$10.99Woodys Track Cutter 1/4 in. DRIL-1/4
Manufacturer: Woodys
Dennis Kirk Part #: 28491
Woodys Track Cutter 1/4 in.: Manufacturer part # DRIL-1/4 - Stud pattern drilling made quick and easy. Use for all types of studs; cuts a fabulous clean hole.. DRIL-1/4 More than 10 on hand
$10.99Woodys Track Cutter 7 mm DRIL-7MM
Manufacturer: Woodys
Dennis Kirk Part #: 28492
Woodys Track Cutter 7 mm: Manufacturer part # DRIL-7MM - Stud pattern drilling made quick and easy. Use for all types of studs; cuts a fabulous clean hole.. DRIL-7MM More than 10 on hand
$7.99Woodys Track Marker TRAK-MARK
Manufacturer: Woodys
Dennis Kirk Part #: 28886
Woodys Track Marker: Manufacturer part # TRAK-MARK - Use the track marker to layout any stud pattern. White dots from marker make hole placement much easier to see when drilling.. TRAK-MARK More than 10 on hand
$13.99Sno-Stuff Track Cutter Tool 725-016
Manufacturer: Sno-Stuff
Dennis Kirk Part #: 28495
Sno-Stuff Track Cutter Tool: Manufacturer part # 725-016 - Allows you to make a clean cut hole through rubber tracks for installing studs. Available for 5/16 in. stud thread size. Can be used either by hand or with an electric drill. Resharpenable.. 725-016 More than 10 on hand
$68.95Parts Unlimited Track Clip Tool 16040001
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 282087
Parts Unlimited Track Clip Tool: Manufacturer part # 16040001 - Perfect for installing many types of track clips. Kit comes complete with one 5/16 in.-11 x 6 in. screw, one pressure plate, two washers, two 1/2 in.-20 x 6 in. hexagonal screws and one #1 bending block for large clips. Also includes on #2 bending block for narrow clips, one male block and two hexagonal screws. Works on Camoplast and many other track clips except full-block style tracks (those with rubber accross the top of the clips). Will not work on all Camoplast tracks or the following Kimpex tracks:, X-Force, X-Trail 00-004 Series, Ultimat Traxtion, Tomahawk, Xcavator.. 16040001 More than 10 on hand
$79.95Fast-Trac Track Clip Tool Y01
Manufacturer: Fast-Trac
Dennis Kirk Part #: 2805
Fast-Trac Track Clip Tool: Manufacturer part # Y01 - Replace track clips and clip-on slider guides the easy way with our track clip tool. Hardened steel for extended service life. Replaces clips on Yokohama involute drive and most other rubber tracks that use clips (minimum drive hole width of 1 1/2"). Threads of bolt must be lubricated prior to use. These bolts have a tendancy to be tight and hard to turn when new. , Not for use with Camoplast Tracks.. Y01 More than 10 on hand
$526.99Kimpex Durado (Standard) Track .5 in. Lug 04730
Manufacturer: Kimpex
Dennis Kirk Part #: 01385
Kimpex Durado (Standard) Track .5 in. Lug: Manufacturer part # 04730 - Dennis Kirk has the largest stock and the biggest variety of high-quality standard replacement tracks for most snowmobile brands. Made with special cold-weather rubber compounds. High-quality nylon, fiberglass, polyurethane and Kevlar components (Kevlar reinforced tracks are noted in the price list). Heat-treated steel cleats, clips and slider guides. Cleats fastened with steel rivets. All tracks are exact OEM replacements, with a few exceptions (noted in chart). One year warranty. NOTE: 1. Kimpex Durado track 2. Original equipment manufacturer track 3. Kevlar reinforced IMPORTANT NOTE: Before ordering, check the height of your track lugs and order the matching height listed for your machine. Whenever ordering an optional taller-lug track, you must check for bulkhead, tunnel and heat exchanger clearance. The applications listed is for the track to fit the suspension and be the same length as original equipment only - it is your responsibility to ensure there is sufficient clearance.. 04730 4 on hand
$639.99Kimpex Tomahawk Track 1.10 in. Lug Height 04654
Manufacturer: Kimpex
Dennis Kirk Part #: 01384
Kimpex Tomahawk Track 1.10 in. Lug Height: Manufacturer part # 04654 - New, innovative tracks from Kimpex are the lightest and fastest in their class. Superb traction and design. 15 in. x 136 in./ 2.52 pitch - no sprocket changes neccessary. 140 pre-molded 5/16 in. stud holes. IMPORTANT NOTE: Before ordering, check the height of your track lugs and order the matching height listed for your machine. Whenever ordering an optional taller-lug track, you must check for bulkhead, tunnel and heat exchanger clearance. The applications listed is for the track to fit the suspension and be the same length as original equipment only - it is your responsibility to ensure there is sufficient clearance. noted.. 04654 1 on hand
$13.99Kimpex Track Clip/ Narrow Hole Slide Clip with Turndown Guide 04-150
Manufacturer: Kimpex
Dennis Kirk Part #: 0809
Kimpex Track Clip/ Narrow Hole Slide Clip with Turndown Guide: Manufacturer part # 04-150 - Clips and guides fit original equipment tracks and aftermarket tracks sold by Dennis Kirk. See our Tool section for track clip installation tools. Sold in bags of 10. Replaces Moto-Ski and Ski-Doo OEM# 500-0031-00. , FITS TRACK PART NUMBERS:, , 0107, 0108 and 01117, , Note that in the descriptions narrow holes are approximately 1 inch wide or less, wide hole are approximately 1 1/2 inch wide. , , Dimensions:. , (A) 1 3/4". , (B) 3/4". , (C) 3/4".. 04-150 More than 10 on hand
$10.99Kimpex Track Clip without Guide/ Wide Hole Slide Clip 04-149-04
Manufacturer: Kimpex
Dennis Kirk Part #: 0805
Kimpex Track Clip without Guide/ Wide Hole Slide Clip: Manufacturer part # 04-149-04 - Clips and guides fit original equipment tracks and aftermarket tracks sold by Dennis Kirk. See our Tool section for track clip installation tools. Sold in bags of 10. , FITS TRACK PART NUMBERS:, , 0102, 0104, 0105, 0106, 0138, 0155, 0156 and 0157, , Note that in the descriptions narrow holes are approximately 1 inch wide or less, wide hole are approximately 1 1/2 inch wide. , , Replaces Ski-Doo OEM# 500-0032-00. , , Dimensions:. , (A) 2". , (B) 1 1/2". , (C) 3/4".. 04-149-04 More than 10 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
