Turn Down

$575.99 Jardine Chrome 4-into-2 Turn-Down Exhaust System 14-1504-01
Manufacturer: Jardine
Dennis Kirk Part #: 25171
Jardine Chrome 4-into-2 Turn-Down Exhaust System: Manufacturer part # 14-1504-01 - High-velocity design for smoothness. 4-into-2 exhaust system improves throttle response and mid-range performance. Dual nickel/chrome-plated construction Baffles are non-removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 14-1504-01
1 on hand

More Info/Options for Jardine Chrome 4-into-2 Turn-Down Exhaust System 14-1504-01

Turn Down

$436.99 Samson Silver Bullet 30 in. Turn-Down Mufflers M-123
Manufacturer: Samson
Dennis Kirk Part #: H251431
Samson Silver Bullet 30 in. Turn-Down Mufflers: Manufacturer part # M-123 - One-piece, 3 in. diameter mufflers feature free flowing, low restriction, non-removable baffles, high quality chrome plating and heavy-duty slotted channel brackets. Necessary hardware included. Sold in pairs. Made in the U.S.A., INCLUDED ITEMS: , (1) Right Muffler, (1) Left Muffler, (4) 5/16 in. Nyloc Nuts, (4) 5/16 in. x 3/4 in. Carriage Bolts, (4) 5/16 in. Washers, (4) 7/16 in. Black Spacers. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models (except 08 Touring models). M-123
Expected Soon

More Info/Options for Samson Silver Bullet 30 in. Turn-Down Mufflers M-123

Turn Down

$427.99 Vance & Hines Straight-Cut Slip-Ons with Turn-Down End Caps 16723
Manufacturer: Vance & Hines
Dennis Kirk Part #: H44104
Vance & Hines Straight-Cut Slip-Ons with Turn-Down End Caps: Manufacturer part # 16723 - Classic slip-ons provide substantial power increases, improved fuel economy and crisper throttle response. Each of these high-volume, 4 in. diameter slip-ons also provides the perfect sound from your Big Twin; not too loud, definitely not too quiet; baffles are removable. Includes round, solid billet aluminum end caps -- precision CNC-machined, then highly polished and double nickel chrome-plated. All necessary hardware and mounting instructions are included for a hassle free, perfect fit. Designed and manufactured in the U.S.A. by Vance & Hines. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing.See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 16723
4 on hand

More Info/Options for Vance & Hines Straight-Cut Slip-Ons with Turn-Down End Caps 16723

Turn Down

$184.99 Cycle Shack Slip-On Turn-Down Replacement Mufflers MHD139 TD
Manufacturer: Cycle Shack
Dennis Kirk Part #: 449975
Cycle Shack Slip-On Turn-Down Replacement Mufflers: Manufacturer part # MHD139 TD - Feature an all-steel core that will not burn out. Show-chrome quality will last for years. Mufflers use stock mounts. 2-1/2 in. diameter. Sold in pairs. NOTE: The baffles in these mufflers are not removable , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See Chemicals and Lubrication section for products that will help prevent or remove blueing. MHD139 TD
1 on hand

More Info/Options for Cycle Shack Slip-On Turn-Down Replacement Mufflers MHD139 TD

Turn Down

$69.99 Powertye Retractor-2 Tie Downs w/Secure Hooks 37022
Manufacturer: Powertye
Dennis Kirk Part #: 407600
Powertye Retractor-2 Tie Downs w/Secure Hooks: Manufacturer part # 37022 - Automatic retracting strap allows for easy setup and removal. Ratchet allows for precision tension control. Available with S-hooks - 407599 or secure hooks that ensure a solid fitting no matter what the conditions. Attached "secure hook" carabiner design provides additional security, or use the built-in bolt mount to permanently secure the tie-down to the walls or floor of a trailer. 2 in. W black webbing. 6 ft.L. Assembly rated to 3,000 lb.. Sold in pairs.. 37022
3 on hand

