green C&A Pro Extreme XT Skis: Manufacturer part # CA7GRN - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90° angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wearrods not included. Extreme XT The most aggressive ski in the industry in terms of quick response in turns. Ski is 7 1/4 in. wide and provides exceptional flotation in deep snow. 1 1/2 in. deep step-design center keel plus two 1/2 in. x 1/2 in. outer keels on each ski. Boxed-in saddle for added strength. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA7GRN
1 on Hand
More Info/Options for Green C&A Pro Extreme XT Skis
|
|
|
|
$313.99
Red C&A Pro Advantage ADX Race Skis
Dennis Kirk Part #: 10794
Red C&A Pro Advantage ADX Race Skis: Manufacturer part # CA6R7 - C&A PRO brand snowmobile skis are famous for their control, handling and aggressive turning capabilities. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C and A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear/bar runners not included, see runner section for C and A applications 031396, 031397 and 031398. , This ski corners like no other - square grooves 1 inch wide x 18 inches long x 3/8 inch deep are cut into the flat bottom to work with the square keel. Designed for aggressive riders with heavily studded, big-horsepower sleds. 6 inches wide, 43 inches overall length - weighs 5 1/2 pounds without runner. Three year manufacturers warranty. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA6R7
2 on Hand
More Info/Options for Red C&A Pro Advantage ADX Race Skis
|
|
|
|
$408.99
Red C&A Pro Extreme XT Skis
Dennis Kirk Part #: 105897
Red C&A Pro Extreme XT Skis: Manufacturer part # CA7RED - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90° angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wearrods not included. Extreme XT The most aggressive ski in the industry in terms of quick response in turns. Ski is 7 1/4 in. wide and provides exceptional flotation in deep snow. 1 1/2 in. deep step-design center keel plus two 1/2 in. x 1/2 in. outer keels on each ski. Boxed-in saddle for added strength. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA7RED
1 on Hand
More Info/Options for Red C&A Pro Extreme XT Skis
|
|
|
|
$351.99
Red C&A Pro Razor RZ Skis
Dennis Kirk Part #: 10940
Red C&A Pro Razor RZ Skis: Manufacturer part # 77050320 - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear rods not included. High-performance Razor Ski with aggressive control for the experienced rider and racer. Offers features similar to the ADX but with the "VEE" shaped outboard. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394 keels, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. 77050320
1 on Hand
More Info/Options for Red C&A Pro Razor RZ Skis
|
|
|
|
$313.99
Yellow C&A Pro Advantage ADX Race Skis
Dennis Kirk Part #: 105738
Yellow C&A Pro Advantage ADX Race Skis: Manufacturer part # CA6R10 - C&A PRO brand snowmobile skis are famous for their control, handling and aggressive turning capabilities. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C and A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear/bar runners not included, see runner section for C and A applications 031396, 031397 and 031398. , This ski corners like no other - square grooves 1 inch wide x 18 inches long x 3/8 inch deep are cut into the flat bottom to work with the square keel. Designed for aggressive riders with heavily studded, big-horsepower sleds. 6 inches wide, 43 inches overall length - weighs 5 1/2 pounds without runner. Three year manufacturers warranty. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA6R10
2 on Hand
More Info/Options for Yellow C&A Pro Advantage ADX Race Skis
|
|
|
|
$408.99
Yellow C&A Pro Extreme XT Skis
Dennis Kirk Part #: 105898
Yellow C&A Pro Extreme XT Skis: Manufacturer part # CA7YEL - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90° angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wearrods not included. Extreme XT The most aggressive ski in the industry in terms of quick response in turns. Ski is 7 1/4 in. wide and provides exceptional flotation in deep snow. 1 1/2 in. deep step-design center keel plus two 1/2 in. x 1/2 in. outer keels on each ski. Boxed-in saddle for added strength. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA7YEL
1 on Hand
More Info/Options for Yellow C&A Pro Extreme XT Skis
|
|
|
|
$351.99
Yellow C&A Pro Razor RZ Skis
Dennis Kirk Part #: 10942
Yellow C&A Pro Razor RZ Skis: Manufacturer part # 77170320 - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90 degree angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wear rods not included. High-performance Razor Ski with aggressive control for the experienced rider and racer. Offers features similar to the ADX but with the "VEE" shaped outboard. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394 keels, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. 77170320
1 on Hand
More Info/Options for Yellow C&A Pro Razor RZ Skis
|
|
