$359.99Joe Rocket Kawasaki ZX Leather Jacket 821-2006
Manufacturer: Joe Rocket
Dennis Kirk Part #: 3548759XXL
Joe Rocket Kawasaki ZX Leather Jacket: Manufacturer part # 821-2006 - 1.2mm Dull Finish Cowhide. C.E. rated protectors in shoulders and elbows. Removable spine pad with pocket for optional C.E. spine protector. Variable Flow ventilation system. Removable insulated vest liner. Sure Fit adjustable waistband. Snap loops for attaching jacket to belt. Reflective stripe. Official licensed Kawasaki product.. 821-2006 1 on hand
$161.99Leo Vince ZX Hand-Made Scooter Exhaust 4077
Manufacturer: Leo Vince
Dennis Kirk Part #: 4401892
Leo Vince ZX Hand-Made Scooter Exhaust: Manufacturer part # 4077 - Open, double-expansion chamber design is 10/10mm stainless steel. Noise levels are kept acceptable with internal spaces covered with a sound-deadening material. Natural machined finish with a protective varnish coating or chrome finish on expansion chamber. Glossy carbon-fiber finish muffler sleeve. Include all necessary hardware for installation. E-approved, meet all European Standards requirements for road use. , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4077 1 on hand
$189.99Leo Vince ZX Hand-Made Scooter Exhaust 4077C
Manufacturer: Leo Vince
Dennis Kirk Part #: 4401893
Leo Vince ZX Hand-Made Scooter Exhaust: Manufacturer part # 4077C - Open, double-expansion chamber design is 10/10mm stainless steel. Noise levels are kept acceptable with internal spaces covered with a sound-deadening material. Natural machined finish with a protective varnish coating or chrome finish on expansion chamber. Glossy carbon-fiber finish muffler sleeve. Include all necessary hardware for installation. E-approved, meet all European Standards requirements for road use. , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing. 4077C 1 on hand
$37.99Motorbooks International Motocourse 2005-2006 140647AE
Manufacturer: Motorbooks International
Dennis Kirk Part #: 361784
Motorbooks International Motocourse 2005-2006 : Manufacturer part # 140647AE - Here's the 30th anniversary edition of the world's leading Grand Prix and Superbike annual, with extensive coverage of the World Superbike Championship, race-by-race Grand Prix reports and stunning photography by today's top photographers. Also includes technical reviews and personality profiles, as well as full national and international results. Measures 12 1/3" x 9". Hardcover; 288 pages.. 140647AE 2 on hand
$224.99Jardine Steel Quick-Detach Backrest Mounting Kit 34-2006-01
Manufacturer: Jardine
Dennis Kirk Part #: 494533
Jardine Steel Quick-Detach Backrest Mounting Kit: Manufacturer part # 34-2006-01 - Steel mounting kits are available in fixed or quick-detach versions. Order one backrest and one mounting kit.. 34-2006-01 1 on hand
$124.99Jardine Steel Fixed Backrest Mounting Kit 33-2006-01
Manufacturer: Jardine
Dennis Kirk Part #: 494403
Jardine Steel Fixed Backrest Mounting Kit: Manufacturer part # 33-2006-01 - Steel mounting kits are available in fixed or quick-detach versions. Order one backrest and one mounting kit. , , Included Items: , (1) Backrest mounting bracket, right, (1) Backrest mounting bracket, left, (2) Front mounting spacer (tall), (2) Rear mounting spacer (short), (4) M8-1.25 x 45mm Socket button head bolt. 33-2006-01 1 on hand
$189.99Leo Vince ZX Hand-Made Scooter Exhaust 5582C
Manufacturer: Leo Vince
Dennis Kirk Part #: 4401895
Leo Vince ZX Hand-Made Scooter Exhaust: Manufacturer part # 5582C - Open, double-expansion chamber design is 10/10mm stainless steel. Noise levels are kept acceptable with internal spaces covered with a sound-deadening material. Natural machined finish with a protective varnish coating or chrome finish on expansion chamber. Glossy carbon-fiber finish muffler sleeve. Include all necessary hardware for installation. E-approved, meet all European Standards requirements for road use. , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective manufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 5582C 1 on hand
CLOSEOUT!
