Yamaha Rhino Snow Plow

$269.95 Moose Light Bar for Yamaha Rhino 1420
Manufacturer: Moose
Dennis Kirk Part #: 515629
Moose Light Bar for Yamaha Rhino: Manufacturer part # 1420 - Add function and great looks to your Rhino with this durable, foam-filled light bar. Features stainless steel mounting plates and cover. Accommodates a wide range of lamps. Mounts with or without the Slimline or sunshade roof. Lights are sold separately. Shown mounted on Slimline roof. INCLUDED ITEMS: One light bar. Four stainless steel light mounting plates. Four Adhesive back closed cell sponge gaskets. Eight 1/4 in.-20 x 1.25 in. large stainless steel button head bolts. Eight 1/4 in. stainless steel flat washers. Eight 1/4 in. stainless steel lock washers. Eight 1/4 in.-20 stainless steel nylock nuts. Four 5/16 in.-18 x 2.00 in. long stainless steel hex head bolts. Four 5/16 in.-18 x 3.50 in. long stainless stee hex head bolts. Four 1 in. outside diameter stainless steel fender washers. Four 5/16 in. stainless steel flat washers. Four 5/16 in. stainless steel lock washers. Four 5/16 in.-18 stainless steel nylock nuts. Four mounting brackets. One 1/2 in. black grommet. One instruction sheet.. 1420
1 on hand

More Info/Options for Moose Light Bar for Yamaha Rhino 1420

Yamaha Rhino Snow Plow

$264.95 Moose Rapid Mount Plow Frame p516350
Manufacturer: Moose
Dennis Kirk Part #: 516350
Moose Rapid Mount Plow Frame : Manufacturer part # p516350 - Moose plow system?s third generation. Uses a compact front mount design that provides over 20 in. of lift height. After the original 30 minutes installation, you can mount or un-mount within seconds. Only works with a winch lift. Fits all Moose plow blades. Comes in black powder-coated paint. , , WHAT TO ORDER: Moose Plow Blade: Your choice Rapid Mount Plate: To be searched by make, model, and year Winch Mount: To be searched by make, model, and year INCLUDED ITEMS:. (1) Frame (2) Latches (1) 16mm I.D. x 30mm O.D. x 3mm Flat Washers (1) 1/16 in. D x 14-3/4 in. Cable (1) Pivot (1) Locking arm bracket (1) Locking pin (1) Locking arm (1) Support plate (1) Pull bar (1) Pull bar extension (1) Locking arm spring (1) M4-0.70 x 30mm Hex bolt (1) M8-1.25 x 40mm Hex bolt (1) M16-1.5 Nylock nut (2) M8-1.25 x 100mm Eyebolts (2) M10-25mm Hex bolts (2) M4-0.70 x 25mm Hex bolts (2) M6-1.0 x 25mm Hex bolts (10) M8-1.25 x 20mm Hex bolts (2) M8-1.25 x 65mm Hex bolts (2) 5/16 in. Nylock nuts (2) M10-1.5 Nylock nuts (3) M4-0.70 Nylock nuts (4) M6-1.0 Nylock nuts (15) M8-1.25 Nylock nuts (2) 3/8 in. D x 3/4 in. Flange screws (2) Exhaust springs (2) Arm links (2) Adjustable blade stops (2) 1 in. D x 13.5 in. x 43 lbs Tension springs (1) Instruction sheet. p516350
Expected Soon

More Info/Options for Moose Rapid Mount Plow Frame p516350

Yamaha Rhino Snow Plow

$58.95 Moose Side Shield for Cycle Country Plows p512375
Manufacturer: Moose
Dennis Kirk Part #: 512375
Moose Side Shield for Cycle Country Plows: Manufacturer part # p512375 - Greatly reduces the amount of overflowing snow or dirt when used on the forward end of an angled Moose Cycle Country plow blade. A side shield on both ends of a straight blade contains even more plowed material. Easy to install, constructed from sturdy, 11-gauge steel. Measures 14-1/2 in. H x 8 in. W. Requires some drilling for installation. INCLUDED ITEMS: . (1) Instruction sheet. p512375
4 on hand

More Info/Options for Moose Side Shield for Cycle Country Plows p512375

Yamaha Rhino Snow Plow

$38.95 Moose Plow Light Mount Kit 2569
Manufacturer: Moose
Dennis Kirk Part #: 211922
Moose Plow Light Mount Kit: Manufacturer part # 2569 - Light your way when plowing at night or in the early morning. Attach mount to the front rack of your ATV; use Moose halogen light kit Part No. 21-996 (sold separately). Designed for long-lasting durability with a 1/4 in. steel base and 7-gauge steel light support arms. NOTE: This does not include two 1/4 in. Hex head bolts to attach the plow light kit. 2569
9 on hand

More Info/Options for Moose Plow Light Mount Kit 2569

Yamaha Rhino Snow Plow

$28.95 Moose Plow Blade Spring Kit p514349
Manufacturer: Moose
Dennis Kirk Part #: 514349
Moose Plow Blade Spring Kit: Manufacturer part # p514349 - Replacement part for Moose Plows This comes with a pair of Springs and eyebolts, For blade stop kit (Two Flat Plates with a Hole, Two Bolts and Two Nuts) order Part No. 51-4350. p514349
10 on hand

