CLOSEOUT!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods/22" 3-Stud C-K13
Manufacturer: Bergstrom
Dennis Kirk Part #: 031944
Bergstrom Type 1 Carbide Wear Rods/22" 3-Stud: Manufacturer part # C-K13 - Four inches of 1/8 in., 90 degree center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , DIMENSIONS: Length x Diameter: 22" x 7/16" Stud Diameter x Length: 5/16" x 5/8" Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 2-5/8" 1st to 2nd: 6-3/4" 2nd to 3rd: 6-7/8" 3rd to End: 5-1/4". C-K13 More than 10 on hand
CLEARANCE!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods/27" 4-Stud C-Q12
Manufacturer: Bergstrom
Dennis Kirk Part #: 032004
Bergstrom Type 1 Carbide Wear Rods/27" 4-Stud: Manufacturer part # C-Q12 - Four inches of 1/8 in., 90 degree center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , DIMENSIONS: Length x Diameter: 27" x 7/16" Stud Diameter x Length: 3/8" x 5/8" Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 3" 1st to 2nd: 7/8" 2nd to 3rd: 8.25" 3rd to 4th: 3-7/8" 4th to End: 4.75". C-Q12 3 on hand
CLEARANCE!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods/17.75" 3-Stud C-K21
Manufacturer: Bergstrom
Dennis Kirk Part #: 032008
Bergstrom Type 1 Carbide Wear Rods/17.75" 3-Stud: Manufacturer part # C-K21 - Four inches of 1/8 in., 90 degree center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , DIMENSIONS: Length x Diameter: 17-3/4" x 7/16" Stud Diameter x Length: 5/16"" x 1-1/2" Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 2-5/8" 1st to 2nd: 3-3/4" 2nd to 3rd: 8-3/4" 3rd to End: 2-5/8". C-K21 7 on hand
CLOSEOUT!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods/21" 4-Stud C-Q17
Manufacturer: Bergstrom
Dennis Kirk Part #: 031989
Bergstrom Type 1 Carbide Wear Rods/21" 4-Stud: Manufacturer part # C-Q17 - Four inches of 1/8 in., 90 degree center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. >, , DIMENSIONS: Length x Diameter: 21" x 7/16" Stud Diameter x Length: Two End Studs: 5/16" x 1-1/4" Two Center Studs: 5/16" x 1-3/4" Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 3-1/4" 1st to 2nd: 3-1/2" 2nd to 3rd: 7-1/8" 3rd to 4th: 3-1/2" 4th to End: 3-1/2". C-Q17 1 on hand
CLEARANCE!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods/20.5" 3-Stud CK10
Manufacturer: Bergstrom
Dennis Kirk Part #: 031735
Bergstrom Type 1 Carbide Wear Rods/20.5" 3-Stud: Manufacturer part # CK10 - Four inches of 1/8 in., 90º center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , DIMENSIONS: Length x Diameter: 20-1/2" x 7/16" Stud Diameter x Length: 3/8" x 3/4" Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 6-1/4" 1st to 2nd: 7" 2nd to 3rd: 5-1/2" 3rd to End: 2-1/4" , NOTE: Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. CK10 3 on hand
CLEARANCE!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods/17.25" 4-Stud CBLD
Manufacturer: Bergstrom
Dennis Kirk Part #: 031729
Bergstrom Type 1 Carbide Wear Rods/17.25" 4-Stud: Manufacturer part # CBLD - Four inches of 1/8 in., 90º center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts . DIMENSIONS . , Length X Diameter.........17 7/8 X 7/16". , Stud Diameter X Length..............7/16" X 1 3/4". , Number of Studs............4. STUD CENTER MOUNTING DISTANCE FROM: . , Front to 1ST....1 7/8". , 1ST to 2ND....3 1/8. , 2ND to 3RD....6 3/4". , 3RD to 4TH....4 5/8". , 4TH to END....1 5/8". , NOTE: Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. CBLD 4 on hand
CLEARANCE!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Carbide Wear Rods CC&AT
Manufacturer: Bergstrom
Dennis Kirk Part #: 031731
Bergstrom Type 1 Carbide Wear Rods: Manufacturer part # CC&AT - Four inches of 1/8 in., 90º center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , , Note: Fits C&A Sport Advantage Skis, , DIMENSIONS: Length x Diameter: 18" x 7/16" Diameter x Length: 3/8" x 1-3/4" Number of Studs: 4 Stud Center Mounting Distance From: Front to 1st: 3" 1st to 2nd: 3-3/4" 2nd to 3rd: 4" 3rd to 4th: 4" 4th to End: 3-1/4" , NOTE: Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. CC&AT 2 on hand
CLEARANCE!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Long Carbide Wear Rods - 18 in. Long CSLPL
Manufacturer: Bergstrom
Dennis Kirk Part #: 031733
Bergstrom Type 1 Long Carbide Wear Rods - 18 in. Long: Manufacturer part # CSLPL - Four inches of 1/8 in., 90º center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , NOTE: Fits SLP Skis, DIMENSIONS: Length x Diameter: 18" x 7/16" Stud Diameter x Length: First One: 3/8" x 1-3/4" Last Two: 3/8" x 2-1/4" Number of Studs: 3 Stud Center Mounting Distance From: Front to 1st: 4-1/2" 1st to 2nd: 3-1/2" 2nd to 3rd: 7" 3rd to End: 3" , NOTE: Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. CSLPL 3 on hand
CLEARANCE!
