$151.99Custom Chrome Fat Bob Screw Top Gas Tank 15296
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18023
Custom Chrome Fat Bob Screw Top Gas Tank: Manufacturer part # 15296 - Available in either 3.5 or 5.0 gallon version. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for trouble-free service. Both tanks accept both the dash for Low Rider models and the large speedo dash for FXWG models. Made with the 83-00 screw-on type filler necks to allow use of the widest range of gas cap designs. 13/16 in. external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Unpainted steel. Replaces OEM numbers 61213-83, 61229-83, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15296 2 on hand
$151.99Custom Chrome Fat Bob Screw Top Gas Tank 15295
Manufacturer: Custom Chrome
Dennis Kirk Part #: H18022
Custom Chrome Fat Bob Screw Top Gas Tank: Manufacturer part # 15295 - Available in either 3.5 or 5.0 gallon version. Designed with accurate, precision-placed mounting plates and stud bosses for easy installation on Big Twin 4-speed frames through 84 (except FXST). Assembled using low-temp welding procedures throughout for trouble-free service. Both tanks accept both the dash for Low Rider models and the large speedo dash for FXWG models. Made with the 83-00 screw-on type filler necks to allow use of the widest range of gas cap designs. 13/16 in. external-thread fuel valve connections for OE-style gas valves or high-volume fuel valves. Unpainted steel. Replaces OEM numbers 61219-83, 61425-83, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 15295 2 on hand
$349.95Drag Specialties One-Piece Smooth-Top Extended Gas Tank with Single Screw-In Cap 011675BX40
Manufacturer: Drag Specialties
Dennis Kirk Part #: H18531
Drag Specialties One-Piece Smooth-Top Extended Gas Tank with Single Screw-In Cap: Manufacturer part # 011675BX40 - Smooth-Top tank has no dummy extension, 4.2 gallon, dash-style tank is fully functional. Area cut out for the nose of the stock seat. Tank has an arched bottom for that great banana look. Smooth-top tank eliminates the dash completely and will require custom mounting of ignition switch, dash lights and speedometer. Tank measures 22 in. L by 16 in. W. Single screw-in cap is not included and must be purchased separately (use 82-E96 style caps). All necessary hardware included. , NOTE: 96-99 models require the use of pre-96 petcock, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011675BX40 Expected Soon
$381.95Drag Specialties Extended Smooth-Top QuickBob Rubber Mount Gas Tank-Twin Cap Style 11583BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H182025
Drag Specialties Extended Smooth-Top QuickBob Rubber Mount Gas Tank-Twin Cap Style: Manufacturer part # 11583BX46 - Twin cap style gas tank. Tank is 2 in. longer than a standard QuickBob tank. Dual gas cap style. Features rear cutout for seat nose (some seats may need to be shortened). Features screw-in bungs (use 82-E96 screw-in style caps) and reuires ignition kit Part no. H18379 (sold separately). 3.9 gallon capacity. All necessary mounting brackets included. Utilizes a 22mm petcock NOTE: When gas tanks are installed on 96 and later models and the OEM continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of the screw-type vented caps, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 11583BX46 2 on hand
$381.95Drag Specialties Extended Smooth-Top QuickBob Rubber Mount Gas Tank-Single Cap Style 11586BX46
Manufacturer: Drag Specialties
Dennis Kirk Part #: H182026
Drag Specialties Extended Smooth-Top QuickBob Rubber Mount Gas Tank-Single Cap Style: Manufacturer part # 11586BX46 - Single cap style gas tank. Tank is 2 in. longer than a standard QuickBob tank. Features rear cutout for seat nose (some seats may need to be shortened). Features screw-in bungs (use 82-E96 style screw-in style caps) and requires ignition relcation kit Part no. H18379 (sold separately). 3.9 gallon capacity. All necessary mounting brackets included. Utilizes a 22mm petcock NOTE: When gas tanks are installed on 96 and later models and the OEM continuous venting system is eliminated or disconnected, you may not reuse your stock vented cap, but may replace it with an earlier version of the screw-type vented caps, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 11586BX46 1 on hand
CLEARANCE!
Was: $878.99
Now: $659.24
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 07010112
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 182959
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank: Manufacturer part # 07010112 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Long, curved bottom, 27 in. L. Must use a L96-05 vented gas cap and 22mm petcock. Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 07010112 1 on hand
CLEARANCE!
Was: $878.99
Now: $659.24
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank 07010111
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 182958
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tank: Manufacturer part # 07010111 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Medium, curved bottom, 25 1/4 in. L. Must use a L96-05 vented gas cap and 22mm petcock (sold separately). Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 07010111 1 on hand
CLEARANCE!
Was: $881.99
Now: $661.49
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tan 07010113
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 182960
Russ Wernimont Designs Smooth-Top Chopper-Style Indented Gas Tan: Manufacturer part # 07010113 - Custom tanks for custom builders. One-piece, single-cap design. Designed from 14- and 16-gauge steel. Long, flat bottom. Must use a L96-05 vented gas cap and 22mm petcock. Required mount kits may be used on any custom application. , , NOTE: Not for use on fuel-injected models. , , NOTE: FXSTD models require the use of a custom seat, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 07010113 2 on hand
$251.99NYC Custom Motorcycle Flip-Top w/Fuel Saver Gas Cap p183618
Manufacturer: NYC Custom Motorcycle
Dennis Kirk Part #: 183618
NYC Custom Motorcycle Flip-Top w/Fuel Saver Gas Cap: Manufacturer part # p183618 - Aluminum vented gas caps. Include weld-in steel bung. For custom applications only. Sold each. Made in the U.S.A... p183618 1 on hand
$342.99Matt Hotch Designs EPA Star Gas Cap with Bung p183190
Manufacturer: Matt Hotch Designs
Dennis Kirk Part #: 183191
Matt Hotch Designs EPA Star Gas Cap with Bung: Manufacturer part # p183190 - The coolest flush-mount gas caps available. Feature pop-up stainless steel vented caps that can be polished or painted. Replacement caps and bung are available separately. Replacement caps also fit independent gas tanks that use Matt Hotch pop-up caps. Made in the U.S.A., , NOTE: EPA compliant caps quard against spillage in rollover and meet NHTSA standards.. p183190 1 on hand
$275.99Matt Hotch Designs EPA Flush Gas Cap with Bung p183186
Manufacturer: Matt Hotch Designs
Dennis Kirk Part #: 183186
Matt Hotch Designs EPA Flush Gas Cap with Bung: Manufacturer part # p183186 - The coolest flush-mount gas caps available. Feature pop-up stainless steel vented caps that can be polished or painted. Replacement caps and bung are available separately. Replacement caps also fit independent gas tanks that use Matt Hotch pop-up caps. Made in the U.S.A., , NOTE: EPA compliant caps quard against spillage in rollover and meet NHTSA standards.. p183186 1 on hand
$1115.99Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide 07010189
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183331
Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide: Manufacturer part # 07010189 - 6-gallon one-piece tanks are 1 1/2 in. wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (454539) and Profile (454538) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , NOTE: This item ships 3 or 4 days after the order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010189 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
