Xt 600

CLEARANCE!
Was: $116.99
Now: $70.19
HJC CL-X5 Helmet 780-600
Manufacturer: HJC
Dennis Kirk Part #: 3301475XXS
HJC CL-X5 Helmet: Manufacturer part # 780-600 - Injection-Molded Polycarbonate Composite Shell Construction exceeding Snell M2005 and DOT standards. The lightweight injection molded polycarbonate composite shell is the latest advancement in polycarbonate composite technology. I-beam chin bar design. Four shell sizes provide a comfortable fit. Flow-Through ACS (Advanced Channeling Ventilation System). Dual flow-through channels. 2 high capacity forehead intake vents. Venturi exhaust spoiler. Removable / washable Bioceramic Nylex Interior. Anti-bacterial Bioceramic Nylex liner and cheek pads quickly wick moisture away from the skin and eliminate odor causing bacteria. Padded chin strap design. Aerodynamic Vented Visor. Adjustable 3-screw ram-air visor with machined aluminum side and plastic center screws. Visor matches helmet graphics. Large eye port opening for greater visibility. Integrated non-slip goggle strap holders on each side of the eye port. Nylon strap retention snap neatly secures excess chin strap.. 780-600
4 on hand

More Info/Options for HJC CL-X5 Helmet 780-600

Xt 600

$71.99 Nelson-Rigg XX-Large Falcon Defender 600 Cover 560252COVER
Manufacturer: Nelson-Rigg
Dennis Kirk Part #: 560252XXL
Nelson-Rigg XX-Large Falcon Defender 600 Cover : Manufacturer part # 560252COVER - 100 percent waterproof Constructed from a lighter weight top quality Tri-Max® treated polyester. UVEX-treated to block out harmful UV rays that are the leading cause of color fading. Double-stitched, electrically heat-sealed seams and heat shield lower panels; soft windshield panel protector. The Perma-Venting® system prevents condensation build-up and permits constant air circulation. Elastic bottom with 1 in. grommets fits snugly at center and front wheel. Packed into its own tough backpack. , , NOTE: Not intended for trailering. 560252COVER
2 on hand

More Info/Options for Nelson-Rigg XX-Large Falcon Defender 600 Cover 560252COVER

Xt 600

$25.99 JIMS Transmission Sprocket Spacer .600 in. 33344-94
Manufacturer: JIMS
Dennis Kirk Part #: H27984
JIMS Transmission Sprocket Spacer .600 in.: Manufacturer part # 33344-94 - Spacers smooth finish gives a longer seal life. Sold each. Replaces OEM #33344-94.. 33344-94
2 on hand

More Info/Options for JIMS Transmission Sprocket Spacer .600 in. 33344-94

Xt 600

$427.99 C&A Pro Extreme XT Skis CA7BLK
Manufacturer: C&A Pro
Dennis Kirk Part #: 105894
C&A Pro Extreme XT Skis: Manufacturer part # CA7BLK - In a unique manufacturing process, each ski comes from a flat mold and is then bent into place -- which produces permanent outward pressure. The preloaded tips absorb much of the shock from a bump and keep it from the sled. The patented C&A all-plastic saddle is molded right into the ski, which makes for the most direct flex and reverse flex around. 90° angles on the square keel plus the flat-bottom design mean the ski floats on the snow while other skis rely on engineered-in lift. Tip flexibility is dramatically increased by the exclusive ball-and-cup loop assembly. Mounting kit must be purchased separately. Wearrods not included. Extreme XT The most aggressive ski in the industry in terms of quick response in turns. Ski is 7 1/4 in. wide and provides exceptional flotation in deep snow. 1 1/2 in. deep step-design center keel plus two 1/2 in. x 1/2 in. outer keels on each ski. Boxed-in saddle for added strength. Sold in pairs. , NOTE: For wear rods order the following, Roetin , Hi-performance X-PR-One part number 031394, Woodys , Top-Stock Hard Surface part number 031507, Extender Trail III part number 031852, Trail Blazer IV part number 031502, Executive Series part number 031504, Sno-Cross Competition Series part number 031366, Ultra Series part number 031600, Bergstrom Skegs , Triple 4 in. part number 031866, Triple 6 in. part number 031876, Triple 8 in. part number 031885, Type 1 part number 031730, Type 2 part number 031741, Type 4 part number 031762, Stud Boy , Shaper 6 in. part number 031655, Shaper 7 1/2 in. part number 031663, Switchback part number 031356, G-Force part number 031357. CA7BLK
3 on hand

More Info/Options for C&A Pro Extreme XT Skis CA7BLK

Xt 600

$219.99 Sno-Stuff Single Canister Rumble Pack Silencer 331-600
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 251147
Sno-Stuff Single Canister Rumble Pack Silencer: Manufacturer part # 331-600 - Extra kick, less weight with a unique, first-in-the-industry Dual Stage acoustical design. Get 4 to 8 more horsepower, depending on the application. Kits attach to stock exhaust pipes and include complete instructions. , NOTE: Will only fit three cylinder motors with single pipes. 331-600
6 on hand

