Universal Trailer Hitch

$324.95 Drag Specialties Deluxe Trailer HItch 720600B
Manufacturer: Drag Specialties
Dennis Kirk Part #: H55103
Drag Specialties Deluxe Trailer HItch: Manufacturer part # 720600B - Use it with all the major H-D accessories, except the rear dresser bar, OEM NO. 49158-89. Intermediate brace connected to the exhaust systems hanger bracket controls sway. Chromed vertical supports handle-tongue weight up to 30 lb.. Fore and aft load (up to 350 lb.) is transmitted to the unsprung portion of the frame via two painted steel stress members. Includes mounting hardware (chrome where applicable), a 1 7/8in. chrome ball and instructions. Made in the U.S.A... 720600B
4 on hand

More Info/Options for Drag Specialties Deluxe Trailer HItch 720600B

Universal Trailer Hitch

$215.95 Drag Specialties Chrome Trailer Hitch 720555A
Manufacturer: Drag Specialties
Dennis Kirk Part #: H55150
Drag Specialties Chrome Trailer Hitch : Manufacturer part # 720555A - Chrome design is a perfect match for our saddlebag light bars. Includes 1 7/8in. ball. Made of heavy-duty steel, the hitch plate is reinforced for extra strength. Includes a chrome ball and mounting hardware; made in the U.S.A.. , , WARNING: We are aware of no current state or federal guidelines for pulling a trailer with a motorcycle. We suggest when loading and pulling a trailer you do not exceed the motorcycle manufacturer's Gross Vehicle Weight limits. The tongue weight of the trailer, when attached to the hitch, must not exceed 10 percent of the total trailer weight and its contents -- with the maximum tongue weight not to exceed 30 lb. Also, remember when pulling a trailer with a motorcycle, extra distance must be allowed for stopping and a slower speed used when cornering. Use extra caution, and don't exceed your limits.. 720555A
4 on hand

More Info/Options for Drag Specialties Chrome Trailer Hitch 720555A

Universal Trailer Hitch

$39.95 Drag Specialties Trailer Hitch Receptacle Kit 725558BC324
Manufacturer: Drag Specialties
Dennis Kirk Part #: H55151
Drag Specialties Trailer Hitch Receptacle Kit: Manufacturer part # 725558BC324 - For FLT, FLHT, FLHS, FLHR and Softail 86 and up. Easily mounts to the underside of the hitch plate for a quick, clean way to both connect or disconnect the trailer light wiring. Includes a chromed receptacle plate, chrome safety chain hookup, a five-pin male/female plug-in connector and all wiring and hardware, , Note: Fits other brands of trailer hitches. 725558BC324
More than 10 on hand

More Info/Options for Drag Specialties Trailer Hitch Receptacle Kit 725558BC324

Universal Trailer Hitch

$160.99 Kuryakyn Trailer Hitch with 1 7/8 in. Trailer Ball 9181
Manufacturer: Kuryakyn
Dennis Kirk Part #: 515037
Kuryakyn Trailer Hitch with 1 7/8 in. Trailer Ball: Manufacturer part # 9181 - Full function and striking good looks. Will work even if your bike has saddlebag lightbars. Reinforced hitch plate and heavy-duty steel hitch construction. All necessary mounting hardware and 1 7/8 in. trailer ball included.. 9181
More than 10 on hand

More Info/Options for Kuryakyn Trailer Hitch with 1 7/8 in. Trailer Ball 9181

Universal Trailer Hitch

CLEARANCE!
Was: $23.99
Now: $17.99
Kuryakyn Mudflap Adapter 7646
Manufacturer: Kuryakyn
Dennis Kirk Part #: 392371
Kuryakyn Mudflap Adapter: Manufacturer part # 7646 - Required when using Debris Modulator with Part No. 27-1113.. 7646
2 on hand

More Info/Options for Kuryakyn Mudflap Adapter 7646

Universal Trailer Hitch

$29.99 Kuryakyn Chrome Mudflap Extension - Front 7354
Manufacturer: Kuryakyn
Dennis Kirk Part #: 392370
Kuryakyn Chrome Mudflap Extension - Front: Manufacturer part # 7354 - Keep a lot of water and dirt down on the road where it belongs with this functional chrome accessory.. Provides 3 3/8 extension to the front fender... 7354
1 on hand

More Info/Options for Kuryakyn Chrome Mudflap Extension - Front 7354

Universal Trailer Hitch

$21.95 Drag Specialties Large Studded Mud Flap w/Concho 7808-1079
Manufacturer: Drag Specialties
Dennis Kirk Part #: 392258
Drag Specialties Large Studded Mud Flap w/Concho: Manufacturer part # 7808-1079 - Made of rugged 1/8 in. rubber for a long life. Brass accents have a nickel-chrome finish. Stainless steel conchos will not rust. Include mounting hardware. 6 1/2 in. W at mounting. Can be trimmed to fit. Made in the U.S.A. Mesurement: 10 1/2 in. W x 8 in. H. 7808-1079
8 on hand

