$14.99Kimpex Tether Switch for Yamaha and 96-98 Arctic Cat ZR models 01-111-14
Manufacturer: Kimpex
Dennis Kirk Part #: 210033
Kimpex Tether Switch for Yamaha and 96-98 Arctic Cat ZR models: Manufacturer part # 01-111-14 - Disconnects ignition instantly when rider is separated from machine. Safety feature required by most racing organizations. Safety stop switch only; no tether included -- use PART NO. 21-214. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL work for your machine. 4. If you DO have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 01-111-14 More than 10 on hand
$19.95Moose T-Stand for Yamaha and Suzuki MS21M00111
Manufacturer: Moose
Dennis Kirk Part #: 282603
Moose T-Stand for Yamaha and Suzuki: Manufacturer part # MS21M00111 - Sized per application, the axle pin of these stands will fit snugly in your rear axle. T-stands don't fall off when you move your bike like triangle stands do. No removable or changeable pieces to fall out or get lost. Made from steel and given a very durable powder coat finish. Heavy duty stand will not fall over when you wash your bike, or stand it on soft ground. Made in the U.S.A.. Dimensions: , Height: 11 3/4 in., Pin Diameter: .578 (37/64 in.) fits 14.5mm hole, Pin Length: 1 3/4 in.. MS21M00111 9 on hand
$9.99Stickerpoint Laser Yamaha Tank 107027
Manufacturer: Stickerpoint
Dennis Kirk Part #: 520089
Stickerpoint Laser Yamaha Tank: Manufacturer part # 107027 - We have got the latest, hottest and most authentic looking logos from Stickerpoint. Pressure-sensitive vinyl logos are pre-spaced and ready for mounting on your machine, trailer, shop -- any place you wish to declare your allegiance. Laser-cut stickers are pre-cut around the outside of each letter/design; non-laser all have a square or rectangular background. As good or better than OEM, these tough vinyl logos are designed to stand up to the rigors of outdoor use. Choose from a wide range of colors, from mild pastels to wild street-scorching fluorescents and reflective types. Stickers sold in pairs or separately as pictured. , NOTE: Sticker Measurement: 8.75 in. X 2 in.. 107027 5 on hand
$12.99N-Style Swingarm Yamaha V2 Decals N30436
Manufacturer: N-Style
Dennis Kirk Part #: 527232
N-Style Swingarm Yamaha V2 Decals: Manufacturer part # N30436 - Give your bike the factory look. Kit includes two stickers, one for each side. NOTE: For proper adhesion, use only soap and water to wash surface where decal/sticker is to be applied. DIMENISIONS: Height: 1.75 in.. Width: 10.5 in... N30436 4 on hand
$12.99Stickerpoint Yamaha Diamond Plate 109782
Manufacturer: Stickerpoint
Dennis Kirk Part #: 521762
Stickerpoint Yamaha Diamond Plate: Manufacturer part # 109782 - We have got the latest, hottest and most authentic looking logos from Stickerpoint. Pressure-sensitive vinyl logos are pre-spaced and ready for mounting on your machine, trailer, shop -- any place you wish to declare your allegiance. Laser-cut stickers are pre-cut around the outside of each letter/design; non-laser all have a square or rectangular background. As good or better than OEM, these tough vinyl logos are designed to stand up to the rigors of outdoor use. Choose from a wide range of colors, from mild pastels to wild street-scorching fluorescents and reflective types. Stickers sold in pairs or separately as pictured. , NOTE: Sticker Measurement: 9 in. X 2 in.. 109782 4 on hand
$12.99Stickerpoint Laser Yamaha Reflex 109815
Manufacturer: Stickerpoint
Dennis Kirk Part #: 520290
Stickerpoint Laser Yamaha Reflex: Manufacturer part # 109815 - We have got the latest, hottest and most authentic looking logos from Stickerpoint. Pressure-sensitive vinyl logos are pre-spaced and ready for mounting on your machine, trailer, shop -- any place you wish to declare your allegiance. Laser-cut stickers are pre-cut around the outside of each letter/design; non-laser all have a square or rectangular background. As good or better than OEM, these tough vinyl logos are designed to stand up to the rigors of outdoor use. Choose from a wide range of colors, from mild pastels to wild street-scorching fluorescents and reflective types. Stickers sold in pairs or separately as pictured. , NOTE: Sticker Measurement: 6.5 in. X 1.5 in.. 109815 Expected Soon
