|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$4372.99
Barnett Scorpion 8mm, 3 in. Belt Drive W/ Outside Bearing Support 02649
Dennis Kirk Part #: 02649
Barnett Scorpion 8mm, 3 in. Belt Drive W/ Outside Bearing Support 02649: Manufacturer part # 38590 - CNC-machined from 6061 T-6 billet aluminum with a polished finish, designed for appearance and function. 3 in. belt drives feature Barnetts Scorpion lock-up clutch assembly that provides a 100 percent increase in clutch capacity for the ultimate street or strip performance. Design provides a lighter clutch lever pull -- lighter coil springs are allowed by using adjustable pressure arms that progressively increase clutch spring pressure as rpms increase. NOTE: This item ships 3-4 business days after order is processed INCLUDED ITEMS: One outer belt drive cover. Eight stand off for outer cover. Two 5/16 in.-18 x 1 SHCS stand off to motor plate. Three 5/16 in.-18 x 1 1/2 in. SHCS stand off to motor plate. Three 5/16 in.-18 x 1 FHCS stand off to motor plate. Eight 5/16 in.-18 x 1 chrome SHCS outer belt cover to stand offs. Three 5/16 in.-18 x 1 1/2 in. chrome SHCS motor plate to motor. One 5/16 in.-18 x 1 1/2 in. SHCS motor plate to motor. Four 5/16 in.-18 x 2 1/2 in. SHCS motor plate to trans. One clutch shell male octogon drive. Six 1/4 in.-20 x 1 1/2 in. chrome specal machined FHCS. One rear outer bearing support housing. Six 1/4 in.-20 x 1 in. chrome special machined FHCS. One rear octagon female bearing adapter-stainless. One snap ring. One bearing rear support. One 3 in. goodyear barnett belt. One front bearing plug male octagon-polished. Four 1/4 in.-20 x 5/8 in. SHCS chromed. One stainless belt retaining ring-polished. One front pully ocver-polished. One bearing front pulley cover. One snap ring front pulley cover. Six 1/4 in.-20 x 1 in. chrome special machined FHCS. One front octagon female bearing insert-stainless. One front pulley. One splined adapter off set. Five 5/16 in.-18 x 3/4 in. SHCS adapter to pulley with .00 off set. One front pulley nut. One rear pulley. One bearing. One starter ring gear. Six 1/4 in.-20 x 1 1/4 in. FHCS speical machined. One bendix cover-polished. Three 1/4 in.-20 x 5/8 in. SHCS chromed. One starter shaft. One long bolt. One stainless adapter. One lock washer. One 1/4 in.-20 x 3 1/2 in. SHCS. One 1/4 in. lock washer. One motor plate softail. One bearing rear trans main shaft. One instruction sheet.. 38590
1 on Hand
More Info/Options for Barnett Scorpion 8mm, 3 in. Belt Drive W/ Outside Bearing Support 02649
|
|
|
|
$1137.99
Barnett Scorpion Billet Primary Cover 149400
Dennis Kirk Part #: 149400
Barnett Scorpion Billet Primary Cover 149400: Manufacturer part # 38670C - Designed for use with the Scorpion lock-up clutch assembly; Part No. 38-2887. Derby cover is repositioned and oversized to make clutch plate removal/installation and lock-up turning easy by simply removing the derby cover. CNC-machined from 6061 T-6 billet aluminum and chrome-plated for a show-quality appearance. , , NOTE: This item ships 3-4 business days after order is placed. 38670C
1 on Hand
More Info/Options for Barnett Scorpion Billet Primary Cover 149400
|
|
|
|
|
|
$522.99
Barnett Scorpion Hydraulic Billet Clutch 382981
Dennis Kirk Part #: 382981
Barnett Scorpion Hydraulic Billet Clutch 382981: Manufacturer part # 38523 - Twice the friction area of your stock clutch with positive engagement and release. CNC-machined from billet aluminum. Designed to use six heavy-duty coil springs instead of a diaphragm spring to handle increased horsepower. Friction plates are compatible with any primary oil. No machining necessary for installation; bolt it on using the original clutch shell. Kits include clutch hub, drive plates, driven plates, two sets of clutch springs, pressure plate and necessary hardware; sets of replacement drive and driven plates available separately- 382770. For models listed with Hydraulic clutch. , , NOTE: This item ships 3-4 business days after order is placed. 38523
1 on Hand
More Info/Options for Barnett Scorpion Hydraulic Billet Clutch 382981
|
|
|
|
$815.99
Barnett Scorpion Lock-Up Clutch 382887
Dennis Kirk Part #: 382887
Barnett Scorpion Lock-Up Clutch 382887: Manufacturer part # 38422 - 100% increase in clutch capacity. Billet aluminum pressure plate. Steel inner hub. For stock to high-performance motors. Coil spring sets provide maximum tuning capability. Adjustable pressure arms increase spring pressure as rpm's increase. Lighter lever pull. Can be run wet or dry. Smooth, precise shifting. Designed to fit in stock-type basket with open primary or Barnett's Scorpion primary cover. , , NOTE: This item ships 3-4 business days after order is placed. 38422
1 on Hand
More Info/Options for Barnett Scorpion Lock-Up Clutch 382887
|
|
|
|
$815.99
Barnett Scorpion Lock-Up Clutch 382888
Dennis Kirk Part #: 382888
