$189.99Daytona Twin Tec Twin Tuner Fuel-Injection Controller p202126
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 202126
Daytona Twin Tec Twin Tuner Fuel-Injection Controller: Manufacturer part # p202126 - Note: This item ships 3-4 days after the order is processed , , Allows easy adjustments to OEM Delphi fuel-injection systems to improve performance and match the requirements of performance parts. Mode and up/down pushbutton switches make fuel trim adjustments in the RPM and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display. Advanced mode (using optional USB Interface OUR PART #20-1555 and PC Link Tuner software) allows precise fuel adjustments and independent adjustments to the front and rear cylinders. Can use DynoJet Power Commander maps. Easy plug-in installation and setup. Compact size only 4" L x 2" W x 1/2" H. Compatible with Twin Scan II+ Tuning Aid install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software. For Big Twin 01 and up with 36-pin Delphi EFI (except FLHT/FLHR/FLHX/FLTR 08-09 with electronic throttle control) and Buell XB, 1125R 08-09 with DDFI fuel-injection system.. p202126 1 on hand
$11.99Maxima Primary Case Lubricant for Big Twins and XL 84-07 46901
Manufacturer: Maxima
Dennis Kirk Part #: 304393
Maxima Primary Case Lubricant for Big Twins and XL 84-07: Manufacturer part # 46901 - 100% synthetic with advanced additives to reduce clutch and fluid drag. Lubricates all critical primary case components, including gears, sprockets and chains. PAO synthetics let the lubricant function at higher temperatures. For use in models with wet diaphragm spring clutches. Liter (33.8 oz.) bottle.. 46901 6 on hand
$49.99Fast-Trac Air Lite Twin Stud XL Polymer Backers p080517
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080517
Fast-Trac Air Lite Twin Stud XL Polymer Backers: Manufacturer part # p080517 - Made of DuPont polymers and will add rigidity to studs. Twin XL backers are made to fit your Top Gun and Triple X-Series studs measuring 1.175" and longer. For 5/16" studs. Sold in packs of 48.. p080517 5 on hand
$417.99Daytona Twin Tec Twin Cam Ignition Kits 3088
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 201093
Daytona Twin Tec Twin Cam Ignition Kits: Manufacturer part # 3088 - Includes new 12-pin TC88A ignition module, PC link cable, single-fire coil, and spark plug wires. Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors. Five rotary switches for timing adjustments, advanced slope and rpm limits. Digital rpm limiter (set in 100-rpm steps). Selectable multi-spark mode for quick starts and smooth running. Coil outputs are protected against short circuits. Instructions included. Made in the U.S.A... 3088 1 on hand
$360.99Daytona Twin Tec Twin Cam Ignition Kits 3008
Manufacturer: Daytona Twin Tec
Dennis Kirk Part #: 201021
Daytona Twin Tec Twin Cam Ignition Kits: Manufacturer part # 3008 - Daytona Twin Tec LLC has a simple philosophy - do one thing and do it well. Kit for Twin Cam 88 99-03 carb models features an ignition module, spark plug wires and single-fire coil. Module has two advance curve groups with adjustable advance curves to accommodate stock and mod motors. Five rotary switches for timing adjustments, advanced slope and rpm limits. Digital rpm limiter (set in 100-rpm steps). Selectable multi-spark mode for quick starts and smooth running. Coil outputs are protected against short circuits. Optional PC link cable and software available for programming custom curves, programs available at (www.daytona-twintec.com). Instructions included. Made in the U.S.A.. For models listed with two 6-pin ignition module connectors. 3008 1 on hand
$14.99Crane Cams Valve Key for Big Twin and XL Evolution 51300
Manufacturer: Crane Cams
Dennis Kirk Part #: H14665
Crane Cams Valve Key for Big Twin and XL Evolution: Manufacturer part # 51300 - 155 lb. Spring pressure. Two different spring pressure strengths available. For 175 lb. spring pressure use H14666. Sold as complete sets of four, replaces OEM NO. 18229-83. Made in the U.S.A... 51300 1 on hand
$14.99Crane Cams Valve Key for Big Twin and XL Evolution 51301
Manufacturer: Crane Cams
Dennis Kirk Part #: H14666
Crane Cams Valve Key for Big Twin and XL Evolution: Manufacturer part # 51301 - 175 lb Spring pressure. Two different spring pressure strengths available. For 155 lb. spring pressure use H14665. Sold as complete sets of four, replaces OEM NO. 18229-83. Made in the U.S.A... 51301 2 on hand
$49.99Fast-Trac Air Lite Twin Stud XL Polymer Backers p080517 080518
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080518
Fast-Trac Air Lite Twin Stud XL Polymer Backers: Manufacturer part # p080517 - DennisKirk Part # 080518 - Made of DuPont polymers and will add rigidity to studs. Twin XL backers are made to fit your Top Gun and Triple X-Series studs measuring 1.175" and longer. For 5/16" studs. Sold in packs of 48.. p080517 3 on hand
$49.99Fast-Trac Air Lite Twin Stud XL Polymer Backers p080517 080519
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080519
Fast-Trac Air Lite Twin Stud XL Polymer Backers: Manufacturer part # p080517 - DennisKirk Part # 080519 - Made of DuPont polymers and will add rigidity to studs. Twin XL backers are made to fit your Top Gun and Triple X-Series studs measuring 1.175" and longer. For 5/16" studs. Sold in packs of 48.. p080517 4 on hand
$49.99Fast-Trac Air Lite Twin Stud XL Polymer Backers p080517 080520
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080520
Fast-Trac Air Lite Twin Stud XL Polymer Backers: Manufacturer part # p080517 - DennisKirk Part # 080520 - Made of DuPont polymers and will add rigidity to studs. Twin XL backers are made to fit your Top Gun and Triple X-Series studs measuring 1.175" and longer. For 5/16" studs. Sold in packs of 48.. p080517 2 on hand
$36.99Power Flo Twin Air Replacement Filter TA150210X
Manufacturer: Twin Air
Dennis Kirk Part #: 304810
Power Flo Twin Air Replacement Filter: Manufacturer part # TA150210X - You can now get the same factory treatment that race teams and OEMs receive. Filters are pre-oiled with Twin Air BIO Foam Filter Oil. State-of-the-art filter oiling machines are used to provide the ultimate consistency in pore coverage. Same industry-leading Twin Air Filter you are used to, now pre-oiled for your convenience. Resealable bag for added convenience.. TA150210X 1 on hand
$36.99Power Flo Twin Air Replacement Filter TA152313X
Manufacturer: Twin Air
Dennis Kirk Part #: 304820
Power Flo Twin Air Replacement Filter: Manufacturer part # TA152313X - You can now get the same factory treatment that race teams and OEMs receive. Filters are pre-oiled with Twin Air BIO Foam Filter Oil. State-of-the-art filter oiling machines are used to provide the ultimate consistency in pore coverage. Same industry-leading Twin Air Filter you are used to, now pre-oiled for your convenience. Resealable bag for added convenience. Includes the Backfire Filter.. TA152313X 1 on hand