CLOSEOUT!
Was: $284.99
Now: $199.49
Corbin 50s Style Plain Pillion Pad HVTX13P4
Manufacturer: Corbin
Dennis Kirk Part #: 453209
Corbin 50s Style Plain Pillion Pad: Manufacturer part # HVTX13P4 - Designed to provide maximum rider comfort combined with a classy, nostalgic look. Accepts removable driver's backrest (sold separately). Bolts to the stock location. Genuine leather seating panels feature ergonomic seating position and 27.5 in. seating height. Measures: 8 1/2 in. W x 10 1/2 in. L. HVTX13P4 5 on hand
CLEARANCE!
Was: $284.99
Now: $199.49
Corbin 50s Style Plain Pillion Pad HVTXRP
Manufacturer: Corbin
Dennis Kirk Part #: 453215
Corbin 50s Style Plain Pillion Pad: Manufacturer part # HVTXRP - Designed to provide maximum rider comfort combined with a classy, nostalgic look. Accepts removable driver's backrest (sold separately). Bolts to the stock location. Genuine leather seating panels feature ergonomic seating position and 27.5 in. seating height. Measures: 9 in. W x 10 1/2 in. L. HVTXRP 3 on hand
CLEARANCE!
Was: $284.99
Now: $199.49
Corbin 50s Style Plain Pillion Pad 288
Manufacturer: Corbin
Dennis Kirk Part #: H45887
Corbin 50s Style Plain Pillion Pad: Manufacturer part # 288 - Fits seat, H45-832 NOTE: This Corbin® product features the "NEW" pebble grain texture. The new texture has the same high quality and craftsmanship you expect from Corbin. The 2003 and prior production is slightly smoother than the 2004. Corbin's new leather has a little larger, more visible pebble grain pattern. You may not want to mix the textures on your bike, so watch for this message throughout the Corbin® line.. 288 1 on hand
$59.95Drag Specialties 5 3/4 in. Springer Style Plain Headlight DS280008
Manufacturer: Drag Specialties
Dennis Kirk Part #: H22215
Drag Specialties 5 3/4 in. Springer Style Plain Headlight: Manufacturer part # DS280008 - Fits most stock and custom applications; mounting block located at back of light housing. Mounting block and 60/55W H-4 bulb system. Available in both plain and with side grooves and built-in visor.. DS280008 3 on hand
$366.99Mustang Smooth Style Plain Ultra Touring Seat 75525
Manufacturer: Mustang
Dennis Kirk Part #: 455626
Mustang Smooth Style Plain Ultra Touring Seat: Manufacturer part # 75525 - Ultra comfortable touring seat for FL models. Sporty enough for the FLHS and elegant enough for the FLHTC. Supported foam eliminates that "dumped forward" feeling. Seat nose extension looks like a custom panel. Front bucket has a full skirt with braided edge. Available plain or studded with leather tied conchos and chrome studs. One-piece baseplate is split in the middle for a driver backrest. Features a chrome rear tab or threaded side mounts. One-piece touring seats are constructed on extra rugged, triple-layered fiberglass. Made in the U.S.A.. 17 in. front width and 16 in. rear width. 75525 1 on hand
$2819.99Chopper Guys Bagger-Style Frame SUBCGFLB
Manufacturer: Chopper Guys
Dennis Kirk Part #: 493575
Chopper Guys Bagger-Style Frame: Manufacturer part # SUBCGFLB - The closest frame to stock made in the aftermarket industry. Will work with OEM parts without having to make modifications. Handcrafted CNC machined and laser-cut components. Features the strength and quality not found on any frame in the industry. Uses a stock stretch and stock rake. Accepts a 130-150mm rear tire, or 200mm tire with any 200mm kit for a stock frame. 1 1/8in. tubing is used on the main frame rails. Can use with Twin Cam FLT or Evolution drivetrains. Includes CNC-machined rear motor mounts. Accepts stock gas tank, fenders, seat, axle, covers and accessories; stock pivot shaft and components; stock front end; stock battery box; stock or Chopper Guys custom billet swingarm; or 200mm wide tire kit for a stock frame (not included). Includes Manufacturer's Statement of Origin (MSO). Custom swingarm (part number 58-2766) and bushing kit (12-2946) available separately. NOTE: This item ships in 3-4 days after the order is placed.. SUBCGFLB 1 on hand
$1333.99Mid USA Softail-Style Frame for Twin Cam 88B Engine 20013
Manufacturer: Mid USA
Dennis Kirk Part #: 492094
Mid USA Softail-Style Frame for Twin Cam 88B Engine: Manufacturer part # 20013 - Standard width. Backbones made from 1 1/2 inch square steel tubing with .188 inch wall thickness for maximum strength. Choice of OEM 30 degree rake or 35 degree rake - 49-2095. TIG welded in high-stress areas. Fully machined rear swingarm support plates for OEM look. Do not include provision for fork lock. Use Softail 84-88 steering fork head cups and races found in Suspension section. Designed for use with 00-06 Softail components. Include Manufacturer's Statement of Origin (MSO). , , Item ships 3-4 days after order is placed.. 20013 2 on hand
$1333.99Mid USA Softail-Style Frame for Twin Cam 88B Engine 20014
Manufacturer: Mid USA
Dennis Kirk Part #: 492095
