$75.99Nelson-Rigg Silver Streak Magnetic Sport Tank Bag SSC120
Manufacturer: Nelson-Rigg
Dennis Kirk Part #: 505675
Nelson-Rigg Silver Streak Magnetic Sport Tank Bag: Manufacturer part # SSC120 - Fully expandable compact shape with detachable map pocket. Lightweight magnets for mounting. Side pockets to store your smaller items. Under-lid office organizer. Adjustable shoulder strap included. Measures: 13" L x 9" W x 6 - 10" H. , , This bag is designed to be mounted on top of a fuel tank. It has a flap design that has built in magnets to secure it to the tank... SSC120 Expected Soon
CLOSEOUT!
Was: $6.99
Now: $5.24
Zan Headgear Vented Sport Tank Flames Flydanna Headwrap ZX480
Manufacturer: Zan Headgear
Dennis Kirk Part #: 3566939
Zan Headgear Vented Sport Tank Flames Flydanna Headwrap: Manufacturer part # ZX480 - Headwraps keep you cooler in the summer and warmer in the winter. Vented with polyester mesh panels for extreme heat. Six-paneled skull cap features a tail on the back so it will slide easily onto your head. Ties at the base of the neck to keep headwrap in place. 100% cotton fabric. One size fits most.. ZX480 1 on hand
$84.99Gears Sport Star Tank/Tail Bag 1001641
Manufacturer: Gears
Dennis Kirk Part #: 506558
Gears Sport Star Tank/Tail Bag: Manufacturer part # 1001641 - Dual-function tank/tail bag that's made of 1200-denier Technolast UV-treated polyester. Extra-large main compartment, two large side pockets and one back pocket with reflective trim. Map pouch on both levels with access channel to allow charging or headphone cable out of main compartment. Converts to backpack when detached. Includes rain cover with clear top for map viewing; stores in special external pocket. Rubber, easy-grip handle. Rare earth mounting magnets are lightweight but offer incredible strength; includes tail bag mount. Measures 13" L x 9.5" W x 8.5" H.. 1001641 2 on hand
$87.99Chase Harper Sport Trek Tank Bag w/Quick-Release Mounts 800BLACK
Manufacturer: Chase Harper
Dennis Kirk Part #: 503828
Chase Harper Sport Trek Tank Bag w/Quick-Release Mounts: Manufacturer part # 800BLACK - Hidden wedge-shaped panel provides extra capacity when unzipped. 1000 denier Cordura with 3/8 in. foam padding inside main compartment and bottom panel. Full-size interior mesh pocket with hook-and-loop closure. Quick-release mount. YKK zippers and sliders. 1 in. nylon webbing carry handle. Removable flip-over map pouch. Inside key-chain holder and exterior zippered pocket. Reflective stripe on sides and rear of bag. Measures 12 in. L x 9 in. W x 5-10 in. H.. 800BLACK 1 on hand
$123.99Dowco Fastrax Sport and Adventure Tank Bag 5014300
Manufacturer: Dowco
Dennis Kirk Part #: 506598
Dowco Fastrax Sport and Adventure Tank Bag: Manufacturer part # 5014300 - Ergonomically designed tank bag featuring a no-slip, scratch-resistant padded base. Made out of rugged 1680-denier polyester with carbon fiber vinyl accents. Magnets and straps make this tank bag fit all tanks. Main compartment features internal storage pockets and hydration bladder storage area and access port (hydration bladder sold separately part number 506601). External storage area features draw-tight expansion; padded attachment straps and lockable security cable also included. Includes sewn-in rain hood, clear electronics storage area with audio/power ports, removable full-sized map panel and reflective material. Waterproof zippers feature lockable zipper pulls. For convenient carrying, bag comes with molded carry handles and backpack sling. Measures 14 in. x 9 1/2 in. x 6 in. expands to 14 in. x 9 1/2 in. x 10 in.. Black only. Included items:, 1 - tank bag, 1 - 38 in. long strap w/ 2 hooks, 1 - 32 in. long strap w/1 male release buckle, 1 - map pocket.. 5014300 10 on hand
$1115.99Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide 07010189
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183331
Russ Wernimont Designs Fuel-Injected Gas Tank - 20 1/2 in. wide: Manufacturer part # 07010189 - 6-gallon one-piece tanks are 1 1/2 in. wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Stock OEM fuel-pump assemblies work with the fuel-injected tanks and use a L96-06 vented gas cap. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (454539) and Profile (454538) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , NOTE: This item ships 3 or 4 days after the order is placed, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 07010189 1 on hand
