$2.99DID 428 NZ Off Road Clip Connecting Link p112422
Manufacturer: DID
Dennis Kirk Part #: 112422
DID 428 NZ Off Road Clip Connecting Link: Manufacturer part # p112422 - Replacement connecting link for 428NZ chains.. p112422 2 on hand
$59.99DID 428 NZ Off Road Series Drive Chain p112418130
Manufacturer: DID
Dennis Kirk Part #: 112418130
DID 428 NZ Off Road Series Drive Chain: Manufacturer part # p112418130 - DAI-HARD (DHA) SERIES NON-O-RING CHAIN (NZ) D.I.D.'s professional high-performance non-O-ring chain. DHA pin treatment: hard chromium-carbide layer formed on pin surface. Far better wear-resistance than other chains. Up to 19 percent higher tensile strength. Increased anti-oxidation performance. Solid bushings, quad-riveted pins. , Includes a Clip Type Master Link , , Replacement connecting link:, Clip-Type: part no. 11-2424.. p112418130 2 on hand
$27.95SBS LF Off-Road Ceramic Brake Pads p199777
Manufacturer: SBS
Dennis Kirk Part #: 199777
SBS LF Off-Road Ceramic Brake Pads: Manufacturer part # p199777 - Parts Unlimited brake pads by SBS offer asbestos-free brakes using patented Unified Composite Technology to create tomorrow's advanced brake systems for today's motorcycles. UCT technology completely blends all brake pad materials into a balanced, unified pad. This balance ensures no hot spots, glazing, premature fading or excessive rotor wear. The result is powerful, fade-free braking performance -- even in extreme conditions. , OFF-ROAD CERAMIC, Designed to perform flawlessly on off-road bikes not factory-equipped with sintered metal pads. LF rears deliver ultimate stopping power in all riding conditions. As with all SBS compounds, Off-Road Ceramic is formulated using a UCT blending process from organic, asbestos-free compounds to provide excellent stopping power and pad longevity. Tested and approved in compliance with strict European regulations. Off-Road Ceramic pads can replace sintered pads; however, Off-Road Sintered pads are highly recommended. , NOTE: All brake pads and shoes are sold in a set for one disc or drum. Order one set for each disc or drum on your machine, NOTE: Never use sintered metal or RSI-type brake pads in bikes originally equipped with non-sintered pads. Check your owner's manual to see if sintered metal brakes were original equipment on your machine.. p199777 1 on hand
$70.99Renthal Off-Road Handlebar 81601SI01185
Manufacturer: Renthal
Dennis Kirk Part #: 595484
Renthal Off-Road Handlebar: Manufacturer part # 81601SI01185 - World-famous Renthal handlebars have claimed more World Championships and U.S. MX titles than all other handlebars combined. Exclusive aerospace aluminum alloy is precisely engineered for the best combination of strength and fatigue reduction. Oversize tube is machined down to 7/8 in. to ensure a perfect diameter and prevent the handlebar from slipping in the clamps. Shot-peened finish for improved fatigue life. Laser-marked positioning grid. An exclusive copyrighted lightweight clamping system for the cross brace; bolted and bonded to increase strength. Dual-anodized finish.. 81601SI01185 Expected Soon
$66.99DID 415 ER Off Road Series Drive Chain p11983120
Manufacturer: DID
Dennis Kirk Part #: 11983120
DID 415 ER Off Road Series Drive Chain: Manufacturer part # p11983120 - Mx series offroad series chain(ER, ERT, MX, NZ). MX Series chain developed for motocross with Team Johnson Suzuki Bieffe in Europe; features 20 percent higher fatigue strength, 11 percent higher tensile strength, 13 percent stronger anti-tight joint performance, 17 percent higher roller impact strength and 20 percent longer wear resistance. ER chain used by top motocross/supercross OEM works teams. ERT chain designed for motocross. Each is high-performance, lightweight, low-friction chain designed exclusively for racing. Provides the highest wear resistance, tensile strength and impact resistance available. ERV2 designed for endurance road racing with special low-friction O-rings. Distinctive gold-plated finish.. , Includes a Clip Type Master Link , , Replacement connecting link:, Clip-Type: part no. 110291. p11983120 1 on hand
CLEARANCE!
