|
|
$59.50
Bergstrom Type 2 Carbide Wear Rods/19.5" 4-Stud 031990
Dennis Kirk Part #: 031990
Bergstrom Type 2 Carbide Wear Rods/19.5" 4-Stud 031990: Manufacturer part # C6-Q16 - Six inches of 1/8 in., 90 degree center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , DIMENSIONS: Length x Diameter: 19-1/2" x 7/16" Stud Diameter x Length: Two End Studs: 5/16" x 1-1/4" Two Center Studs: 5/16" x 1-3/4" Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 2" 1st to 2nd: 2-7/8" 2nd to 3rd: 8-3/8" 3rd to 4th: 4-5/8" 4th to End: 1-3/4". C6-Q16
3 on Hand
More Info/Options for Bergstrom Type 2 Carbide Wear Rods/19.5" 4-Stud 031990
|
|
|
|
|
|
|
|
CLOSEOUT!
Was: $34.95
Now: $14.95
Slippery Infant Reform Type 2 Vest 3406341
Dennis Kirk Part #: 3406341
Slippery Infant Reform Type 2 Vest 3406341: Manufacturer part # 32420003 - U.S. Coast Guard-approved Type 2 PFD. Flotation pillow helps keep head above water and is mandatory in many states. Infant vest uses a two-belt closure and crotch strap for a more secure fit, fits riders under 50 lb.. Large vest fits riders 50-90 lb.; 20" - 25" chest.. 32420003
1 on Hand
More Info/Options for Slippery Infant Reform Type 2 Vest 3406341
|
|
|
|
$59.50
Bergstrom Type 2 Carbide Wear Rods 031742
Dennis Kirk Part #: 031742
Bergstrom Type 2 Carbide Wear Rods 031742: Manufacturer part # C6C&AT - Six inches of 1/8 in., 90º center control carbide mounted on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , NOTE: Fits C&A Sport Skis. , , DIMENSIONS: Length x Diameter: 18" x 7/16" Stud Diameter x Length: 3/8" x 1-3/4" Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 3" 1st to 2nd: 3-3/4" 2nd to 3rd: 4" 3rd to 4th: 4" 4th to End: 3-1/4". C6C&AT
3 on Hand
More Info/Options for Bergstrom Type 2 Carbide Wear Rods 031742
|
|
|
|
$59.50
Bergstrom Type 2 Carbide Wear Rods 031823
Dennis Kirk Part #: 031823
Bergstrom Type 2 Carbide Wear Rods 031823: Manufacturer part # C6H06 - Six inches of 1/8 in., 90º center control carbide mounted on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , NOTE: Fits C&A Sport Skis. , , DIMENSIONS: Length x Diameter: 18" x 7/16" Stud Diameter x Length: 3/8" x 1-3/4" Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 3" 1st to 2nd: 3-3/4" 2nd to 3rd: 4" 3rd to 4th: 4" 4th to End: 3-1/4". C6H06
1 on Hand
More Info/Options for Bergstrom Type 2 Carbide Wear Rods 031823
|
|
|
|
$59.50
Bergstrom Type 2 Carbide Wear Rods 031747
Dennis Kirk Part #: 031747
Bergstrom Type 2 Carbide Wear Rods 031747: Manufacturer part # C6SLPL - Six inches of 1/8 in., 90º center control carbide mounted on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , NOTE: Fits C&A Sport Skis. , , DIMENSIONS: Length x Diameter: 18" x 7/16" Stud Diameter x Length: 3/8" x 1-3/4" Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 3" 1st to 2nd: 3-3/4" 2nd to 3rd: 4" 3rd to 4th: 4" 4th to End: 3-1/4". C6SLPL
2 on Hand
More Info/Options for Bergstrom Type 2 Carbide Wear Rods 031747
|
|
|
|
$59.50
Bergstrom Type 2 Carbide Wear Rods 031748
Dennis Kirk Part #: 031748
Bergstrom Type 2 Carbide Wear Rods 031748: Manufacturer part # C6SLPS - Six inches of 1/8 in., 90º center control carbide mounted on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , NOTE: Fits C&A Sport Skis. , , DIMENSIONS: Length x Diameter: 18" x 7/16" Stud Diameter x Length: 3/8" x 1-3/4" Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 3" 1st to 2nd: 3-3/4" 2nd to 3rd: 4" 3rd to 4th: 4" 4th to End: 3-1/4". C6SLPS
2 on Hand
More Info/Options for Bergstrom Type 2 Carbide Wear Rods 031748
|
|
|
|
|
|
|
|
$389.95
Aluminum/Black/Canister Muffler/4-Into-2-Into-1 Muffler Pipe Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve
Dennis Kirk Part #: 441074
Aluminum/Black/Canister Muffler/4-Into-2-Into-1 Muffler Pipe Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve: Manufacturer part # 14302 - Large diameter, smooth-bend headpipes for maximum exhaust flow with gloss black finish that dissipates heat and fights corrosion. Polished aluminum canister is lightweight with replaceable, re-packable baffle. Machined billet aluminum end cap is a Vance & Hines trademark; includes an adjustable tip of polished stainless steel. Three-piece design features quick-release, spring mounted canister and middle section. Standard Supersport baffle. This system is 4-2-1 design. Carburetor re-jetting is recommended for maximum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 14302
1 on Hand
More Info/Options for Aluminum/Black/Canister Muffler/4-Into-2-Into-1 Muffler Pipe Vance & Hines 4-into-2-into-1 Supersport Round Canister Exhaust System with Glossy Black Header and Polished Aluminum Muffler Sleeve
|
|
|
|
$214.99
4/110/14/2+5/Rear/Wheel - Aluminum/Each/7 ITP T7 14in. Bead Lock Polished Wheel
Dennis Kirk Part #: 554097
4/110/14/2+5/Rear/Wheel - Aluminum/Each/7 ITP T7 14in. Bead Lock Polished Wheel: All the benefits of beadlock design combined with the proven performance of the one-piece aluminum C-Series Type 7 wheel. Outer beadlock ring clamps the tire to the wheel, greatly reducing the chance of tire debeading while riding with low tire pressure or encountering heavy side loads; ring also adds further stability to an already durable wheel. Made using ITP's exclusive Advancecast process. Each wheel comes with a polished outer beadlock ring; replacement rings available separately choose from chrome (#554128), black (#554127), blue (#554126), red (#554125), polished (#554124). Lug nuts sold separately use #553772 and center caps sold separately use #552348..
Expected Soon
More Info/Options for 4/110/14/2+5/Rear/Wheel - Aluminum/Each/7 ITP T7 14in. Bead Lock Polished Wheel
|
|
![Bergstrom Type 2 Carbide Wear Rods/19.5" 4-Stud 031990](http://www.denniskirk.com/denniskirk/b2c/imagecenter/images/loading.gif "Bergstrom Type 2 Carbide Wear Rods/19.5" 4-Stud 031990")