Was: $50.50
Now: $37.87
Bergstrom Type 1 Short Carbide Wear Rods - 13 in. Long CSLPS
Manufacturer: Bergstrom
Dennis Kirk Part #: 031734
Bergstrom Type 1 Short Carbide Wear Rods - 13 in. Long: Manufacturer part # CSLPS - Four inches of 1/8 in., 90º center control carbide on a 7/16 in. bar with hard surfacing on the full length of wear area. Center carbide is tapered at the front and rear. Super-hard carbide inserts are bonded to the host rod at critical pressure points to provide positive, precise steering control on all types of riding surfaces. Tapered carbide (front and rear) combined with hard-surfacing on the full length of the rods contact area gives you long lasting, durable performance. All studs are long enough to accept ski skins and include fastening nuts. , NOTE: Fits SLP Skis, DIMENSIONS: Length x Diameter: 13-1/8" x 7/16" Stud Diameter x Length: 7/16" x 2-1/4" Number of Studs: 2 Stud Center Mounting Distance From: Front to 1st: 3" 1st to 2nd: 7" 2nd to 3rd: 3-1/8" , NOTE: Some models require drilling extra holes in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs with a wire brush.. CSLPS 2 on hand
$207.99Wild 1 Inc. Chubby 12 1/2 in. Ape Hanger Bar WO502
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595063
Wild 1 Inc. Chubby 12 1/2 in. Ape Hanger Bar: Manufacturer part # WO502 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Work with stock and most custom controls, stock risers and top clamps. Not dimpled. Made in the U.S.A... WO502 Expected Soon
$201.99Wild 1 Inc. 1 1/4 in. Psycho Chubby 10 in. Chopper T-Bars p595801
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595801
Wild 1 Inc. 1 1/4 in. Psycho Chubby 10 in. Chopper T-Bars: Manufacturer part # p595801 - Handlebars are 25 percent thicker than stock. Designed with fluid bends at precise angles for maximum comfort and control. Pre-drilled for internal wiring. Polished welds and diamond knurled with a show-chrome finish. Work with stock cables, brake line and wiring on most metric cruisers. Made in the U.S.A.. Note: All part numbers (except 595669, 595670 and 595671) require Wild 1 Metric conversion risers PART #595672 and top clamp for installation on metric bikes with 100mm on-center risers.. p595801 2 on hand
$192.99Wild 1 Inc. 1 1/4 in. Knuckle Handlebars p595789
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595789
Wild 1 Inc. 1 1/4 in. Knuckle Handlebars: Manufacturer part # p595789 - Handlebars are 25 percent thicker than stock. Designed with fluid bends at precise angles for maximum comfort and control. Pre-drilled for internal wiring. Polished welds and diamond knurled with a show-chrome finish. Work with stock cables, brake line and wiring on most metric cruisers. Made in the U.S.A.. Note: All part numbers (except 595669, 595670 and 595671) require Wild 1 Metric conversion risers PART #595672 and top clamp for installation on metric bikes with 100mm on-center risers.. p595789 2 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
