$14.99Kimpex Tether Switch for Yamaha and 96-98 Arctic Cat ZR models 01-111-14
Manufacturer: Kimpex
Dennis Kirk Part #: 210033
Kimpex Tether Switch for Yamaha and 96-98 Arctic Cat ZR models: Manufacturer part # 01-111-14 - Disconnects ignition instantly when rider is separated from machine. Safety feature required by most racing organizations. Safety stop switch only; no tether included -- use PART NO. 21-214. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL work for your machine. 4. If you DO have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 01-111-14 More than 10 on hand
$1.99Kimpex Kill Button Cap for Yamaha 01-120-45
Manufacturer: Kimpex
Dennis Kirk Part #: 21216
Kimpex Kill Button Cap for Yamaha: Manufacturer part # 01-120-45 - Original equipment replacement kill button.. 01-120-45 More than 10 on hand
$37.99Factory Effex 01 Yamaha OEM Tank/Shroud Graphic 04-2231
Manufacturer: Factory Effex
Dennis Kirk Part #: 523476
Factory Effex 01 Yamaha OEM Tank/Shroud Graphic: Manufacturer part # 04-2231 - Exactly like the original stock graphics. 12 mil thick ultracurve vinyl with scratch-proof printing. Pre-cut for easy installation. Special gas tank adhesive is used where needed. Graphics are durable enough to withstand the repeated use of pressure washers.. 04-2231 5 on hand
$37.99Factory Effex 01 Yamaha OEM Tank/Shroud Graphic 04-2232
Manufacturer: Factory Effex
Dennis Kirk Part #: 523477
Factory Effex 01 Yamaha OEM Tank/Shroud Graphic: Manufacturer part # 04-2232 - Exactly like the original stock graphics. 12 mil thick ultracurve vinyl with scratch-proof printing. Pre-cut for easy installation. Special gas tank adhesive is used where needed. Graphics are durable enough to withstand the repeated use of pressure washers.. 04-2232 2 on hand
$58.99IRC Road Winner RX-01 Sport Bike Front Tire RX-01 540606
Manufacturer: IRC
Dennis Kirk Part #: 540606
IRC Road Winner RX-01 Sport Bike Front Tire: Manufacturer part # RX-01 - DennisKirk Part # 540606 - H-rated up to 130 mph. Sport bias tire with well-balanced in abrasion resistance and grip. Combined narrow and wide grooves to provide flexible tread surface for superior road holding on wet road traction. Stronger casing for better straight-line stability. Tubeless blackwall. Sidewall ID Information: IRC 110/70-17 M/C 54H ROAD WINNER RX-01F. , Dimensions: , Inflated Width/Measuring Rim Width: 4.30 in./3.00 in., Inflated Diameter: 23.3 in., Acceptable Rim Width: 3.00 in., Deepest Tread Depth: 6/32 in., Balance DOT: No, Directional Arrow: No, Speed Rating: H-Rated up to 130 MPH, , Capacities and Construction: , Load Capacity/Inflation Pressure: 467 lbs./41 PSI, Load Range: B, Bias or Radial Ply: Bias, Tread Plies/Material: 3 Nylon, Sidewall Plies/Material: 2 Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tubeless. RX-01 1 on hand
$63.99IRC Road Winner RX-01 Sport Bike Front Tire RX-01 540607
Manufacturer: IRC
Dennis Kirk Part #: 540607
IRC Road Winner RX-01 Sport Bike Front Tire: Manufacturer part # RX-01 - DennisKirk Part # 540607 - H-rated up to 130 mph. Sport bias tire with well-balanced in abrasion resistance and grip. Combined narrow and wide grooves to provide flexible tread surface for superior road holding on wet road traction. Stronger casing for better straight-line stability. Tubeless blackwall. Sidewall ID Information: IRC 110/80-17 M/C 57H ROAD WINNER RX-01. , Dimensions: , Inflated Width/Measuring Rim Width: 4.30 in./2.50 in., Inflated Diameter: 24.2 in., Acceptable Rim Width: 2.50 in., Deepest Tread Depth: 7/32 in., Balance DOT: Yes-Yellow, Directional Arrow: Yes, Speed Rating: H-Rated up to 130 MPH, , Capacities and Construction: , Load Capacity/Inflation Pressure: 507 lbs./41 PSI, Load Range: B, Bias or Radial Ply: Bias, Tread Plies/Material: 3 Nylon, Sidewall Plies/Material: 2 Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tubeless. RX-01 2 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