More Info/Options for Moose Plow Blade Spring Kit p514349

Yamaha Rhino Snow Plow

$22.95 Moose Plow Markers p512522
Manufacturer: Moose
Dennis Kirk Part #: 512522
Moose Plow Markers: Manufacturer part # p512522 - Clearly marks plow edges for increased visibility and safety. Hard rubber construction for durability. Sold in pairs. INSTRUCTION:. 1. Center punch a mark on each side of the plow blade 1 in. in from the side, and 1 in. in from the front of the blade 2. Using a 5/16 in. bit, drill the holes in the blade for the markers 3. Install the plow markers and hardware per illustration, adjust the markers to the desired position and tighten securely 4. If a plow flap has been installed, then use the outside plow flap mounting holes, drill to size and install the plow. INCLUDED ITEMS:. , (2) plow markers, (2) mounting brackets, (2) 5/16 in. x 3/4 in. hex bolts, (2) 5/16 in. x 1 in. hex bolts, (2) 5/16 in. Lock washers, (2) 5/16 in. Nyloc nuts, (4) 5/16 in. Flat washers. p512522
More than 10 on hand

More Info/Options for Moose Plow Markers p512522

Yamaha Rhino Snow Plow

$58.95 Side Shield for Moose Utility Plows p512374
Manufacturer: Moose
Dennis Kirk Part #: 512374
Side Shield for Moose Utility Plows: Manufacturer part # p512374 - Greatly reduces the amount of overflowing snow or dirt when used on the forward end of an angled Moose Utility plow blade. A side shield on both ends of a straight blade contains even more plowed material. Easy to install, constructed from sturdy, 11-gauge steel. Measures 14-1/2 in. H x 8 in. W. Requires some drilling for installation. NOTE: Available in black only INCLUDED ITEMS:. (1) Shield 1/4 in. thick (2) 3/8 in. x 1 in. Hex head bolts (2) 3/8 in. Flat washers (1) Instruction sheet. p512374
5 on hand

More Info/Options for Side Shield for Moose Utility Plows p512374

Yamaha Rhino Snow Plow

$4.95 Moose Plow Blade Pivot Bolt p514347
Manufacturer: Moose
Dennis Kirk Part #: 514347
Moose Plow Blade Pivot Bolt: Manufacturer part # p514347 - Replacement part for Moose Plows. p514347
More than 10 on hand

More Info/Options for Moose Plow Blade Pivot Bolt p514347

Yamaha Rhino Snow Plow

$37.95 Moose Hardened Plow Blade Skid p513206
Manufacturer: Moose
Dennis Kirk Part #: 513206
Moose Hardened Plow Blade Skid: Manufacturer part # p513206 - Control working level of your blade. Extra-duty abrasive-resistant steel works longer than standard skid. This is not a Conversion Kit. NOTE: This is the new style. No mounting hardware or instructions included.. p513206
More than 10 on hand

More Info/Options for Moose Hardened Plow Blade Skid p513206

Yamaha Rhino Snow Plow

$11.95 Moose Plow Blade Skid p513144
Manufacturer: Moose
Dennis Kirk Part #: 513144
Moose Plow Blade Skid: Manufacturer part # p513144 - Control working level of your blade. Extra-duty abrasive-resistant steel works longer than standard ski. , , This is the new style blade skid that is held onto the plow blade with a lockpin (Just the skid only).. p513144
More than 10 on hand

More Info/Options for Moose Plow Blade Skid p513144

Yamaha Rhino Snow Plow

$64.95 Moose Plow Hardware Kit p515829
Manufacturer: Moose
Dennis Kirk Part #: 515829
Moose Plow Hardware Kit: Manufacturer part # p515829 - Includes an assortment of nuts, bolts and U-bolts for Moose plow systems. INCLUDED ITEMS: . Miller pins 1/2 in. x 3/4 in. Shoulder bolts 1/2 in. Washers 3/8 in. Nylock nuts 3/8 in. x 3/4 in. Shoulder bolts 5/16 in. x 1-1/4 in. x 2-1/4 in. rd. U-bolts 5/16 in. x 1-1/8 in. x 2-1/4 in. sq. U-bolts Blade stop kit 3/16 in. x 1-1/4 in. Skid lynch pins Rubber washers Blade position pin springs 5/16 in. Washers 5/16 in. Nylock nuts 5/16 in. x 1-1/4 in. x 2-3/4 in. rd. U-bolts. p515829
1 on hand

More Info/Options for Moose Plow Hardware Kit p515829

Yamaha Rhino Snow Plow

$142.95 Moose Rapid Mount Plow Mount Plate p516353
Manufacturer: Moose
Dennis Kirk Part #: 516353
Moose Rapid Mount Plow Mount Plate: Manufacturer part # p516353 - Moose plow system's third generation. Uses a compact front mount design that provides over 20 in. of lift height. After the original 30 minutes installation, you can mount or unmount within seconds. Only works with a winch lift. Fits all Moose plow blades. Comes in black powder-coated paint. , , WHAT TO ORDER: . Rapid Mount Plow Frame: Part No. 51-6350 Plow Blade: Your choice Note: Winch mount included , , INCLUDED ITEMS:. , (2) M10 Flat Washers, (4) M10 x 25mm Hex Bolts, (2) M8 x 25mm Hex Bolts, (4) M8 x 50mm Hex Bolts, (2) M8 x 60mm Hex Bolts, (2) M10 Nylock Nuts, (10) M8 Nylock Nuts, (4) M10 Thin Nuts, (1) Mount Plate, (1) Mounting Bracket, (1) Mounting Bracket Support, (1) Winch Bracket, (4) U-Brackets. p516353
3 on hand

More Info/Options for Moose Rapid Mount Plow Mount Plate p516353

Yamaha Rhino Snow Plow

Yamaha Rhino Snow Plow