Was: $293.99
Now: $220.49
Jardine RT-One Polished Aluminum Slip-On 18-2006-122-02
Manufacturer: Jardine
Dennis Kirk Part #: 448812
Jardine RT-One Polished Aluminum Slip-On: Manufacturer part # 18-2006-122-02 - RT-One are the pinnacle of Jardines exhaust lineup. Engineered to improve sound, looks and performance. Dyno-tested to ensure maximum power with smooth delivery. Designed with experience gained as exhaust supplier to American Honda's road race team. Comes with stainless steel mid pipes. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 18-2006-122-02 1 on hand
$160.99Leo Vince ZX Hand-Made Scooter Exhaust 4579
Manufacturer: Leo Vince
Dennis Kirk Part #: 4403053
Leo Vince ZX Hand-Made Scooter Exhaust: Manufacturer part # 4579 - Open, double-expansion chamber design is 10/10mm stainless steel. Noise levels are kept acceptable with internal spaces covered with a sound-deadening material. Natural machined finish with a protective varnish coating or chrome finish on expansion chamber. Glossy carbon-fiber finish muffler sleeve. Include all necessary hardware for installation. E-approved, meet all European Standards requirements for road use. , INCLUDED ITEMS:, (1) Exhaust Pipe, (3) Mounting Brackets, (1) Head Gasket, (2) 8mm-1.25 x 25mm Hex Head Bolts, (4) 8mm-1.25 x 35mm Hex Head Bolts, (2) 8mm-1.25 Nuts, (3) Springs, (12) 15mm x 12mm Spacers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturers directly with questions regarding modifications that may need to be made during, or after, installing their product, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by warranty.. 4579 1 on hand
$160.99Leo Vince ZX Hand-Made Scooter Exhaust 4488
Manufacturer: Leo Vince
Dennis Kirk Part #: 4403056
Leo Vince ZX Hand-Made Scooter Exhaust: Manufacturer part # 4488 - Open, double-expansion chamber design is 10/10mm stainless steel. Noise levels are kept acceptable with internal spaces covered with a sound-deadening material. Natural machined finish with a protective varnish coating or chrome finish on expansion chamber. Glossy carbon-fiber finish muffler sleeve. Include all necessary hardware for installation. E-approved, meet all European Standards requirements for road use. , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturers directly with questions regarding modifications that may need to be made during, or after, installing their product, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by warranty.. 4488 1 on hand
$160.99Leo Vince ZX Hand-Made Scooter Exhaust 4564C
Manufacturer: Leo Vince
Dennis Kirk Part #: 4403058
Leo Vince ZX Hand-Made Scooter Exhaust: Manufacturer part # 4564C - Open, double-expansion chamber design is 10/10mm stainless steel. Noise levels are kept acceptable with internal spaces covered with a sound-deadening material. Natural machined finish with a protective varnish coating or chrome finish on expansion chamber. Glossy carbon-fiber finish muffler sleeve. Include all necessary hardware for installation. E-approved, meet all European Standards requirements for road use. , INCLUDED ITEMS:, (1) Exhaust Pipe, (3) Mounting Brackets, (1) Head Gasket, (4) 8mm-1.25 x 35mm Hex head Bolts, (2) 8mm-1.25mm Nuts, (2) 8mm x 1.00mm Spacers, (3) 6mm-1.00 x 19mm Hex Head Bolts, (12) 15mm x 12mm Spacers, (3) 6mm-1.00 Nuts, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturers directly with questions regarding modifications that may need to be made during, or after, installing their product, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by warranty.. 4564C 1 on hand
$161.99Leo Vince ZX Hand-Made Scooter Exhaust 5582
Manufacturer: Leo Vince
Dennis Kirk Part #: 4401894
Leo Vince ZX Hand-Made Scooter Exhaust: Manufacturer part # 5582 - Open, double-expansion chamber design is 10/10mm stainless steel. Noise levels are kept acceptable with internal spaces covered with a sound-deadening material. Natural machined finish with a protective varnish coating or chrome finish on expansion chamber. Glossy carbon-fiber finish muffler sleeve. Include all necessary hardware for installation. E-approved, meet all European Standards requirements for road use. , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective manufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 5582 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
