|
|
$269.95
Jagg Vertical Mount Ten-Row Oil Cooler p492467
Manufacturer: Jagg
Dennis Kirk Part #: 494730
Jagg Vertical Mount Ten-Row Oil Cooler: Manufacturer part # p492467 - Unique inline airflow orientation of the ten-row high-performance cooler capitalizes on the low pressure created by the integrated airfoil to draw air "inside-out" through the oil cooler for superior cooling of the engine oil. Extremely efficient ten-row coolers mount vertically on the left downtube frame and virtually disappear on the bike. Require the use of offset oil filter adapter Part # 49-2469 to access oil supply. , , INCLUDED ITEMS , (1) Oil cooler and bracket assembly, (2) 1/4 in. Frame clamp W/nuts and bolts, (1) Oil hose section, (2) 7/8 in. Black hose clamps. p492467
1 on hand
More Info/Options for Jagg Vertical Mount Ten-Row Oil Cooler p492467
Vertical Mount
|
|
|
|
$199.95
Jagg Vertical Mount Ten-Row Oil Cooler 2200
Manufacturer: Jagg
Dennis Kirk Part #: 492468
Jagg Vertical Mount Ten-Row Oil Cooler: Manufacturer part # 2200 - Unique inline airflow orientation of the ten-row high-performance cooler capitalizes on the low pressure created by the integrated airfoil to draw air "inside-out" through the oil cooler for superior cooling of the engine oil. Extremely efficient ten-row coolers mount vertically on the left downtube frame and virtually disappear on the bike. Require the use of offset oil filter adapter Part # 49-2469 to access oil supply. Will not fit Dresser Ultra with optional lower fairings installed.. 2200
1 on hand
More Info/Options for Jagg Vertical Mount Ten-Row Oil Cooler 2200
Vertical Mount
|
|
|
|
$269.95
Jagg Vertical Mount Ten-Row Oil Cooler p492467 494731
Manufacturer: Jagg
Dennis Kirk Part #: 494731
Jagg Vertical Mount Ten-Row Oil Cooler: Manufacturer part # p492467 - DennisKirk Part # 494731 - Unique inline airflow orientation of the ten-row high-performance cooler capitalizes on the low pressure created by the integrated airfoil to draw air "inside-out" through the oil cooler for superior cooling of the engine oil. Extremely efficient ten-row coolers mount vertically on the left downtube frame and virtually disappear on the bike. Require the use of offset oil filter adapter Part # 49-2469 to access oil supply. , , NOTE: , Will not fit Dresser Ultra with optional lower fairings installed. , , Included Items:. , 1. (1) Oil cooler and bracket assembly. , 2. (1) 1 1/8" frame clamp with nut and bolt. , 3. (1) Oil hose section , 4. (2) 7.8" black hose clamps. , 5. (1) 1 1/4" frame clamp with nut and bolt. p492467
1 on hand
More Info/Options for Jagg Vertical Mount Ten-Row Oil Cooler p492467 494731
Vertical Mount
|
|
|
|
$199.95
Jagg Vertical Mount Ten-Row Oil Cooler 2100
Manufacturer: Jagg
Dennis Kirk Part #: 492467
Jagg Vertical Mount Ten-Row Oil Cooler: Manufacturer part # 2100 - Unique inline airflow orientation of the ten-row high-performance cooler capitalizes on the low pressure created by the integrated airfoil to draw air "inside-out" through the oil cooler for superior cooling of the engine oil. Extremely efficient ten-row coolers mount vertically on the left downtube frame and virtually disappear on the bike. Require the use of offset oil filter adapter Part # 49-2469 to access oil supply.. 2100
1 on hand
More Info/Options for Jagg Vertical Mount Ten-Row Oil Cooler 2100
Vertical Mount
|
|
|
|
$89.95
Moose Winch Mount p512578
Manufacturer: Moose
Dennis Kirk Part #: 512578
Moose Winch Mount: Manufacturer part # p512578 - Winch mount kits accept Warn, Ramsey and Superwinch winches, except Warn 4.0 (the mount bolt pattern is different). Come complete with roller fairlead. WHAT TO ORDER WITH THIS ITEM: Plow Blade: Choose one of 42 in., 50 in. 55 in., 60 in., or 72 in. Standard Blade; or a 50 in. or 60 in. Country Blade. Extended Bottom Mount: Part No. 514364 Extended Lift Push Tube: Part No. 514355. If you be will using a Track System on an ATV order Part No. 516089 , , INLCUDED ITEMS: . , (1) Winch mount, (1) Roller fairlead, (6) Off-set brackets, (2) 1 in. U-clamps, (2) 3/8 in. X 2 in. hex bolts, (2) 3/8 in. nylock nuts, (2) 5/16 in. X 3/4 in. hex bolts, (2) 5/16 in. nylock nuts, (6) 8MM X 20MM bolts, (1) Instruction sheet. p512578
1 on hand
More Info/Options for Moose Winch Mount p512578
Vertical Mount
|
|
|
|
$264.95
Moose Rapid Mount Plow Frame p516350
Manufacturer: Moose
Dennis Kirk Part #: 516350