$889.99Russ Wernimont Designs Smooth-Top Gas Tank 1914-0010
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H18709
Russ Wernimont Designs Smooth-Top Gas Tank: Manufacturer part # 1914-0010 - The master fender builder finally turns his attention to gas tanks. Beautiful, one-piece, single-cap designs handcrafted from 14- and 16-gauge steel. Universal 5 in. stretch tank fits most custom frames. Measures 25 in. L x 13 1/2 in. W. Tanks is designed to use vented gas cap for L96-03 models and 22mm petcock (sold separately), , NOTE: Not for use on fuel-injected models, , NOTE: FXSTD models require the use of a custom seat, , NOTE: Tank is pictured on the left DK Part no. H18708 is pictured on the right, , NOTE: This item ships 3-4 days after order is placed, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 1914-0010 1 on hand
$1115.99Russ Wernimont Designs Carb Gas Tank - 17 1/2 in. wide p183703
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183704
Russ Wernimont Designs Carb Gas Tank - 17 1/2 in. wide: Manufacturer part # p183703 - 17 1/2" and 20 1/2 in. widths are now available. A 3 in. stretch is featured on one-piece tanks. Curved bottom provides a custom look. Raw dash panel replaces the existing dash. Inside of tanks have a factory sealed powder coat primer. OEM fuel-pump assemblies are accepted on 03-07 style fuel-injected tanks and 96-06 style carb tanks include a filler plate/neck assembly; both use L96-08 non-vented gas caps. Approximate 6-gallon capacity. Tanks fit with RWD Profile (454538) and ProTour (454539) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , Dimensions , Length: 22 1/2 in., Width: 18 in., Tunnel Length: 18 1/2 in., , Tunnel Width , Front: 3 1/2 in., Rear: 5 in., , Tunnel Depth: , Front: 4 1/2 in., Rear: 4 1/4 in., , Tank Height: 9 in., Fuel Petcock: Left Rear, Petcock Thread Size: 22mm, Gas Cap Type: Threaded, Fuel Pump Tabs: No, , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending unit., , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. p183703 1 on hand
$1115.99Russ Wernimont Designs Carb Gas Tank - 20 1/2 in. wide RWD-800C
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 183040
Russ Wernimont Designs Carb Gas Tank - 20 1/2 in. wide: Manufacturer part # RWD-800C - 6-gallon one-piece tanks are 1 1/2 in. wider than stock tanks. Feature a 3 in. stretch and curved bottom for a custom look. Replace the existing dash with the included raw dash panel. Includes a factory sealed powder-coated primer finish. Carb tanks include a filler plate and neck assembly that uses a L96-06 vented gas cap. Tanks fit with RWD ProTour (454539) and Profile (454538) Seats, sold separately - Danny Grey seats also available: 455060, 455061, 455062, 455063, 455064, 455065, 455066, 455067. Made in the U.S.A.. , NOTE: Filler plate on carb tanks may require modifications to reinstall early-style sending units, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. RWD-800C 1 on hand
$876.99Russ Wernimont Designs Smooth-Top Gas Tank 1914-0009
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: H18708
Russ Wernimont Designs Smooth-Top Gas Tank: Manufacturer part # 1914-0009 - The master fender builder finally turns his attention to gas tanks. Beautiful, one-piece, single-cap designs handcrafted from 14- and 16-gauge steel. For Softail Frame the gauges, indicator lights and ignition switch must be relocated. Measures 21 1/4 in. L x 15 1/2 in. W. Tank is designed to use vented gas cap for L96-03 models and 22mm petcock (sold separately), , NOTE: Not for use on fuel-injected models, , NOTE: FXSTD models require the use of a custom seat, , NOTE: This item ships 3-4 days after the order is placed, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems. 1914-0009 1 on hand
$649.99Eddie Trottas Thunder Design Thunder D-Seat Oil Tank TC-283
Manufacturer: Eddie Trottas Thunder Design
Dennis Kirk Part #: 493925
Eddie Trottas Thunder Design Thunder D-Seat Oil Tank: Manufacturer part # TC-283 - Oil tank for Softail-style batteries. Includes threaded cap, , NOTE: Fits Thunder Cycle ST300 frames only.. TC-283 1 on hand
$11.99Pingel Threaded Tank Bung 22A
Manufacturer: Pingel
Dennis Kirk Part #: 182928
Pingel Threaded Tank Bung: Manufacturer part # 22A - For use when installing a custom gas tank or need to repair your stock tank. Male tank bung with 22mm threads (same as OEM). Designed to be welded directly to the tank. Made in the U.S.A... 22A 2 on hand
