$47.99Ricks Universal Type 3-Phase Rectifier 10500
Manufacturer: Ricks
Dennis Kirk Part #: 21578
Ricks Universal Type 3-Phase Rectifier: Manufacturer part # 10500 - Fits many older 4-cylinder bikes. 10500 2 on hand
$7.99Novus Polish 3 NOVUS NO 3
Manufacturer: Novus
Dennis Kirk Part #: 301300
Novus Polish 3: Manufacturer part # NOVUS NO 3 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 takes out heavy scratches in Lucite® and Plexiglas® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 - (3186) is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 3 More than 10 on hand
CLOSEOUT!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods/22" 3-Stud C-K13
Manufacturer: Bergstrom
Dennis Kirk Part #: 031944
Bergstrom Type 1 Carbide Wear Rods/22" 3-Stud: Manufacturer part # C-K13 - Four inches of 1/8 in., 90 degree center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , DIMENSIONS: Length x Diameter: 22" x 7/16" Stud Diameter x Length: 5/16" x 5/8" Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 2-5/8" 1st to 2nd: 6-3/4" 2nd to 3rd: 6-7/8" 3rd to End: 5-1/4". C-K13 More than 10 on hand
CLEARANCE!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods/17.75" 3-Stud C-K21
Manufacturer: Bergstrom
Dennis Kirk Part #: 032008
Bergstrom Type 1 Carbide Wear Rods/17.75" 3-Stud: Manufacturer part # C-K21 - Four inches of 1/8 in., 90 degree center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , DIMENSIONS: Length x Diameter: 17-3/4" x 7/16" Stud Diameter x Length: 5/16"" x 1-1/2" Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 2-5/8" 1st to 2nd: 3-3/4" 2nd to 3rd: 8-3/4" 3rd to End: 2-5/8". C-K21 7 on hand
$24.95Sport Parts Inc. 3 in. Handlebar Riser SM-08078-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592880
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08078-3 - Black extruded 6061 T-6 aluminum risers. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08078-3 10 on hand
$24.95Sport Parts Inc. 3 in. Handlebar Riser SM-08068-3
Manufacturer: Sport Parts Inc.
Dennis Kirk Part #: 592877
Sport Parts Inc. 3 in. Handlebar Riser: Manufacturer part # SM-08068-3 - Black extruded 6061 T-6 aluminum riser. Include riser, four nuts and four bolts. Throttle cable extensions kit (sold separately) allows up 10" of additional reach, Part No. 194404. SM-08068-3 10 on hand
$179.99Hot Cams Stage 3 Stroker Hot Cam 1078-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149994
Hot Cams Stage 3 Stroker Hot Cam: Manufacturer part # 1078-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. Single-cam motor. Huge top-end and great over rev in supermoto and big bore/strokers Uses stock valve springs and auto-decompression mechanism. , Specs: , Intake Lift: 10.4mm, Intake Duration (@1mm): 251.5 Degrees, Exhaust Lift: 9.05mm, Exhaust Duration (@ 1mm): 265 Degrees. 1078-3 1 on hand
CLEARANCE!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods/20.5" 3-Stud CK10
Manufacturer: Bergstrom
Dennis Kirk Part #: 031735
Bergstrom Type 1 Carbide Wear Rods/20.5" 3-Stud: Manufacturer part # CK10 - Four inches of 1/8 in., 90º center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , DIMENSIONS: Length x Diameter: 20-1/2" x 7/16" Stud Diameter x Length: 3/8" x 3/4" Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 6-1/4" 1st to 2nd: 7" 2nd to 3rd: 5-1/2" 3rd to End: 2-1/4" , NOTE: Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. CK10 3 on hand
$8.99K & S Flasher Relay-3 Pole Electronic Type 240002
Manufacturer: K & S
Dennis Kirk Part #: 211390
K & S Flasher Relay-3 Pole Electronic Type: Manufacturer part # 240002 - 12V electronic-type 3-pole flasher relay with a maximum of 20A. DOT approved.. 240002 2 on hand
$179.99Hot Cams Stage 3 Cam 1051-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149530
Hot Cams Stage 3 Cam: Manufacturer part # 1051-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Recomended for big-bore stroker applications only, for mid-range, and top end, , Intake Lift: 9.1mm, Intake Duration (@ 1mm): 262 Degress, Exhaust Lift: 9mm, Exhaust Duration (@ 1mm): 257 Degress. 1051-3 1 on hand
$179.99Hot Cams Stage 3 Stroker Cam 1056-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149531
Hot Cams Stage 3 Stroker Cam: Manufacturer part # 1056-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Specifically designed to produce more mid-range and top-end power in big bore and stroker applications - not stock displacement, , Intake Lift: 10.4mm, Intake Duration (@ 1mm): 251.5 Degrees, Exhaust Lift: 9mm, Exhaust Duration: (@ 1mm): 265 Degress. 1056-3 2 on hand
$179.99Hot Cams Stage 3 Cam 4050-3
Manufacturer: Hot Cams
Dennis Kirk Part #: 149548
Hot Cams Stage 3 Cam: Manufacturer part # 4050-3 - Extract maximum performance from your engine. Hot Cams provide increased intake and exhaust duration for improved breathability and more horsepower. Provides significantly more mid-range punch and top-end speed for most models. Core trade-in not required so you can keep the original camshaft. , NOTE: Specifically designed for big bore and stroker applications - not stock displacement, , Intake Lift: 10.16mm, Intake Duration (@ 1mm): 265 Degrees, Exhaust Lift: 10.82mm, Exhaust Duration (@ 1mm): 271 Degrees NOTE: Requires kibblewhite spring kit part NO. 18-1872 to work properly - Must be ordered separately... 4050-3 2 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