Mid USA Softail-Style Frame for Twin Cam 88B Engine: Manufacturer part # 20014 - Standard width. Backbones made from 1 1/2 in. square steel tubing with .188 in. wall thickness for maximum strength. 35 degree rake. TIG welded in high-stress areas. Fully machined rear swingarm support plates for OEM look. Do not include provision for fork lock. Use Softail 84-88 steering fork head cups and races found in Suspension Section. Designed for use with 00-06 Softail components. Include Manufacturer's Statement of Origin (MSO). For OEM 30 degree rake use 49-2094. , , NOTE: This item ships in 3-4 days after the order is placed.. 20014 1 on hand
$2375.99Chopper Guys Wide Tire Twin Cam FXR-Style Frame Kit with Swingarm FRMFGXT
Manufacturer: Chopper Guys
Dennis Kirk Part #: 492806
Chopper Guys Wide Tire Twin Cam FXR-Style Frame Kit with Swingarm: Manufacturer part # FRMFGXT - Constructed of 1 1/4 in. tubing with a 2 1/2 in. square backbone with a 28 degree rake and 1 in. backbone stretch. Works with Twin Cam A motor and FLT complete drivetrain. Includes forward or mid control mounts, and a battery box cover. Wide-tire kit accepts up to a 180mm tire with stock 1 1/2 in. belt. Wide-tire and standard-width kits will accept stock-length front ends, stock fuel tanks and most FXR stock components. Symmetrically-widened Wide Tire frame has an engine offset 5/8 in. to the left; requires custom seat. Standard-width frame is available frame-only or with swingarm. Custom billet swingarm, pivot shaft and complete axle with hardware, (unless otherwise noted), included with each kit. Rubber mounted. Includes Manufacturers Statement of Origin (MSO). , , NOTE: This item ships 3-4 business days after order is placed. FRMFGXT 1 on hand
$2058.99Chopper Guys Standard-Width Twin Cam FXR-Style Frame Kit with Swingarm FRMFGXRT
Manufacturer: Chopper Guys
Dennis Kirk Part #: 492807
Chopper Guys Standard-Width Twin Cam FXR-Style Frame Kit with Swingarm: Manufacturer part # FRMFGXRT - Constructed of 1 1/4 in. tubing with a 2 1/2 in. square backbone with a 28 degree rake and 1 in. backbone stretch. Works with Twin Cam A motor and FLT complete drivetrain. Includes forward or mid control mounts, and a battery box cover. Wide-tire kit accepts up to a 180mm tire with stock 1 1/2 in. belt. Wide-tire and standard-width kits will accept stock-length front ends, stock fuel tanks and most FXR stock components. Symmetrically-widened Wide Tire frame has an engine offset 5/8 in. to the left; requires custom seat. Standard-width frame is available frame-only or with swingarm. Custom billet swingarm, pivot shaft and complete axle with hardware, (unless otherwise noted), included with each kit. Rubber mounted. Includes Manufacturers Statement of Origin (MSO). , , NOTE: This item ships 3-4 business days after order is placed. FRMFGXRT 1 on hand
$1579.99Chopper Guys Standard-Width Twin Cam FXR-Style Frame Kit FRMFGXFT
Manufacturer: Chopper Guys
Dennis Kirk Part #: 492808
Chopper Guys Standard-Width Twin Cam FXR-Style Frame Kit: Manufacturer part # FRMFGXFT - Constructed of 1 1/4 in. tubing with a 2 1/2 in. square backbone with a 28 degree rake and 1 in. backbone stretch. Works with Twin Cam A motor and FLT complete drivetrain. Includes forward or mid control mounts, and a battery box cover. Wide-tire kit accepts up to a 180mm tire with stock 1 1/2 in. belt. Wide-tire and standard-width kits will accept stock-length front ends, stock fuel tanks and most FXR stock components. Symmetrically-widened Wide Tire frame has an engine offset 5/8 in. to the left; requires custom seat. Standard-width frame is available frame-only or with swingarm. Custom billet swingarm, pivot shaft and complete axle with hardware, (unless otherwise noted), included with each kit. Rubber mounted. Includes Manufacturers Statement of Origin (MSO). , , NOTE: This item ships 3-4 business days after order is placed. FRMFGXFT 1 on hand
$1688.99Chopper Guys Swedish-Style Wide Rigid Frame Kit FRMFGRS
Manufacturer: Chopper Guys
Dennis Kirk Part #: H491005
Chopper Guys Swedish-Style Wide Rigid Frame Kit: Manufacturer part # FRMFGRS - Frames for all Big Twin models and transmission; meet the highest quality-control standards I the industry. CNC-machined billet sub-assemblies. Heli-arc welded in a state-of-the-art frame jig: mounting surfaces guaranteed flat and parallel to a tolerance of .002". Frames are serial numbered and delivered with a manufacturers statement of origin. Made in the U.S.A. Swedish-style Wide Rigid Frame has 6" down tube and 2 1/2" backbone stretch with a 40º neck rake. Widens frame approximately 1 1/4" with 5/8" motor and transmission offset. Low 4 1/2" ground clearance. Accepts 4- and 5-speed transmissions with stock motors or stroker motors. Accommodates 180 tire with stock belt, 200 tire with chain drive. Weighs 58 lbs.. No gas tank mounts; requires custom positioning and mounting. Comes with axle locators with bolts. , , 10" O.S. .S. fork tubes recommended to maintain lever ride height. , , Accepts Shovelhead and Evolution style engines only - not Twin Cam 88 This item ships 3-4 days after the order is placed.. FRMFGRS 1 on hand