More Info/Options for Drag Specialties Large Studded Mud Flap w/Concho 7808-1079

Universal Trailer Hitch

$45.95 Drag Specialties Large Chrome Eagle Head with Lights Fender Ornament DS287553
Manufacturer: Drag Specialties
Dennis Kirk Part #: H50022
Drag Specialties Large Chrome Eagle Head with Lights Fender Ornament: Manufacturer part # DS287553 - Choose from all chrome or chrome with a gold head-H50023. Each is available with eyes that light up. Die-cast in two different sizes: 1 1/2 in. high and 2 1/2 in. high. Made to fit most front fenders. Gasket and mounting hardware are included. , NOTE: For replacement bulb order 22-276. DS287553
1 on hand

More Info/Options for Drag Specialties Large Chrome Eagle Head with Lights Fender Ornament DS287553

Universal Trailer Hitch

$58.95 Drag Specialties Large Chrome/Gold Eagle Head with Lights Fender Ornament DS287552
Manufacturer: Drag Specialties
Dennis Kirk Part #: H50023
Drag Specialties Large Chrome/Gold Eagle Head with Lights Fender Ornament: Manufacturer part # DS287552 - Choose from all chrome-H50022 or chrome with a gold head. Each is available with eyes that light up. Die-cast in two different sizes: 1 1/2 in. high and 2 1/2 in. high. Made to fit most front fenders. Gasket and mounting hardware are included. , NOTE: For replacement bulb order 22-276. DS287552
2 on hand

More Info/Options for Drag Specialties Large Chrome/Gold Eagle Head with Lights Fender Ornament DS287552

Universal Trailer Hitch

$161.99 Klock Werks Curvaceous Upper Filler Panel p506567
Manufacturer: Klock Werks
Dennis Kirk Part #: 506567
Klock Werks Curvaceous Upper Filler Panel: Manufacturer part # p506567 - Upper fillers accent the line of your rear fender and hide clutter. Fillers mate up to the stock fender/lower filler on Street Glides. Steel construction with black coating comes ready to color match paint. Requires removal of stock license plate mount bar. Two versions -- one for models with or without detachable backrests; one for models with detachable tour packs. Made in the U.S.A.. Note: Installation requires the removal of the grab rail/license plate mount. Items Included: Two upper fillers. Two 5/16 in. x 1/2 in. spacers. Two 5/16 in. x 1/4 in. spacers. Two 1/4 in. washers. Two 1/4 in. x 1 1/2 in. hex bolts. Two strut support brackets. Four 5/16 in. x 1 1/4 in. hex bolts. Four 5/16 in. nylock nuts.. p506567
1 on hand

More Info/Options for Klock Werks Curvaceous Upper Filler Panel p506567

Universal Trailer Hitch

$161.99 Klock Werks Curvaceous Upper Filler Panel p506566
Manufacturer: Klock Werks
Dennis Kirk Part #: 506566
Klock Werks Curvaceous Upper Filler Panel: Manufacturer part # p506566 - Upper fillers accent the line of your rear fender and hide clutter. Fillers mate up to the stock fender/lower filler on Street Glides. Steel construction with black coating comes ready to color match paint. Requires removal of stock license plate mount bar. For models with or without detachable backrests. Made in the U.S.A.. Note: Installation requires the removal of the grab rail/license plate mount. Items Included: Two upper fillers. Two 5/16 in. x 1/2 in. spacers. Two 5/16 in. x 1/4 in. spacers. Two 1/4 in. washers. Two 1/4 in. x 1 1/2 in. hex bolts. Two strut support brackets. Four 5/16 in. x 1 1/4 in. hex bolts. Four 5/16 in. nylock nuts.. p506566
2 on hand

More Info/Options for Klock Werks Curvaceous Upper Filler Panel p506566

Universal Trailer Hitch

$94.99 Klock Werks Smooth Lower Fillers p506672
Manufacturer: Klock Werks
Dennis Kirk Part #: 506672
Klock Werks Smooth Lower Fillers: Manufacturer part # p506672 - Fill the void between the lower fender and saddlebags. Use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area. Stamped from 16-gauge U.S. steel, these fillers are E-coated to prevent rust and corrosion and for minimal paint prep as well. They are a minor detail with major results. Sold in pairs and include all necessary hardware and instructions to install them. Made in the U.S.A.. , Included Items: , (2) Klock Werks lower fillers, (4) 5/16 in. x 3/4 in. Hex Bolts, , NOTE: Not for use with saddlebag rails., NOTE: For use with or without detachable backrest NOTE: This item ships in 3-4 days after the order is placed.. p506672
1 on hand

More Info/Options for Klock Werks Smooth Lower Fillers p506672

Universal Trailer Hitch

Universal Trailer Hitch