More Info/Options for Sno-Stuff Single Canister Rumble Pack Silencer 331-600

Xt 600

$700.99 Camoplast Ice Ripper XT Track 9077H
Manufacturer: Camoplast
Dennis Kirk Part #: 01431
Camoplast Ice Ripper XT Track: Manufacturer part # 9077H - Studs are placed in precise locations of the lugs for the ultimate traction on any surface. Designed to keep the driver safe and secure. Ice Ripper tracks are the same as the Ice Claw with a little something extra. Designed for ultimate traction, performance for all conditions. DRIVE No.: 48 DRIVE PITCH: 2.52 in. LUG HEIGHT: 1.250 in. WEIGHT: 37 lb. CLIP CONFIGURATION/NOTES: Fully, sharp stud RECOMMENDED USE: Trail/Snocross/Cross Country IMPORTANT NOTE: Before ordering, check the height of your track lugs and order the matching height listed for your machine. Whenever ordering an optional taller-lug track, you must check for bulkhead, tunnel and heat exchanger clearance. The applications listed is for the track to fit the suspension and be the same length as original equipment only - it is your responsibility to ensure there is sufficient clearance.. 9077H
5 on hand

More Info/Options for Camoplast Ice Ripper XT Track 9077H

Xt 600

$7.99 HJC Visor 802-600
Manufacturer: HJC
Dennis Kirk Part #: 324536
HJC Visor : Manufacturer part # 802-600 -. 802-600
9 on hand

More Info/Options for HJC Visor 802-600

Xt 600

$94.99 Sno-Stuff Smoke Peakline Windshield With Black Checkers 480-600-60
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 232651
Sno-Stuff Smoke Peakline Windshield With Black Checkers: Manufacturer part # 480-600-60 - The aggressive aerodynamic ribs on our Peak windshields make them stand out from the crowd. Rubberized coating on flat-black finish. Lasting good looks from clearcoat finish. Windshield edge has rubber trim ring. , , All windshields are protected with plastic shrink-wrap for shipping. Before removing, be certain that you are going to keep it. Windshields with plastic-wrap removed are not returnable.. 480-600-60
3 on hand

More Info/Options for Sno-Stuff Smoke Peakline Windshield With Black Checkers 480-600-60

Xt 600

$94.99 Sno-Stuff Gloss Black Peakline Windshield 480-600-50
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 232650
Sno-Stuff Gloss Black Peakline Windshield: Manufacturer part # 480-600-50 - The aggressive aerodynamic ribs on our Peak windshields make them stand out from the crowd. Rubberized coating on gloss black finish. Lasting good looks from clearcoat finish. Windshield edge has rubber trim ring. , , All windshields are protected with plastic shrink-wrap for shipping. Before removing, be certain that you are going to keep it. Windshields with plastic-wrap removed are not returnable.. 480-600-50
Expected Soon

More Info/Options for Sno-Stuff Gloss Black Peakline Windshield 480-600-50

Xt 600

$398.99 Sno-Stuff Lexan Hood 455-600
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 392027
Sno-Stuff Lexan Hood: Manufacturer part # 455-600 - Popular on the race circuit, these durable polycarbonate hoods are now available for many popular trail and touring sleds. Super lightweight, strong hoods can withstand extreme abuse. An excellent choice when replacing your OEM hood and offers unlimited customizing options. Average weight savings of 8 lbs. over OEM hoods. During forming, some very slight mark off will occur on the clear hoods. All vents and other holes are cut out. Hoods are paintable--paint from the inside. Do not use paints containing Toluene or Xylene.. 455-600
1 on hand

More Info/Options for Sno-Stuff Lexan Hood 455-600

Xt 600

$19.99 Joe Rocket Honda CBR 600 Racing T-Shirt 778-4004
Manufacturer: Joe Rocket
Dennis Kirk Part #: 3410234L
Joe Rocket Honda CBR 600 Racing T-Shirt: Manufacturer part # 778-4004 - Cotton blend short sleeve t-shirt. Flat screened logos.. 778-4004
5 on hand

More Info/Options for Joe Rocket Honda CBR 600 Racing T-Shirt 778-4004

Xt 600

$5.99 Genuine Mikuni Main Jet - Size 600 K4042600
Manufacturer: Mikuni
Dennis Kirk Part #: 1728600
Genuine Mikuni Main Jet - Size 600: Manufacturer part # K4042600 - Brass main jets are available in sizes 50 through 200 in increments of 5, in sizes 210 through 500 in increments of 10 and in sizes 520 through 720 in increments of 20.. K4042600
2 on hand

More Info/Options for Genuine Mikuni Main Jet - Size 600 K4042600

Xt 600

Xt 600