Speedo Tach

$9.95 Drag Specialties Speedo/Tach Cover Insert Q060904
Manufacturer: Drag Specialties
Dennis Kirk Part #: H40833
Drag Specialties Speedo/Tach Cover Insert: Manufacturer part # Q060904 - Chrome finish on stamped steel. Attached with double-back tape - no drilling required. Sold each.. Q060904
1 on hand

More Info/Options for Drag Specialties Speedo/Tach Cover Insert Q060904

Speedo Tach

$466.99 Dakota Digital Speedo/Tach Gauge for FatBob HLY2002
Manufacturer: Dakota Digital
Dennis Kirk Part #: 407170
Dakota Digital Speedo/Tach Gauge for FatBob: Manufacturer part # HLY2002 - Speedometer reads to 255 mph and can be calibrated for nearly any gearing or tire size combination; compatible with both electronic and cable drive applications. Odometer and two resettable trip odometers; resettable Miles to Service with warning (user settable countdown) and hour meter. Quick response bar graph tachometer is easily calibrated for 1-15 cylinders. Gear position indicator compatible with 3- 6-speed transmissions. Adjustable shift point indicator with warning and output for external shift light (external shift light not included). Various indicators can also be displayed such as turn signal, high beam, neutral, low oil pressure, low voltage and security indicators. Voltage readout. Compatible with automatic turn signal canceling. Also includes "Wait to start" / "Check Engine" light. Performance calculations include: 0- 60 time, high speed & high RPM recall, 1/4 mile time and speed. Chrome front bezel with non-glare scratch resistant lens. Machined aluminum housing. , , NOTE: This item ships 3 or 4 days after the order is placed. HLY2002
2 on hand

More Info/Options for Dakota Digital Speedo/Tach Gauge for FatBob HLY2002

Speedo Tach

$446.99 Dakota Digital 2 1/16 in. Speedo/Tach Gauge HLY3015
Manufacturer: Dakota Digital
Dennis Kirk Part #: H40495
Dakota Digital 2 1/16 in. Speedo/Tach Gauge: Manufacturer part # HLY3015 - Industry standard size 2 1/16 in.-dia. gauge features a 199-mph speedo and a user-selectable 0-5,000/0-8,000/0-16,000-rpm bar graph tach. Choice of display screens: speed only, speed and odometer with trip, or speed and bar graph tach. Also features indicators for low oil pressure, high beam, turn signals, transmission neutral and a check engine light for fuel-injected engines only. Simple menu-driven set up and calibration. High-brightness/low-glare vacuum fluorescent graphic display has no engraved surface features, which gives a full black-out effect when the unit is turned off. Gauge is 2 1/6 in.-dia. cutout x 2 3/16 in.-o.d. x 1 1/2 in.-deep. Outboard 3 in. x 3 in. x 1.5 in. control module keeps wires together for installation and cuts down on the number of wires needed to run to the gauge. , , Sending Units, H40634 36 in. Extension cable for 96-03 OEM electronic transmission sensor, H40635 Transmission mounted speed sensor for 96-06 OEM and aftermarket Big Twin transmission, H40636 Rear wheel pickup sensor for Softail and rigid applications (1-1/8 in. i.d.), H40633 Sending unit for cable drive applications (can be remotely mounted or mounted to the speedometer; screws to the end of the cable), H40637 Universal inductive sender (reads the transmission gear teeth or steel rear sprocket), Mounting Cups, H40638 2-1/16 in. chrome deep cup, 407345 2-1/16 in. raw steel cup, Chrome Mounting Brackets for 2-1/16 in. Mounting Cups, H40640 1 in. dia., H40641 1-1/4 in. dia., H40642 1-1/2 in. dia.. HLY3015
2 on hand

More Info/Options for Dakota Digital 2 1/16 in. Speedo/Tach Gauge HLY3015

Speedo Tach

$7.95 Drag Specialties Speedo and Tach Housing Gap Seal 358023HC4
Manufacturer: Drag Specialties
Dennis Kirk Part #: H40036
Drag Specialties Speedo and Tach Housing Gap Seal: Manufacturer part # 358023HC4 - For H40-043 gauge housing.. 358023HC4
1 on hand

More Info/Options for Drag Specialties Speedo and Tach Housing Gap Seal 358023HC4

Speedo Tach

CLEARANCE!
Was: $229.95
Now: $23.00
50s Boy Custom Tach/Speedo Mounts for OEM Style and Mini Gauges p407098
Manufacturer: 50s Boy
Dennis Kirk Part #: 407098
50s Boy Custom Tach/Speedo Mounts for OEM Style and Mini Gauges: Manufacturer part # p407098 - Machined from 6061 T6 aluminum with a ball end milled design. Highly polished, then chrome plated to show a quality appearance. Available with or without indicator light mounting holes. Made in the USA by 50s boy Chrome caps required to properly mount gauges, must order separately Mini gauge mounts come with rubber isolation gaskets Dual guage without light holes Flat mount for 1 1/4 in. Bars with built in risers .. p407098
2 on hand

More Info/Options for 50s Boy Custom Tach/Speedo Mounts for OEM Style and Mini Gauges p407098

Speedo Tach

CLOSEOUT!
Was: $225.95
Now: $22.60
50s Boy Custom Tach/Speedo Mounts with Light Holes for OEM Style and Mini Gauges p407096
Manufacturer: 50s Boy
Dennis Kirk Part #: 407096
50s Boy Custom Tach/Speedo Mounts with Light Holes for OEM Style and Mini Gauges: Manufacturer part # p407096 - Machined from 6061 T6 aluminum with a ball end milled design. Highly polished, then chrome plated to show a quality appearance. Available with or without indicator light mounting holes. Made in the USA by 50s boy Chrome caps required to properly mount gauges, must order separately Mini gauge mounts come with rubber isolation gaskets Dual guage with light holes Flat mount for 1 in. Bars with built in risers .. p407096
2 on hand