Moose Rapid Mount Plow Frame : Manufacturer part # p516350 - Moose plow system?s third generation. Uses a compact front mount design that provides over 20 in. of lift height. After the original 30 minutes installation, you can mount or un-mount within seconds. Only works with a winch lift. Fits all Moose plow blades. Comes in black powder-coated paint. , , WHAT TO ORDER: Moose Plow Blade: Your choice Rapid Mount Plate: To be searched by make, model, and year Winch Mount: To be searched by make, model, and year INCLUDED ITEMS:. (1) Frame (2) Latches (1) 16mm I.D. x 30mm O.D. x 3mm Flat Washers (1) 1/16 in. D x 14-3/4 in. Cable (1) Pivot (1) Locking arm bracket (1) Locking pin (1) Locking arm (1) Support plate (1) Pull bar (1) Pull bar extension (1) Locking arm spring (1) M4-0.70 x 30mm Hex bolt (1) M8-1.25 x 40mm Hex bolt (1) M16-1.5 Nylock nut (2) M8-1.25 x 100mm Eyebolts (2) M10-25mm Hex bolts (2) M4-0.70 x 25mm Hex bolts (2) M6-1.0 x 25mm Hex bolts (10) M8-1.25 x 20mm Hex bolts (2) M8-1.25 x 65mm Hex bolts (2) 5/16 in. Nylock nuts (2) M10-1.5 Nylock nuts (3) M4-0.70 Nylock nuts (4) M6-1.0 Nylock nuts (15) M8-1.25 Nylock nuts (2) 3/8 in. D x 3/4 in. Flange screws (2) Exhaust springs (2) Arm links (2) Adjustable blade stops (2) 1 in. D x 13.5 in. x 43 lbs Tension springs (1) Instruction sheet. p516350
Expected Soon
More Info/Options for Moose Rapid Mount Plow Frame p516350
Vertical Mount
|
|
|
|
$121.95
Moose Extended Lift Bottom Mount p515357
Manufacturer: Moose
Dennis Kirk Part #: 515357
Moose Extended Lift Bottom Mount: Manufacturer part # p515357 - Quick-connect mounting hardware allows easy hook-up and fast removal. Universal, heavy-duty push tube withstands the roughest use. Blade swivel constructed of 3/8 in. steel with 20 in. blade attaching points for greater blade support and strength. Open swivel eliminates dirt and snow build-up in the pivot point. Five blade swivel positions and four-way blade pitch adjustment. ATV plow bottom-mount kits include all necessary hardware to attach universal push tube and plow to your ATV. Winch mounts sold separately so customers can get exactly what they want. Hand lift kit sold separately -- customers don't pay for equipment they won't use with an electric lift. Winch mount kits accept Warn, Ramsey and Superwinch winches; come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Universal Extended Lift Push Tube: Part No. 51-4355. Moose Blade Lift System: Choose ONE of the following: **Electric Lift Part No. 51-5893 **Winch Mount Part No. 51-5356 INCLUDED ITEMS:. (5) 3/8 in. Nylock nuts (1) 1/2 in. x 3/4 in. Shoulder bolt (1) 1/2 in. Flat washer (1) Push tube runner (1) Blade position pin (1) Bottom mount (2) 3/8 in. x 2-1/2 in. Wire loop pins (2) 5/16 in. x 1-1/4 in. x 2 in. U-bolts (8) 5/16 in. Flat washers (8) 5/16 in. Nylock nuts (1) Instruction sheet. p515357
1 on hand
More Info/Options for Moose Extended Lift Bottom Mount p515357
Vertical Mount
|
|
|
|
CLEARANCE!
Was: $89.95
Now: $67.46
Moose Winch Mount p512577
Manufacturer: Moose
Dennis Kirk Part #: 512577
Moose Winch Mount: Manufacturer part # p512577 - Winch mount kits accept Warn, Ramsey and Superwinch winches, except Warn 4.0 (the mount bolt pattern is different). Come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Extended Bottom Mount: Part No. 51-4373 Extended Lift Push Tube: Part No. 51-4355 If you be will using a Track System on an ATV order Part No. 516089 INCLUDED ITEMS:. (1) Winch mount (1) Roller fairlead (2) 3/8 in. x 2-1/2 in. Hex bolts (2) 3/8 in. Nylock nuts (2) 5/16 in. x 3/4 in. Hex bolts (2) 5/16 in. Nylock nuts (2) 3/8 in. x 1-1/4 in. Spacers (2) 1-1/2 in. U-clamps (4) 5/16 i n. Flat washers (2) 8mm x 25mm Bolts (1) Instruction sheet. p512577
1 on hand
More Info/Options for Moose Winch Mount p512577
Vertical Mount
|
|
|
|
|
|
|
|
$80.99
Parts Unlimited Tour Box Rack Flag Mount p499810
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 618335
Parts Unlimited Tour Box Rack Flag Mount: Manufacturer part # p499810 - 12 in. tall with 6 in. x 9 in. flag. Bolts directly to 5/8 in. Bar on Harley-Davidson® tour box racks on most classics. Folds down easily to avoid poking a hole in bike cover; with the pole folded, the mount is about 1-7/8 in. tall (above the round tube it's mounted to). Made of polished stainless steel. Comes with American flag. POW-MIA and Dixie flags sold separately.. p499810
2 on hand
More Info/Options for Parts Unlimited Tour Box Rack Flag Mount p499810
Vertical Mount
|
|
|
|
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
