Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

BUB - Exhaust

$750.99 BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 Manufacturer: BUB Dennis Kirk Part #: 4402541 BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) 2-1 Header. , 2. (1) Front heat shield. , 3. (1) Rear heat shield. , 4. (1) Collector heat shield. , 5. (1) Mount bracket. , 6. (1) Saddle bracket. , 7. (1) Muffler clamp. , 8. (6) Heat shield clamp. , 9. (1) Header clamp. , 10. (1) Collector clamp. , 11. (2) 5/16" lock nuts. , 12. (3) 5/16"-18 x 3 1/4" allen bolt. , 13. (1) 5/16"-18 x 3/4" allen bolt. , 14. (3) 5/16" 3/4" hex bolt. , 15. (9) 5/16" flat washers. , 16. (1) "L" bracket tab. , 17. (2) Transmission spacer. , 18. (1) Rnd. Mounting BKT. spacer. , 19. (1) Saddle bracket gasket. , 20. (1) Instruction sheet. p4402540 1 on hand More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 BUB - Exhaust

$740.99 BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402540 Manufacturer: BUB Dennis Kirk Part #: 4402540 BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - DennisKirk Part # 4402540 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) 2-1 header. , 2. (1) Front heat shield. , 3. (1) Rear heat shield. , 4. (1) Collector heat shield. , 5. (1) 2-1 muffler. , 6. (1) Mounting bracket. , 7. (1) "L" tab bracket. , 8. (1) Saddle bracket. , 9. (1) Saddle bracket gasket , 10. (1) Muffler clamp. , 11. (7) Heat shield clamp. , 12. (1) Collector heat shield clamp. , 13. (1) Header clamp. , 14. (2) 5/16" lock nuts. , 15. (3) 5/16" x 3/4" hex bolts. , 16. (5) 5/16" flat washers. , 17. (5) 3/8" flat washers. , 18. (2) 3/8"x3/4" hex bolt. , 19. (3) 3/8"x1 1/4" hex bolts. , 20. (3) Spacers. , 21. (1) Black zip-tie. , 22. (1) Instruction sheet. p4402540 1 on hand More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402540 BUB - Exhaust

$750.99 BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402542 Manufacturer: BUB Dennis Kirk Part #: 4402542 BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - DennisKirk Part # 4402542 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) 2-1 header. , 2. (1) Front head shield. , 3. (1) Rear heat shield. , 4. (1) Collector head shield. , 5. (1) Mount bracket. , 6. (1) 2-1 saddle bracket. , 7. (1) L-bracket. , 8. (1) Muffler clamp. , 9. (1) Collector head shield clamp. , 10. (7) Heat shield clamps. , 11. (2) 5/16" lock nut. , 12. (3) 5/16"-18 x 3 1/4" allen bolt. , 13. (1) 5/16"-18x 7/8" allen bolt. , 14. (1) 1/4"-20x 1 1/4" allen bolt. , 15. (1) 5/16"-18 x 3/4" hex bolt. , 16. (3) 5/16"-18 x 3/4" hex bolt. , 17. (1) 1/4" flat washer. , 18. (9) 5/16" Flat washers. , 19. (2) Transmission spacer. , 20. (1) Saddle bracket gasket. , 21. (1) Instruction sheet. p4402540 2 on hand More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402542 BUB - Exhaust

$740.99 BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402543 Manufacturer: BUB Dennis Kirk Part #: 4402543 BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - DennisKirk Part # 4402543 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE:, There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , Will not fit with forward controls. , , Included Items:. , 1. (1) BUB 7 2-1 header. , 2. (1) 2-1 Front heat shield. , 3. (1) 2-1 Rear heat shield. , 4. (1) 2-1 Collector heat shield. , 5. (1) 2-1 Muffler. , 6. (1) 2-1 Muffler clamp. , 7. (6) Heat shield clamps. , 8. (1) Collector heat shield clamps. , 9. (1) Header clamp. , 10. (1) "L" bracket. , 11. (1) Mounting bracket. , 12. (1) Saddle bracket. , 13. (1) Saddle bracket gasket. , 14. (3) 5/16-18x3/4" bolt. , 15. (2) 5/16-18 lock nuts. , 16. (5) 5/16" flat washers. , 17. (1) Instruction sheet. p4402540 1 on hand More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402543 BUB - Exhaust

