Bergstrom - Suspension & Skis

CLOSEOUT!
Was: $119.50
Now: $71.70
Bergstrom Advantage 3 Triple Point Carbides TP12H06
Manufacturer: Bergstrom
Dennis Kirk Part #: 031861
Bergstrom Advantage 3 Triple Point Carbides: Manufacturer part # TP12H06 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 7 7/8 in. 2nd to End : 4 1/2 in.. TP12H06
1 on hand

More Info/Options for Bergstrom Advantage 3 Triple Point Carbides TP12H06

Bergstrom - Suspension & Skis

CLOSEOUT!
Was: $119.50
Now: $71.70
Bergstrom Advantage 3 Triple Point Carbides TP12Q15
Manufacturer: Bergstrom
Dennis Kirk Part #: 031864
Bergstrom Advantage 3 Triple Point Carbides: Manufacturer part # TP12Q15 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 19 3/4 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x (2) 2 in., (2) 1 1/2 in. Number of Studs: 4 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 4 7/8 in. 2nd to 3rd : 6 3/8 in. 3rd to 4th: 4 9/16 in. 4th to End: 1 7/8 in.. TP12Q15
3 on hand

More Info/Options for Bergstrom Advantage 3 Triple Point Carbides TP12Q15

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $159.50
Now: $95.70
Bergstrom Advantage 3 Triple Point Carbides TP18H06
Manufacturer: Bergstrom
Dennis Kirk Part #: 031871
Bergstrom Advantage 3 Triple Point Carbides: Manufacturer part # TP18H06 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 4 7/8 in. 2nd to End : 4 1/2 in.. TP18H06
2 on hand

More Info/Options for Bergstrom Advantage 3 Triple Point Carbides TP18H06

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $159.50
Now: $95.70
Bergstrom Advantage 3 Triple Point Carbides TP18Q15
Manufacturer: Bergstrom
Dennis Kirk Part #: 031874
Bergstrom Advantage 3 Triple Point Carbides: Manufacturer part # TP18Q15 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 19 1/2 in. x 1/2 in. Stud Diameter x Length: 5/16 in. x (2) 1 1/2 in., (2) 2 in. Number of Studs: 4 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 in. 1st to 2nd : 4 7/8 in. 2nd to 3rd : 6 5/16 in. 3rd to 4th: 4 5/8 in. 4th to End: 1 3/4 in.. TP18Q15
4 on hand

More Info/Options for Bergstrom Advantage 3 Triple Point Carbides TP18Q15

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $199.50
Now: $119.70
Bergstrom Advantage 3 Triple Point Carbides TP24H06
Manufacturer: Bergstrom
Dennis Kirk Part #: 031880
Bergstrom Advantage 3 Triple Point Carbides: Manufacturer part # TP24H06 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rod?s contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 14 1/2 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x 2 in. Number of Studs: 2 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 7 7/8 in. 2nd to 3rd : 4 1/2 in.. TP24H06
2 on hand

More Info/Options for Bergstrom Advantage 3 Triple Point Carbides TP24H06

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $199.50
Now: $119.70
Bergstrom Advantage 3 Triple Point Carbides TP24Q15
Manufacturer: Bergstrom
Dennis Kirk Part #: 031883
Bergstrom Advantage 3 Triple Point Carbides: Manufacturer part # TP24Q15 - Most dramatic turning carbide in the history of snowmobiling. This outperform and outwears all other carbides; eliminates darting. The only design that actually benefits from the 10 degree tilt of the skies when cornering. Center carbide bears load when going straight; outside edges make contact when turning. Center carbide wears down to the same height as the two outside edges, generating 90 degree edges. Outside carbides with maintain an edge all the way down to the host bar, allowing you to turn on ice or pavement much longer; in effect they are self sharpening. Super-hard inserts are bonded to the host rod at critical pressure points to provide, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rod?s contact area gives you long-lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. ***DIMENSIONS Length x Diameter: 19 3/4 in. x 7/16 in. Stud Diameter x Length: 5/16 in. x (2) 2 in.. (2) 1 1/2 in. Number of Studs: 4 ***STUD CENTER MOUNTING DISTANCE FROM: Front to 1st: 2 1/8 in. 1st to 2nd : 4 7/8 in. 2nd to 3rd : 6 3/8 in. 3rd to 4th : 4 9/16 in. 4th to End: 1 7/8 in.. TP24Q15
3 on hand

