|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$27.95
Parts Unlimited Tether Kill Switch, Normally Open 21202
Dennis Kirk Part #: 21202
Parts Unlimited Tether Kill Switch, Normally Open 21202: Manufacturer part # 370106 - Kills engine if rider is separated from machine. Coiled cord clips easily to rider. This tether is normally open. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO NOT have continuity, this tether switch WILL NOT work for your machine. 4. If you DO have continuity, this tether WILL work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. 370106
10+ on hand
More Info/Options for Parts Unlimited Tether Kill Switch, Normally Open 21202
|
|
|
|
$11.95
Parts Unlimited Universal Kill Switch 20644
Dennis Kirk Part #: 20644
Parts Unlimited Universal Kill Switch 20644: Manufacturer part # 600173 - Universal clamp-on handlebar kill switch with wire harness. , NOTE: This kill switch has a normally open switch, to see if this is correct for your machine you must perform the following test, , 1. Locate the two wires going to the kill switch, 2. With switch in run position test for continuity between wires, 3. If you do not have continuity this kill switch will work for your machine, 4. If you do have continuity this kill switch will not work for your machine - can use kill switch part numbers 21-0426, 21-0427, 21-0428 or 21-0438 (handlebar mount) or 21-0034 (body mounted switch) and 21-214 (cap). 600173
10+ on hand
More Info/Options for Parts Unlimited Universal Kill Switch 20644
|
|
|
|