More Info/Options for 50s Boy Custom Tach/Speedo Mounts with Light Holes for OEM Style and Mini Gauges p407096

Speedo Tach

CLEARANCE!
Was: $90.99
Now: $45.49
Arlen Ness Custom Speedo and Tach Mount 06-109
Manufacturer: Arlen Ness
Dennis Kirk Part #: H400221
Arlen Ness Custom Speedo and Tach Mount: Manufacturer part # 06-109 - Heres what you need to mount 84-94 (3.1 in. dia.) standard speedos to a set of custom handlebars with risers welded onto the bars. Precisely machined from aluminum to mount to the riser portion of any custom 1" handlebar that has 3 1/2 in. center-to-center riser tubes welded on or a set of round pullback risers. Polished, then chromed for a fine finish. Made in the U.S.A.. 06-109
1 on hand

More Info/Options for Arlen Ness Custom Speedo and Tach Mount 06-109

Speedo Tach

CLEARANCE!
Was: $84.99
Now: $50.99
Arlen Ness Dual Mini Speedo and Tach Mount for 1 1/4 in. Bar 06-032
Manufacturer: Arlen Ness
Dennis Kirk Part #: H40687
Arlen Ness Dual Mini Speedo and Tach Mount for 1 1/4 in. Bar: Manufacturer part # 06-032 - Here is what you need to mount 2.375 in./2.4 in. mini speedos and tachs to a set of custom handlebars with risers welded onto the bars. Precisely machined from aluminum to mount to the riser portion of any custom 1 1/4 in. handlebar that has 3 1/2 in. center-to-center riser tubes welded on or a set of round pullback risers. Polished, then chromed for a fine finish. Made in the U.S.A.. NOTE: Chrome bullet-style cups (H40-694, H40-695) fit 1 7/8 in. single gauge mounts only: H40-0223, H40-544. 06-032
1 on hand

More Info/Options for Arlen Ness Dual Mini Speedo and Tach Mount for 1 1/4 in. Bar 06-032

Speedo Tach

$42.95 Moose Hour/Tach Meter HR8061M
Manufacturer: Moose
Dennis Kirk Part #: 407216
Moose Hour/Tach Meter: Manufacturer part # HR8061M - Maintenance times for oil changes, valve adjustments, spark plugs and more are tracked by the hour meter. Works with any gas engine up to two cylinders at speeds up to 8000 rpm; check your rpm with the hour/tach meter. ours automatically roll over, record and can display up to 9,999.9. Attaches easily with the included hardware. No batteries are needed as the hour meter connects to the spark plug wire. Encased in 100 percent epoxy. Firing pattern: 1 spark = 1 rpm; resolution in 10 rpm increments. For optional steering stem mount order 40-7659.. HR8061M
More than 10 on hand

More Info/Options for Moose Hour/Tach Meter HR8061M

Speedo Tach

$267.99 Delkron FXR-Style Bare Transmission Case with Speedo Sensor Hole D4024
Manufacturer: Delkron
Dennis Kirk Part #: H14620
Delkron FXR-Style Bare Transmission Case with Speedo Sensor Hole: Manufacturer part # D4024 - 356T-6 aluminum used to cast in a permanent mold for superior strength. Finished on a CNC vertical mill for precision locating and tolerances. All OEM FXR 1990-1994 transmission parts fit this case. Made in the U.S.A.. Includes an MSO (Manufacturers Statement of Origin).. D4024
1 on hand

More Info/Options for Delkron FXR-Style Bare Transmission Case with Speedo Sensor Hole D4024

Speedo Tach

$654.99 Delkron Complete Transmission Case Assembly w/Trap Door & Speedo Sensor Hole D4012
Manufacturer: Delkron
Dennis Kirk Part #: 148828
Delkron Complete Transmission Case Assembly w/Trap Door & Speedo Sensor Hole: Manufacturer part # D4012 - 356 T-6 aluminum used to cast in a permanent mold for superior strength. Finished on a CNC vertical mill for precision locating and tolerances. Replace OEM NOS. 34731-86A/34731-89. Include an MSO (Manufacturer's Statement of Origin). Made in the U.S.A.. NOTE: This item ships in 3-4 days after the order is placed.. D4012
1 on hand

More Info/Options for Delkron Complete Transmission Case Assembly w/Trap Door & Speedo Sensor Hole D4012

Speedo Tach

$44.99 Hardline Hour/Tach Meter HR8061
Manufacturer: Hardline
Dennis Kirk Part #: 407082
Hardline Hour/Tach Meter: Manufacturer part # HR8061 - Includes Tachometer & Hour meter functions. Track service time and rpm of your bike -- perfect for timely oil changes, valve adjustments, spark plugs replacements, etc.. Usable with any gasoline engine (up to two cylinders and 8000 rpm). Firing pattern: 1 spark = 1 rpm; resolution in 10 rpm increments. Peel and stick or attach with enclosed hardware. Connects to spark plug wire so no batteries are required. Safely and completely encased in 100% epoxy. Steering stem mount is available seperately, part number 40-7659. HR8061
10 on hand

More Info/Options for Hardline Hour/Tach Meter HR8061

Speedo Tach

Speedo Tach