More Info/Options for Bergstrom Advantage 3 Triple Point Carbides TP24Q15

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod SIC-B01
Manufacturer: Bergstrom
Dennis Kirk Part #: 031961
Bergstrom Hard-Surfaced Wear Rod: Manufacturer part # SIC-B01 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. All wear rods include fastening nuts NOTE: These wear rods are sold each-order two per snowmobile. Fits Dennis Kirk skis (part number 1012), , DIMENSIONS: Length x Diameter: 33" x 7/16" Stud Diameter x Length: 5/16" x 3/4" Number of Studs: 2 Stud Center Mounting Distance From: Front to 1st: 16-1/8" 1st to 2nd: 15" 2nd to End: 2". SIC-B01
More than 10 on hand

More Info/Options for Bergstrom Hard-Surfaced Wear Rod SIC-B01

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod/18" 4-Stud SIC-Q14
Manufacturer: Bergstrom
Dennis Kirk Part #: 031984
Bergstrom Hard-Surfaced Wear Rod/18" 4-Stud: Manufacturer part # SIC-Q14 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. All wear rods include fastening nuts NOTE: These wear rods are sold each-order two per snowmobile. >, , DIMENSIONS: Length x Diameter: 18" x 7/16" Stud Diameter x Length: 5/16" x 3/4"Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 7/8" 1st to 2nd: 3-3/4" 2nd to 3rd: 7" 3rd to 4th: 2-7/8" 4th to End: 3-1/4". SIC-Q14
More than 10 on hand

More Info/Options for Bergstrom Hard-Surfaced Wear Rod/18" 4-Stud SIC-Q14

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod/19.5" 4-Stud SIC-B11
Manufacturer: Bergstrom
Dennis Kirk Part #: 031966
Bergstrom Hard-Surfaced Wear Rod/19.5" 4-Stud: Manufacturer part # SIC-B11 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. All wear rods include fastening nuts NOTE: These wear rods are sold each-order two per snowmobile. , , DIMENSIONS: Length x Diameter: 19-1/2" x 7/16" Stud Diameter x Length: Two End Studs: 5/16" x 1-1/2" Two Center Studs: 5/16" x 2" Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 2" 1st to 2nd: 4-1/2" 2nd to 3rd: 7" 3rd to 4th: 4-1/2" 4th to End: 2". SIC-B11
More than 10 on hand

More Info/Options for Bergstrom Hard-Surfaced Wear Rod/19.5" 4-Stud SIC-B11

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod/19.5" 3-Stud SICQ08
Manufacturer: Bergstrom
Dennis Kirk Part #: 031724
Bergstrom Hard-Surfaced Wear Rod/19.5" 3-Stud: Manufacturer part # SICQ08 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. All wear rods include fastening nuts. , NOTE: , These wear rods are sold each-order two per snowmobile, , DIMENSIONS: Length x Diameter: 19-1/2" x 7/16" Stud Diameter x Length: 5/16" x 3/4" Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 2" 1st to 2nd: 7" 2nd to 3rd: 8-1/4" 3rd to End: 2". SICQ08
3 on hand

More Info/Options for Bergstrom Hard-Surfaced Wear Rod/19.5" 3-Stud SICQ08

Bergstrom - Suspension & Skis

CLOSEOUT!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod/2-Stud H06
Manufacturer: Bergstrom
Dennis Kirk Part #: 031826
Bergstrom Hard-Surfaced Wear Rod/2-Stud: Manufacturer part # H06 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. Hard-surface alloy material produces low drag and easy, consistent handling. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. Mounting bolts instead of studs prevent roll-over in hard turns. All wear rods include fastening nuts. NOTE: These wear rods are sold each. H06
4 on hand