Was: $180.99
Now: $72.40
N-Style 06 Suzuki Off-Road Team Graphics Kit N404171
Manufacturer: N-Style
Dennis Kirk Part #: 529176
N-Style 06 Suzuki Off-Road Team Graphics Kit: Manufacturer part # N404171 - N-Style provides a complete graphics makeover in one package that includes matching tank/shroud graphics and seat covers. Kits contain Ultra seat covers which feature printed plastic sides and an embossed pattern for extra grip. Yamaha of Troy replica kits available for Yamaha YZ80-YZ426F; kits also include shroud, swingarm, fork, frame and front and rear fender decals. Suzuki Amateur replica kits available for Suzuki RM250-125; kits also include shroud, swingarm, fork, and front and rear fender decals. Honda of Troy/Factory Connection kits include front and rear fender decals. Kawasaki Pro Circuit kits include front and rear fender decals. Ultra-thick 24-mil vinyl graphics with subsurface printing eliminate fading and rub-off. , , NOTE: For proper adhesion, use only soap and water to wash surface where decal/sticker is to be applied.. N404171 1 on hand
$43.99K & S Off-Road Handlebar Switch 12-0055
Manufacturer: K & S
Dennis Kirk Part #: 212584
K & S Off-Road Handlebar Switch: Manufacturer part # 12-0055 - Handlebar switch that features headlight on/off, horn and kill functions. Wires measure 21 1/2in.. Switch measures 28.5mm (1.12in.) width. Extra terminals are included. For 7/8in. bars.. 12-0055 5 on hand
$755.99Yoshimura RS-3D Dual Oval Off-Road Exhaust System 2360710
Manufacturer: Yoshimura
Dennis Kirk Part #: 433367
Yoshimura RS-3D Dual Oval Off-Road Exhaust System: Manufacturer part # 2360710 - Features a high-flow stainless steel header for maximum performance. Hit with authority and give the precise throttle response for racers. High-strength billet mount brackets. Insulated springs hold the slip-mount mufflers in place and ease muffler repacking. Features the legendary Yoshimura fit and finish. Stainless steel muffler sleeve. Meet 2007 sound regulations (96 dB) for AMA off-road competition sound limit regulations. Included Items: , (1) Stainless Steel Right Tailpipe, (1) Stainless Steel Left Tailpipe, (1) Left Side Muffler, (1) Right Side Muffler, (4) Medium Exhaust Springs, (2) 8mm x 35mm Bolt, (4) 8mm Large Washers, (2) Aluminum Spacer, (4) 8mm Nut, (2) Small Exhaust Springs, (2) Rubber Grommet for Muffler Brackets, (2) 8mm x 25mm Bolt, (1) Spring Puller Tool, (1) Left Muffler Mount Bracket, (1) Right Muffler Mount Bracket, (1) Stock Heatshield Hole Drilling Template, (2) Yoshimura Vinyl Sticker. 2360710 1 on hand
$649.99Eddie Trottas Thunder Design Thunder D-Seat Oil Tank TC-283
Manufacturer: Eddie Trottas Thunder Design
Dennis Kirk Part #: 493925
Eddie Trottas Thunder Design Thunder D-Seat Oil Tank: Manufacturer part # TC-283 - Oil tank for Softail-style batteries. Includes threaded cap, , NOTE: Fits Thunder Cycle ST300 frames only.. TC-283 1 on hand
$28.99Motorbooks International Pro Motocross And Off-Road Riding Technique-Third Edition 137409
Manufacturer: Motorbooks International
Dennis Kirk Part #: 361716
Motorbooks International Pro Motocross And Off-Road Riding Technique-Third Edition: Manufacturer part # 137409 - Tip on how to ride like a professional. Covers everything from how to rail corners to crossing rocky streams and staying on your bike when the riding gets rough. New third edition includes detailed 4-stroke riding techniques in addition to techniques for supercross, motocross, hare scrambles, enduro and trail riding along with training methods, a buyer's guide for gear, goggle prep and more. Cornering, jumps, whoops, braking, starts and more are examined with step-by-step photos and advanced tips and techniques from pro riders. Measures 8 1/4in. x 10 3/4in.. Softcover; more than 220 pages with color and black-and-white photographs.. 137409 7 on hand
$20.99Motorbooks International Motocross and Off Road Training Handbook 139308
Manufacturer: Motorbooks International
Dennis Kirk Part #: 361790
Motorbooks International Motocross and Off Road Training Handbook: Manufacturer part # 139308 - One-of-a-kind training manual for motocross and supercross riders. Topics include weight training and proper nutrition, age-specific training programs, gear selection, scheduling, staying hydrated, healthy and injury-free; keeping a log, cross-training, race-day warms-ups and stretches, plus many more valuable training tips to improve overall performance. Measures 8 1/4in. x 10 5/8in.. Softcover; 112 pages with 140 color photographs.. 139308 8 on hand
$28.99Motorbooks International Motocross & Off-Road Performance Handbook-Third Edition 137408
Manufacturer: Motorbooks International
Dennis Kirk Part #: 361709
Motorbooks International Motocross & Off-Road Performance Handbook-Third Edition: Manufacturer part # 137408 - Build a factory race replica or maximize your stock motocross or off-road bike with expert techniques from tuner and columnist Eric Gorr. Tuning suspension is explained in detail, describing everything from changing fork seals and replacing shock springs to revalving and adjusting the compression and rebound damping. This updated edition covers the aluminum-framed Powerjet-carbureted Honda CR250R and CR125R, the XR400, the Yamaha 4-stroke YZ400F and WR400F. Measures 8 1/4in. x 10 3/4in.. Softcover; 224 pages with 75 black-and-white and 250 color photographs.. 137408 Expected Soon