Barnett Scorpion Lock-Up Clutch 382888: Manufacturer part # 38222 - 100% increase in clutch capacity. Billet aluminum pressure plate. Steel inner hub. For stock to high-performance motors. Coil spring sets provide maximum tuning capability. Adjustable pressure arms increase spring pressure as rpm's increase. Lighter lever pull. Can be run wet or dry. Smooth, precise shifting. Designed to fit in stock-type basket with open primary or Barnett's Scorpion primary cover. , , NOTE: This item ships 3-4 business days after order is placed. 38222
1 on Hand
More Info/Options for Barnett Scorpion Lock-Up Clutch 382888
|
|
|
|
$815.99
Barnett Scorpion Lock-Up clutch 382980
Dennis Kirk Part #: 382980
Barnett Scorpion Lock-Up clutch 382980: Manufacturer part # 38522 - 100 percent increase in clutch capacity. Billet aluminum pressure plate. Steel inner hub. For stock to high-performance motors. Coil spring sets provide maximum tuning capability. Adjustable pressure arms increase spring pressure as rpms increase. Lighter lever pull. Can be run wet or dry. Smooth, precise shifting. Designed to fit in stock-type basket. For use with open primary or Barnett Scorpion primary cover. , , NOTE: This item ships 3-4 business days after order is placed. 38522
1 on Hand
More Info/Options for Barnett Scorpion Lock-Up clutch 382980
|
|
|
|
$325.99
Barnett Scorpion Lock-Up Pressure Plate 382983
Dennis Kirk Part #: 382983
Barnett Scorpion Lock-Up Pressure Plate 382983: Manufacturer part # 38221 - Use with your Scorpion clutch to gain the benefits of the Scorpion lock-up clutch. Machined from 2024 T-3 billet aluminum. Increase the performance of your clutch capacity on stock to high-performance motors by 100 percent. Maximum tunability from coil spring sets. Gives smooth, precise shifts and lighter pull at the lever. For use in stock or stock-style clutch basket with open primary. , , NOTE: This item ships 3-4 business days after order is placed. 38221
1 on Hand
More Info/Options for Barnett Scorpion Lock-Up Pressure Plate 382983
|
|
|
|
$325.99
Barnett Scorpion Lock-Up Pressure Plate 382984
Dennis Kirk Part #: 382984
Barnett Scorpion Lock-Up Pressure Plate 382984: Manufacturer part # 38421 - Use with your Scorpion clutch to gain the benefits of the Scorpion lock-up clutch. Machined from 2024 T-3 billet aluminum. Increase the performance of your clutch capacity on stock to high-performance motors by 100 percent. Maximum tunability from coil spring sets. Gives smooth, precise shifts and lighter pull at the lever. For use in stock or stock-style clutch basket with open primary or Barnetts Scorpion primary cover. , , NOTE: This item ships 3-4 business days after order is placed. 38421
1 on Hand
More Info/Options for Barnett Scorpion Lock-Up Pressure Plate 382984
|
|
|
|
$325.99
Barnett Scorpion Lock-Up Pressure Plate 382985
Dennis Kirk Part #: 382985
Barnett Scorpion Lock-Up Pressure Plate 382985: Manufacturer part # 38521 - Use with your Scorpion clutch to gain the benefits of the Scorpion lock-up clutch. Machined from 2024 T-3 billet aluminum. Increase the performance of your clutch capacity on stock to high-performance motors by 100 percent. Maximum tunability from coil spring sets. Gives smooth, precise shifts and lighter pull at the lever. For use in stock or stock-style clutch basket with open primary or Barnetts Scorpion primary cover. , , NOTE: This item ships 3-4 business days after order is placed. 38521
1 on Hand
More Info/Options for Barnett Scorpion Lock-Up Pressure Plate 382985
|
|
|
|
|
|
$23.99
H380302 Barnett Standard Duty Spring Set
Dennis Kirk Part #: H380302
H380302 Barnett Standard Duty Spring Set: Manufacturer part # MT68 - Standard-duty springs ensure smooth and positive clutch operation on Big Twin models 41-06. A set of 10 heavy-duty springs is designed for all Big Twin models 68-E84 that need extra spring tension H380304. Heavy-duty springs for Big Twin 90-06 and XL 84-03 are approximately 20% stronger than OEM and recommended for competition use. Heavy Duty For:, 68-E84 use H380304, L84-89 use H380300, 90-97 Big Twin and XL 91-03 use H380404, 84-90 XL use H380351, 98-06 Big Twin/Twin Cam use H380308. MT68
3 on Hand
More Info/Options for H380302 Barnett Standard Duty Spring Set
|
|
|
|
$23.99
H380303 Barnett Standard Duty Spring Set
Dennis Kirk Part #: H380303
H380303 Barnett Standard Duty Spring Set: Manufacturer part # MT41 - Standard-duty springs ensure smooth and positive clutch operation on Big Twin models 41-06. A set of 10 heavy-duty springs is designed for all Big Twin models 68-E84 that need extra spring tension. Heavy-duty springs for Big Twin 90-06 and XL 84-03 are approximately 20% stronger than OEM and recommended for competition use. For Heavy Duty:, 68-E84 use H38-0304, L84-89 use H38-0300, 90-97 Big Twin and 91-03 XL use H38-0404, 84-90 XL use H38-0351, 98-06 Big Twin/Twin Cam use H38-0308. MT41
1 on Hand
More Info/Options for H380303 Barnett Standard Duty Spring Set
|
|
