$89.95Drag Specialties Buffalo Drag Bar pH59764
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59764
Drag Specialties Buffalo Drag Bar: Manufacturer part # pH59764 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. Made in the U.S.A., , Bottom bar in photo, , 1 in. Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/8 in.Knurled. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , NOTE: Will not fit Touring 08-09 models. pH59764 1 on hand
$89.95Drag Specialties Buffalo Drag Bar for Springers pH59765
Manufacturer: Drag Specialties
Dennis Kirk Part #: H59765
Drag Specialties Buffalo Drag Bar for Springers: Manufacturer part # pH59765 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look (accepts 1 in. diameter handlebars only). Made in the U.S.A., , Top handlebar in photo, , 1" Diameter Clamping Width: 6-3/4 in., Inside Width of Knurling/outside: 4-1/16 in. / 5-7/16 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , NOTE: Will not fit Touring 08-09 models. pH59765 1 on hand
$154.95Drag Specialties Big Buffalo Drag Bars p595545
Manufacturer: Drag Specialties
Dennis Kirk Part #: 595545
Drag Specialties Big Buffalo Drag Bars: Manufacturer part # p595545 - True 1 1/2 in. diameter chrome-plated handlebars give your machine the biggest, fattest handlebar look. New Radius style features a smooth, clean stretch of steel with no welded sections. Get ultimate comfort from a choice of custom bends. Accept stock controls; bars are drilled and dimpled. Special risers required that accept 1 1/2 in. bars when using our Ape Hanger, Classic and Bagger bars. Risers are 1 1/2 in. and feature hidden clamp bolts and include upper clamps. Two styles of gauge mounts are available separately. Made in the U.S.A.. , , NOTE: OEM-style handlebar clamps are not designed for use with these handlebars.. , , NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter.. , , NOTE: Will not fit Touring 08-09 models. p595545 2 on hand
$109.99LA Choppers Drag Handlebar for Standard Models Flat Drag Bar
Manufacturer: LA Choppers
Dennis Kirk Part #: 594715
LA Choppers Drag Handlebar for Standard Models: Manufacturer part # Flat Drag Bar - Cool 1 1/4 in. handlebars for use with 1 in. stock-style handlebar clamps and grips. Dimpled and drilled for use with stock-type controls. Chrome plated for long-lasting good looks. Fit most models with risers on 3 1/2 in. centers. Ape Hanger bars for touring models have custom bends to clear FLHT fairings. Clamp area width is 5 14 in.. , , NOTE: Will not fit FLHR, FLHT, FLHX, FLTR 08-09 models. Flat Drag Bar 1 on hand
$217.99White Brothers Burly Super-Riser Medium Drag Bar 28386
Manufacturer: White Brothers
Dennis Kirk Part #: 593375
White Brothers Burly Super-Riser Medium Drag Bar: Manufacturer part # 28386 - Oversized 1 1/2 in. tubing for both riser and bar for a modern look. Choose from low-, standard- and high-rise designs. Feature pre-drilled inner slots in the bars' dimples for internal wiring; may also be wired externally. Work with OEM H-D and most aftermarket controls. 3 1/2 in. center-to-center riser width.. 28386 1 on hand
$217.99White Brothers Burly Super-Riser Low Drag Bar 28385
Manufacturer: White Brothers
Dennis Kirk Part #: 593374
White Brothers Burly Super-Riser Low Drag Bar: Manufacturer part # 28385 - Oversized 1 1/2 in. tubing for both riser and bar for a modern look. Choose from low-, standard- and high-rise designs. Feature pre-drilled inner slots in the bars' dimples for internal wiring; may also be wired externally. Work with OEM H-D and most aftermarket controls. 3 1/2 in. center-to-center riser width.. 28385 1 on hand
$217.99White Brothers Burly Super-Riser High Drag Bar 28387
Manufacturer: White Brothers
Dennis Kirk Part #: 593376
White Brothers Burly Super-Riser High Drag Bar: Manufacturer part # 28387 - Oversized 1 1/2 in. tubing for both riser and bar for a modern look. Choose from low-, standard- and high-rise designs. Feature pre-drilled inner slots in the bars' dimples for internal wiring; may also be wired externally. Work with OEM H-D and most aftermarket controls. 3 1/2 in. center-to-center riser width.. 28387 2 on hand
$282.99Wild 1 Inc. Chubby Springer Pullback Drag Bar WO565
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595095
Wild 1 Inc. Chubby Springer Pullback Drag Bar: Manufacturer part # WO565 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls. Made in the U.S.A.. , , Width: 31". , Rise: 7 1/2". , Pullback: 8". , Center Width: 7 3/4". , End Rise: 8 1/2". , Thread Size: 5/8"-18. , 1" Diameter Clamping Width: Not applicable. , Inside Width of Knurling/Outside: Not applicable. , Drilled for Internal Wiring: Yes. , Dimpled to Prevent Pinching Control Wires: No. , Three Notches for 08-up H-D w/electronic Throttle: No.. WO565 1 on hand
$197.99Wild 1 Inc. Chubby Pullback Drag Bar with 6 in. Riser WO500
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595061
Wild 1 Inc. Chubby Pullback Drag Bar with 6 in. Riser: Manufacturer part # WO500 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls. Made in the U.S.A.. , , Width: 31". , Rise: 7 1/2". , Pullback: 8". , Center Width: 7 3/4". , End Rise: 9". , Thread Size: 1/2"-1. , 1" Diameter Clamping Width: Not applicable. , Inside Width of Knurling/Outside: Not applicable. , Drilled for Internal Wiring: Yes. , Dimpled to Prevent Pinching Control Wires: No. , Three Notches for 08-up H-D w/electronic Throttle: No.. WO500 2 on hand
$197.99Wild 1 Inc. Chubby Pullback Drag Bar with 8 in. Riser WO501
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595062
Wild 1 Inc. Chubby Pullback Drag Bar with 8 in. Riser: Manufacturer part # WO501 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls. Made in the U.S.A.. , , Width: 31". , Rise: 9 1/2". , Pullback: 8". , Center Width: 7 3/4". , End Rise: 10 3/4". , Drilled for Internal Wiring: Yes. , Dimpled to Prevent Pinching Control Wires: No. , Three Notches for 08-Up H-D w/electronic Throttle: Yes. , Thread Size: 1/2"-13.. WO501 1 on hand
$197.99Wild 1 Inc. Chubby Pullback Drag Bar with 10 in. Riser WO507
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595068
Wild 1 Inc. Chubby Pullback Drag Bar with 10 in. Riser: Manufacturer part # WO507 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls. Made in the U.S.A.. , , Width: 31". , Rise: 11 1/2". , Pullback: 8 3/4". , Center Width: 7 3/4". , End Rise: 12 1/2". , Drilled for Internal Wiring: Yes. , Dimpled to Prevent Pinching Control Wires: No. , Three Notches for 08-Up H-D w/electronic Throttle: No. , Thread Size: 1/2"-13.. WO507 4 on hand
$202.99Wild 1 Inc. Chubby Low-Profile Pullback Drag Bar WO560
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595092
Wild 1 Inc. Chubby Low-Profile Pullback Drag Bar: Manufacturer part # WO560 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls. Made in the U.S.A.. , , Width: 31". , Rise: 8 1/2". , Pullback: 10 1/2". , Center Width: 7 3/4". , End Rise: 10 1/2". , Drilled for Internal Wiring: Yes. , Dimpled to Prevent Pinching Control Wires: No. , Three Notches for 08-Up H-D w/electronic Throttle: No. , Thread Size: 1/2"-13.. WO560 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