$740.99 BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402544 Manufacturer: BUB Dennis Kirk Part #: 4402544 BUB 2 into 1 Exhaust With Adjustable-Position Muffler: Manufacturer part # p4402540 - DennisKirk Part # 4402544 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) BUB 7 2-1 header , 2. (1) Front heat shield. , 3. (1) Rear heat shield. , 4. (1) Collector heat shield. , 5. (1) Muffler 2-1. , 6. (1) Saddle mount bracket , 7. (1) Slide bracket. , 8. (1) Muffler clamp. , 9. (1) (6) Heat shield clamp. , 10. (1) Collector heat shield clamp. , 11. (4) 5/16-18 x 3/4" hex bolt. , 12. (2) 5/16-18 lock nut. , 13. (6) 5/16" flat washers. , 14. (1) Saddle bracket gasket. , 15. (1) Instruction sheet. p4402540 1 on hand More Info/Options for BUB 2 into 1 Exhaust With Adjustable-Position Muffler p4402540 4402544 BUB - Exhaust

$769.99 BUB 2 into 1 Exhaust with Dual-Position Muffler p4402489 Manufacturer: BUB Dennis Kirk Part #: 4402489 BUB 2 into 1 Exhaust with Dual-Position Muffler: Manufacturer part # p4402489 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; muffler body can be installed with the end cap in the slash-up or slash-down position. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... p4402489 2 on hand More Info/Options for BUB 2 into 1 Exhaust with Dual-Position Muffler p4402489 BUB - Exhaust

$769.99 BUB 2 into 1 Exhaust with Dual-Position Muffler p4402489 4402539 Manufacturer: BUB Dennis Kirk Part #: 4402539 BUB 2 into 1 Exhaust with Dual-Position Muffler: Manufacturer part # p4402489 - DennisKirk Part # 4402539 - Inspired by the world's fastest motorcycle, the BUB 7 2-into-1 system delivers white-knuckle performance and a deep, fierce tone without objectionable noise. Features 1 3/4 in. miter-cut headers that flow into a 2 1/2 in. collector. 2 1/4 in. full-coverage, 220 degree heat shields offer a non-blueing shine. Rear heat shield proudly wears a die-stamped BUB 7 logo. Muffler runs from 2 1/2 in. at the collector to 4 1/2 in. at the end; features reverse-cone tuning technology for impressive mid-range and top-end performance boosts. Muffler is capped off with a slash-cut billet aluminum end cap; muffler body can be installed with the end cap in the slash-up or slash-down position. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... p4402489 1 on hand More Info/Options for BUB 2 into 1 Exhaust with Dual-Position Muffler p4402489 4402539 BUB - Exhaust

$686.99 BUB 2 into 2 Exhaust p4402490 Manufacturer: BUB Dennis Kirk Part #: 4402490 BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Will not fit with floorboards. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. p4402490 Expected Soon More Info/Options for BUB 2 into 2 Exhaust p4402490 BUB - Exhaust

$721.99 BUB 2 into 2 Exhaust p4402490 4402545 Manufacturer: BUB Dennis Kirk Part #: 4402545 BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - DennisKirk Part # 4402545 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) Front pipe. , 2. (1) Front heat shield. , 3. (1) Rear pipe. , 4. (1) Rear heat shield. , 5. (1) Mounting bracket. , 6. (2) Saddle Bracket. , 7. (2) Muffler clamps. , 8. (6) Heat shield clamp. , 9. (4) 5/16" lock nuts. , 10. (3) 5/16"-18 x 3 1/4" allen bolts. , 11. (1) 5/16"-18 x 3/4" allen bolts. , 12. (4) 5/16" 3/4" Hex bolt. , 13. (12) 5/16" flat wsaher. , 14. (2) Transmission spacer. , 15. (2) Saddle bracket gaskets. , 16. (1) Black zip tie. , 17. (1) Instructions. p4402490 1 on hand More Info/Options for BUB 2 into 2 Exhaust p4402490 4402545 BUB - Exhaust

