Track Ii

$569.99 Kimpex .875 Lug Vantage II Track 0494887
Manufacturer: Kimpex
Dennis Kirk Part #: 01399
Kimpex .875 Lug Vantage II Track: Manufacturer part # 0494887 - Designed for the snowmobiler who wants the safety and traction of a studded track, but is uncomfortable with drilling or burning holes for studding. Nylon reinforced construction for years or flexibility and durability (no Kelvar). Oversized clip holes for improved lubrication and longer life of suspension slides. Height measures .875 in.. IMPORTANT NOTES: All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulkhead as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1.2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height than the original. Measure your old one first to be sure.. 0494887
7 on hand

More Info/Options for Kimpex .875 Lug Vantage II Track 0494887

Track Ii

$10.99 Woodys Track Cutter 1/4 in. DRIL-1/4
Manufacturer: Woodys
Dennis Kirk Part #: 28491
Woodys Track Cutter 1/4 in.: Manufacturer part # DRIL-1/4 - Stud pattern drilling made quick and easy. Use for all types of studs; cuts a fabulous clean hole.. DRIL-1/4
More than 10 on hand

More Info/Options for Woodys Track Cutter 1/4 in. DRIL-1/4

Track Ii

$10.99 Woodys Track Cutter 7 mm DRIL-7MM
Manufacturer: Woodys
Dennis Kirk Part #: 28492
Woodys Track Cutter 7 mm: Manufacturer part # DRIL-7MM - Stud pattern drilling made quick and easy. Use for all types of studs; cuts a fabulous clean hole.. DRIL-7MM
More than 10 on hand

More Info/Options for Woodys Track Cutter 7 mm DRIL-7MM

Track Ii

$7.99 Woodys Track Marker TRAK-MARK
Manufacturer: Woodys
Dennis Kirk Part #: 28886
Woodys Track Marker: Manufacturer part # TRAK-MARK - Use the track marker to layout any stud pattern. White dots from marker make hole placement much easier to see when drilling.. TRAK-MARK
More than 10 on hand

More Info/Options for Woodys Track Marker TRAK-MARK

Track Ii

$13.99 Sno-Stuff Track Cutter Tool 725-016
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 28495
Sno-Stuff Track Cutter Tool: Manufacturer part # 725-016 - Allows you to make a clean cut hole through rubber tracks for installing studs. Available for 5/16 in. stud thread size. Can be used either by hand or with an electric drill. Resharpenable.. 725-016
More than 10 on hand

More Info/Options for Sno-Stuff Track Cutter Tool 725-016

Track Ii

$68.95 Parts Unlimited Track Clip Tool 16040001
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 282087
Parts Unlimited Track Clip Tool: Manufacturer part # 16040001 - Perfect for installing many types of track clips. Kit comes complete with one 5/16 in.-11 x 6 in. screw, one pressure plate, two washers, two 1/2 in.-20 x 6 in. hexagonal screws and one #1 bending block for large clips. Also includes on #2 bending block for narrow clips, one male block and two hexagonal screws. Works on Camoplast and many other track clips except full-block style tracks (those with rubber accross the top of the clips). Will not work on all Camoplast tracks or the following Kimpex tracks:, X-Force, X-Trail 00-004 Series, Ultimat Traxtion, Tomahawk, Xcavator.. 16040001
More than 10 on hand

More Info/Options for Parts Unlimited Track Clip Tool 16040001

Track Ii

$79.95 Fast-Trac Track Clip Tool Y01
Manufacturer: Fast-Trac
Dennis Kirk Part #: 2805
Fast-Trac Track Clip Tool: Manufacturer part # Y01 - Replace track clips and clip-on slider guides the easy way with our track clip tool. Hardened steel for extended service life. Replaces clips on Yokohama involute drive and most other rubber tracks that use clips (minimum drive hole width of 1 1/2"). Threads of bolt must be lubricated prior to use. These bolts have a tendancy to be tight and hard to turn when new. , Not for use with Camoplast Tracks.. Y01
More than 10 on hand

More Info/Options for Fast-Trac Track Clip Tool Y01

Track Ii

$49.99 Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Stud 153C24
Manufacturer: Fast-Trac
Dennis Kirk Part #: 08611
Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Stud: Manufacturer part # 153C24 - The next level in performance and toughness for your machine. Large 1 in. head prevents pull-through. Studs feature a 5/16 in. shank with an 80 degree carbide point. 24 packs include nuts and backer plates.. 153C24
5 on hand

More Info/Options for Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Stud 153C24

Track Ii

$50.99 Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Studs 155C24
Manufacturer: Fast-Trac
Dennis Kirk Part #: 08615
Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Studs: Manufacturer part # 155C24 - The next level in performance and toughness for your machine. Large 1" head prevents pull-through. Made with high-grade stainless steel for exceptional wear and strength. Studs feature a 5/16" shank with an 80 degree carbide point. 24-packs include nuts and backer plates.. 155C24
2 on hand

More Info/Options for Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Studs 155C24

Track Ii

$91.99 Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Stud 157B48
Manufacturer: Fast-Trac
Dennis Kirk Part #: 080259
Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Stud: Manufacturer part # 157B48 - The next level in performance and toughness for your machine. Large 1" head prevents pull-through. Made with high-grade stainless steel for exceptional wear and strength. Studs feature a 5/16" shank with an 80 degree carbide point. Does not include nuts and backer plates.. 157B48
1 on hand

More Info/Options for Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Stud 157B48

Track Ii

$49.99 Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Studs 154C24
Manufacturer: Fast-Trac
Dennis Kirk Part #: 08613
Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Studs: Manufacturer part # 154C24 - The next level in performance and toughness for your machine. Large 1" head prevents pull-through. Made with high-grade stainless steel for exceptional wear and strength. Studs feature a 5/16" shank with an 80 degree carbide point. 24-packs include nuts and backer plates.. 154C24
1 on hand

More Info/Options for Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Studs 154C24

Track Ii

$54.99 Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Stud 156C24
Manufacturer: Fast-Trac
Dennis Kirk Part #: 08617
Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Stud: Manufacturer part # 156C24 - The next level in performance and toughness for your machine. Large 1" head prevents pull-through. Made with high-grade stainless steel for exceptional wear and strength. Studs feature a 5/16" shank with an 80 degree carbide point. 24-packs include nuts and backer plates; 48 and 144-packs do not.. 156C24
1 on hand

More Info/Options for Fast-Trac Top Gun II Carbide Push-Through Stainless Trail Stud 156C24

Track Ii

Track Ii