More Info/Options for Powertye Retractor-2 Tie Downs w/Secure Hooks 37022

Turn Down

$17.95 Parts Unlimited Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist 39200071
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 407477
Parts Unlimited Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist: Manufacturer part # 39200071 - 1" nylon web strap, 66" long heavy-duty with built-in assist. Rated at more than 1,200 lb. straight pull strength. Cam action buckle and two vinyl-coated 3/8" hooks. Easy operation with maximum holding power. Sold in pairs.. 39200071
More than 10 on hand

More Info/Options for Parts Unlimited Heavy-Duty Cam Buckle Tie-Downs with Built-In Assist 39200071

Turn Down

$29.95 Moose Heavy Duty 1 in. Ratcheting Tie-Downs MD101
Manufacturer: Moose
Dennis Kirk Part #: 40788
Moose Heavy Duty 1 in. Ratcheting Tie-Downs: Manufacturer part # MD101 - Top quality tiedowns that feature Moose logo. 54 in. long, 1 in. wide with two oversize rubber coated, high-strength hooks. Sold in pairs.. MD101
6 on hand

More Info/Options for Moose Heavy Duty 1 in. Ratcheting Tie-Downs MD101

Turn Down

$16.95 Parts Unlimited Heavy-Duty Ratcheting Tie-Downs with Built-In Assist 39200074
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 407480
Parts Unlimited Heavy-Duty Ratcheting Tie-Downs with Built-In Assist: Manufacturer part # 39200074 - 1" nylon web strap, 6' long with built-in assist. Rated at more than 1,200 lb. straight pull strength. Ratchet for easy cinching. Two vinyl-coated 3/8" hooks. Sold each.. 39200074
More than 10 on hand

More Info/Options for Parts Unlimited Heavy-Duty Ratcheting Tie-Downs with Built-In Assist 39200074

Turn Down

$24.99 Ancra Tie-Downs 40888-28
Manufacturer: Ancra
Dennis Kirk Part #: 4024
Ancra Tie-Downs: Manufacturer part # 40888-28 - These 66 in. tie-downs are made of quality 1 in. aircraft nylon straps. Pull-strength tested at 1200-lb. (2400-lb. looped). 400-lb. working load. Cam lock buckles feature a pressure plate. S-hooks are vinyl-coated. Sold in pairs.. 40888-28
3 on hand

More Info/Options for Ancra Tie-Downs 40888-28

Turn Down

$18.99 Powertye 1 in. Soft-Tye Tie-Downs with Secure Hook 23622S
Manufacturer: Powertye
Dennis Kirk Part #: 407196
Powertye 1 in. Soft-Tye Tie-Downs with Secure Hook: Manufacturer part # 23622S - Feature sewn-in soft-tye and locking safety secure hooks. Super-tough 4,500 lb. test nylon webbing. PowerTye EZ release, non-slipping teardrop buckle and 3/8" vinyl-coated hooks. 1,200 lb. assembly strength. 5 1/2' length plus Soft-Tye. Cinch loops for easy pulling. Double security stitching. Sold in pairs.. 23622S
5 on hand

More Info/Options for Powertye 1 in. Soft-Tye Tie-Downs with Secure Hook 23622S

Turn Down

$21.95 Parts Unlimited Heavy-Duty Cam Buckle Ratcheting Tie-Downs w/Built-in Assist 17021000
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 406793
Parts Unlimited Heavy-Duty Cam Buckle Ratcheting Tie-Downs w/Built-in Assist: Manufacturer part # 17021000 - 1 1/2 in. x 6 ft with built-in assist. Webbing strap rated at 5000-lb straight pull strength. Tighten ratchet-style for easy cinching rated at 1200 lbs straight pull strength. Sold each.. 17021000
8 on hand

More Info/Options for Parts Unlimited Heavy-Duty Cam Buckle Ratcheting Tie-Downs w/Built-in Assist 17021000

Turn Down

$4.95 Parts Unlimited Tie Down Extensions 130001
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 40753
Parts Unlimited Tie Down Extensions: Manufacturer part # 130001 - May be used as soft ties between bike and tie-down hooks to protect handlebars, finishes, etc., or simply to extend reach of the tie-down. Top quality 1 in. nylon web construction. Eighteen inch overall length with loops at both ends. Sold in pairs.. 130001
More than 10 on hand

More Info/Options for Parts Unlimited Tie Down Extensions 130001

Turn Down

Turn Down