$721.99 BUB 2 into 2 Exhaust p4402490 4402546 Manufacturer: BUB Dennis Kirk Part #: 4402546 BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - DennisKirk Part # 4402546 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) Front Pipe. , 2. (1) Front heat shield. , 3. (1) Rear heat shield. , 4. (1) Mount bracket. , 5. (2) Saddle brackets. , 6. (2) Muffler Clamp. , 7. (6) Heat shield clamps. , 8. (4) 5/16" Lock nut. , 9. (3) 5/16"-18 x 3 1/4" allen bolt. , 10. (1) 5/16-18 x 7/8" allen bolt. , 11. (1) 1/4"-20 x 1 1/4" allen bolt. , 12. (4) 5/16" 3/4" hex bolts. , 13. (1) 1/4" flat washer. , 14. (12) 5/16" Flat washers. , 15. (2) Transmission spacer. , 16. (2) Saddle bracket gasket. , 17. (1) Instructions. p4402490 1 on hand More Info/Options for BUB 2 into 2 Exhaust p4402490 4402546 BUB - Exhaust

$721.99 BUB 2 into 2 Exhaust p4402490 4402547 Manufacturer: BUB Dennis Kirk Part #: 4402547 BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - DennisKirk Part # 4402547 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE:, There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. , See lubrication products for products that will help prevent or remove blueing., , Will not fit with forward controls. , , Included Items:. , 1. (1) Front header , 2. (1) Front heat shield. , 3. (1) Rear header. , 4. (1) Rear heat shield. , 5. (1) Mounting bracket. , 6. (2) Saddle brackets. , 7. (2) Muffler clamps. , 8. (6) Heat shield clamps. , 9. (4) 5/16" lock nuts. , 10. (4) 5/16" 3/4" hex bolts. , 11. (8) 5/16" Flat washers. , 12. (2) Saddle bracket gaskets. , 13. (1) Instruction sheet. p4402490 1 on hand More Info/Options for BUB 2 into 2 Exhaust p4402490 4402547 BUB - Exhaust

$721.99 BUB 2 into 2 Exhaust p4402490 4402548 Manufacturer: BUB Dennis Kirk Part #: 4402548 BUB 2 into 2 Exhaust: Manufacturer part # p4402490 - DennisKirk Part # 4402548 - Inspired by the world's fastest motorcycle, BUB 7 2-into-2 systems feature 1 3/4 in. head pipes with 2 in., 220 degree full-coverage heat shields. Rear heat shield proudly wears a die-stamped BUB 7 logo. Aggressively-styled mufflers start at 1 3/4 in. and swell to 3 1/4 in.; reverse-cone tuning technology provides mid-range and top-end performance boosts. Unique mounting bracket allows muffler body to rotate 90 degree and position slash-cut end cap anywhere between slash-out and slash-down. Includes dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) Front pipe. , 2. (1) Front heat shield. , 3. (1) Rear Pipe. , 4. (1) Rear Heat Shield. , 5. (1) Slide bracket. , 6. (1) Mounting bracket. , 7. (2) Saddle bracket. , 8. (2) Saddle btk. Rubber Gsk.. , 9. (2) Muffler clamp. , 10. (5) Heat shield clamp. , 11. (4) 5/16"-18 locking nut. , 12. (2) 5/16"-18 nylok. , 13. (2) 5/16" 7/8" hex bolt. , 14. (12) 5/16" flat washers. , 15. (1) Instruction sheet. p4402490 2 on hand More Info/Options for BUB 2 into 2 Exhaust p4402490 4402548 BUB - Exhaust

$914.95 BUB 4-into-2 Exhaust System 142100BBG Manufacturer: BUB Dennis Kirk Part #: 4400072 BUB 4-into-2 Exhaust System: Manufacturer part # 142100BBG - Large-diameter free-flowing headers are utilized by the four-into-two header design. 2 1/4 in. diameter oversize heat shield is removable. Features Sleeper-style mufflers with chrome billet aluminum end caps. Optimum performance and a deep low-pitched sound are provided by the spiral louvered core baffles. Include removable baffles. Optional oversize baffles are sold separately. Amazing performance and sound, with significant weight savings is obtained by this outstanding system. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 142100BBG 1 on hand More Info/Options for BUB 4-into-2 Exhaust System 142100BBG BUB - Exhaust