More Info/Options for Bergstrom Hard-Surfaced Wear Rod/2-Stud H06

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod/20" 2-Stud SICK14
Manufacturer: Bergstrom
Dennis Kirk Part #: 031714
Bergstrom Hard-Surfaced Wear Rod/20" 2-Stud: Manufacturer part # SICK14 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. All wear rods include fastening nuts. , NOTE: , These wear rods are sold each-order two per snowmobile>, , DIMENSIONS: Length x Diameter: 20" x 7/16" Stud Diameter x Length: 5/16" x 3/4" Number of Studs: 2 Stud Center Mounting Distance From: Front to 1st: 10" 1st to 2nd: 5-3/4" 2nd to End: 4-1/4" , , For the following models, there is an optional short wear rod Part No. 03-1715 Escapade 1987-88. Safari Escapade 1989. Safari Voyager 1989. Stratos (all) 1987-88. 1 on hand

More Info/Options for Bergstrom Hard-Surfaced Wear Rod/20" 2-Stud SICK14

Bergstrom - Suspension & Skis

CLOSEOUT!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod/20" 3-Stud SICK10
Manufacturer: Bergstrom
Dennis Kirk Part #: 031713
Bergstrom Hard-Surfaced Wear Rod/20" 3-Stud: Manufacturer part # SICK10 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. All wear rods include fastening nuts. , NOTE: , These wear rods are sold each-order two per snowmobile, , DIMENSIONS: Length x Diameter: 20" x 7/16" Stud Diameter x Length: 5/16" x 3/4" Number of Studs: Stud Center Mounting Distance From: Front to 1st: 6" 1st to 2nd: 7" 2nd to 3rd: 5-1/2" 3rd to End: 1-1/2. SICK10
9 on hand

More Info/Options for Bergstrom Hard-Surfaced Wear Rod/20" 3-Stud SICK10

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod/28.5" 3-Stud SICB02
Manufacturer: Bergstrom
Dennis Kirk Part #: 031708
Bergstrom Hard-Surfaced Wear Rod/28.5" 3-Stud: Manufacturer part # SICB02 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. All wear rods include fastening nuts. , NOTE: , These wear rods are sold each-order two per snowmobile, , DIMENSIONS: Length x Diameter: 28-1/2" x 1/2" Stud Diameter x Length: 1/4" x 3/4" Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 11-1/2" 1st to 2nd: 7-1/4" 2nd to 3rd: 8-1/2" 3rd to End: 1-1/2". SICB02
More than 10 on hand

More Info/Options for Bergstrom Hard-Surfaced Wear Rod/28.5" 3-Stud SICB02

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod/29.25" 2-Stud SICQ02
Manufacturer: Bergstrom
Dennis Kirk Part #: 031721
Bergstrom Hard-Surfaced Wear Rod/29.25" 2-Stud: Manufacturer part # SICQ02 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. All wear rods include fastening nuts. , NOTE: , These wear rods are sold each-order two per snowmobile, , DIMENSIONS: Length x Diameter: 29-1/4" x 1/2" Stud Diameter x Length: 5/16" x 3/4" Number of Studs: 2 Stud Center Mounting Distance From: Front to 1st: 14" 1st to 2nd: 13-3/4" 2nd to End: 1-1/2". SICQ02
More than 10 on hand

More Info/Options for Bergstrom Hard-Surfaced Wear Rod/29.25" 2-Stud SICQ02

Bergstrom - Suspension & Skis

CLEARANCE!
Was: $10.99
Now: $8.24
Bergstrom Hard-Surfaced Wear Rod/32.75" 3-Stud SICQ05
Manufacturer: Bergstrom
Dennis Kirk Part #: 031723
Bergstrom Hard-Surfaced Wear Rod/32.75" 3-Stud: Manufacturer part # SICQ05 - Improves steering control on all surfaces. 7/16 in. host bar outwears 6-10 pairs of standard wear rods. As ridge wears, it gradually develops a flat surface with two side edges that improved handling throughout the life of the rod. All wear rods include fastening nuts . DIMENSIONS . , Length X Diameter.........32 3/4 X 7/16". , Stud Diameter X Length..............5/16" X 3/4". , Number of Studs............3. STUD CENTER MOUNTING DISTANCE FROM: . , Front to 1ST....3 1/8". , 1ST to 2ND....13 3/4. , 2ND to 3RD....14 3/4". , 3RD to End....1 1/8". , NOTE: , These wear rods are sold each-order two per snowmobile. SICQ05