$12.99N-Style Swingarm Yamaha V2 Decals N30437
Manufacturer: N-Style
Dennis Kirk Part #: 527233
N-Style Swingarm Yamaha V2 Decals: Manufacturer part # N30437 - Give your bike the factory look. Kit includes two stickers, one for each side. NOTE: For proper adhesion, use only soap and water to wash surface where decal/sticker is to be applied. DIMENISIONS: Height: 1.75 in.. Width: 10.5 in... N30437 3 on hand
$18.99Stickerpoint Laser Yamaha Outline 111288
Manufacturer: Stickerpoint
Dennis Kirk Part #: 520365
Stickerpoint Laser Yamaha Outline: Manufacturer part # 111288 - We have got the latest, hottest and most authentic looking logos from Stickerpoint. Pressure-sensitive vinyl logos are pre-spaced and ready for mounting on your machine, trailer, shop -- any place you wish to declare your allegiance. Laser-cut stickers are pre-cut around the outside of each letter/design; non-laser all have a square or rectangular background. As good or better than OEM, these tough vinyl logos are designed to stand up to the rigors of outdoor use. Choose from a wide range of colors, from mild pastels to wild street-scorching fluorescents and reflective types. Stickers sold in pairs or separately as pictured. , NOTE: Sticker Measurement: 7 in. X 1.75 in.. 111288 3 on hand
$12.99Stickerpoint Laser Yamaha 109255
Manufacturer: Stickerpoint
Dennis Kirk Part #: 520238
Stickerpoint Laser Yamaha: Manufacturer part # 109255 - We have got the latest, hottest and most authentic looking logos from Stickerpoint. Pressure-sensitive vinyl logos are pre-spaced and ready for mounting on your machine, trailer, shop -- any place you wish to declare your allegiance. Laser-cut stickers are pre-cut around the outside of each letter/design; non-laser all have a square or rectangular background. As good or better than OEM, these tough vinyl logos are designed to stand up to the rigors of outdoor use. Choose from a wide range of colors, from mild pastels to wild street-scorching fluorescents and reflective types. Stickers sold in pairs as pictured. , NOTE: Sticker Measurement: 4 in. X 1 in.. 109255 3 on hand
$18.99Stickerpoint Laser Yamaha Outline 111289
Manufacturer: Stickerpoint
Dennis Kirk Part #: 520366
Stickerpoint Laser Yamaha Outline: Manufacturer part # 111289 - We have got the latest, hottest and most authentic looking logos from Stickerpoint. Pressure-sensitive vinyl logos are pre-spaced and ready for mounting on your machine, trailer, shop -- any place you wish to declare your allegiance. Laser-cut stickers are pre-cut around the outside of each letter/design; non-laser all have a square or rectangular background. As good or better than OEM, these tough vinyl logos are designed to stand up to the rigors of outdoor use. Choose from a wide range of colors, from mild pastels to wild street-scorching fluorescents and reflective types. Stickers sold in pairs or separately as pictured. , NOTE: Sticker Measurement: 7 in. X 1.75 in.. 111289 Expected Soon
$18.99Stickerpoint Laser Yamaha Logo 111268
Manufacturer: Stickerpoint
Dennis Kirk Part #: 520350
Stickerpoint Laser Yamaha Logo: Manufacturer part # 111268 - We have got the latest, hottest and most authentic looking logos from Stickerpoint. Pressure-sensitive vinyl logos are pre-spaced and ready for mounting on your machine, trailer, shop -- any place you wish to declare your allegiance. Laser-cut stickers are pre-cut around the outside of each letter/design; non-laser all have a square or rectangular background. As good or better than OEM, these tough vinyl logos are designed to stand up to the rigors of outdoor use. Choose from a wide range of colors, from mild pastels to wild street-scorching fluorescents and reflective types. Stickers sold in pairs or separately as pictured. , NOTE: Sticker Measurement: 3.5 in. X 3.5 in.. 111268 3 on hand
$11.99Factory Effex Yamaha Fork Shield 06-38206
Manufacturer: Factory Effex
Dennis Kirk Part #: 525831
Factory Effex Yamaha Fork Shield: Manufacturer part # 06-38206 - Clear 15 mil ultracurve vinyl has scratch-proof printing. Extra thick for impact resistance. Will fit with fender on. Sold in pairs. DIMENSIONS: Height: 9.5 in.. Width: 3.5 in... 06-38206 4 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