$368.99 BUB Bad Dogs Slip-On Mufflers 051045C Manufacturer: BUB Dennis Kirk Part #: H44383 BUB Bad Dogs Slip-On Mufflers: Manufacturer part # 051045C - Mount using the original hardware to the stock header pipes. Provide the ultimate in style and performance. Sold in pairs. Made in the U.S.A., , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 051045C Expected Soon More Info/Options for BUB Bad Dogs Slip-On Mufflers 051045C BUB - Exhaust

$416.95 BUB Big Bore Silencer A121002 Manufacturer: BUB Dennis Kirk Part #: 432434 BUB Big Bore Silencer: Manufacturer part # A121002 - Purpose-built for 400-750cc ATVs. Silencer improves power and performance. Pulse Diffusion Technology (PDT) internal chambers diffuse engine pulse and suppress sound without sacrificing power. Exhaust note only 1 dB above stock. Aluminum and stainless steel construction to resist corrosion. Expandable E-glass liner. CNC-machined billet end cap and mounting brackets. Unique twin-outlet end cap design and silencer shape. Weigh less than stock. Silencers come with a removable U.S.F.S-approved spark arrestor.. A121002 1 on hand More Info/Options for BUB Big Bore Silencer A121002 BUB - Exhaust

$416.95 BUB Big Bore Silencer A141003 Manufacturer: BUB Dennis Kirk Part #: 432431 BUB Big Bore Silencer: Manufacturer part # A141003 - Purpose-built for 400-750cc ATVs. Silencer improves power and performance. Pulse Diffusion Technology (PDT) internal chambers diffuse engine pulse and suppress sound without sacrificing power. Exhaust note only 1 dB above stock. Aluminum and stainless steel construction to resist corrosion. Expandable E-glass liner. CNC-machined billet end cap and mounting brackets. Unique twin-outlet end cap design and silencer shape. Weigh less than stock. Silencers come with a removable U.S.F.S-approved spark arrestor.. A141003 1 on hand More Info/Options for BUB Big Bore Silencer A141003 BUB - Exhaust

$416.95 BUB Big Bore Silencer A141004 Manufacturer: BUB Dennis Kirk Part #: 432432 BUB Big Bore Silencer: Manufacturer part # A141004 - Purpose-built for 400-750cc ATVs. Silencer improves power and performance. Pulse Diffusion Technology (PDT) internal chambers diffuse engine pulse and suppress sound without sacrificing power. Exhaust note only 1 dB above stock. Aluminum and stainless steel construction to resist corrosion. Expandable E-glass liner. CNC-machined billet end cap and mounting brackets. Unique twin-outlet end cap design and silencer shape. Weigh less than stock. Silencers come with a removable U.S.F.S-approved spark arrestor.. A141004 1 on hand More Info/Options for BUB Big Bore Silencer A141004 BUB - Exhaust

$416.95 BUB Big Bore Silencer A61002 Manufacturer: BUB Dennis Kirk Part #: 432435 BUB Big Bore Silencer: Manufacturer part # A61002 - Purpose-built for 400-750cc ATVs. Silencer improves power and performance. Pulse Diffusion Technology (PDT) internal chambers diffuse engine pulse and suppress sound without sacrificing power. Exhaust note only 1 dB above stock. Aluminum and stainless steel construction to resist corrosion. Expandable E-glass liner. CNC-machined billet end cap and mounting brackets. Unique twin-outlet end cap design and silencer shape. Weigh less than stock. Silencers come with a removable U.S.F.S-approved spark arrestor. INCLUDED ITEMS: Five star clamp #27-55. Two 1" dia x .25" thick spacers. Two billet mounts. Two 8mm x 110mm allen head bolts. Two 8mm x 35mm allen head bolts. Vent tube bracket. Small hose clamp. 2" rubber grommets. 2" mount bushings. Instructions #A39-000028. *Pre-installed in Bub Big Bore exhaust silencer.. A61002