$4702.99Independent Cycle Inc. Lowlife Right-Side Drive Softail Frame Kit p494822
Manufacturer: Independent Cycle Inc.
Dennis Kirk Part #: 494822
Independent Cycle Inc. Lowlife Right-Side Drive Softail Frame Kit: Manufacturer part # p494822 - Radial bent original frame constructed of DOM tubing with a .157 in./.187 in. wall thickness features a 40 degree neck rake with 7 in. stretch. Machined neck stem takes press-in bearing races; no need for fork cups. Narrowed frame rails for better cornering, even at low ride height; low seat height for lower center of gravity. Triangulated, solid machined top motor mount. One-piece machined transmission plate is 1/2 in. thick. Engine and transmission are centered in chassis for excellent balance. Right-side drive only and accommodates wide tires. Welded-on mount tabs allow 84-99 Softail-style forward controls to be mounted to chassis. Chrome Legend Air Suspension is included and installs flush with the bottom of the frame. Swingarm features triangulated high-strength design, DOM tubing all-radial bends, 1 in. stainless rear axle, flush axle caps with hidden fasteners, two stainless pivot bolts and pivot axis tube, pivot bearings and spacers. Swingarm accommodates 240, 280 or 300mm rear tire with a full-width belt. Features oil tank hidden under transmission for better weight distribution, rubber isolated battery mount and hidden compressor mount as part of the battery mount. Required primary drive sold separately. , , NOTE:, Includes a manufactures statement of origin (MSO), , For primary motor plate and belt kit use part number 20-8577, , This item ships in 3-4 days after the order is placed. p494822 1 on hand
$1333.99Mid USA Softail-Style Frame for Twin Cam 88B Engine 20013
Manufacturer: Mid USA
Dennis Kirk Part #: 492094
Mid USA Softail-Style Frame for Twin Cam 88B Engine: Manufacturer part # 20013 - Standard width. Backbones made from 1 1/2 inch square steel tubing with .188 inch wall thickness for maximum strength. Choice of OEM 30 degree rake or 35 degree rake - 49-2095. TIG welded in high-stress areas. Fully machined rear swingarm support plates for OEM look. Do not include provision for fork lock. Use Softail 84-88 steering fork head cups and races found in Suspension section. Designed for use with 00-06 Softail components. Include Manufacturer's Statement of Origin (MSO). , , Item ships 3-4 days after order is placed.. 20013 1 on hand
$1333.99Mid USA Softail-Style Frame for Twin Cam 88B Engine 20014
Manufacturer: Mid USA
Dennis Kirk Part #: 492095
Mid USA Softail-Style Frame for Twin Cam 88B Engine: Manufacturer part # 20014 - Standard width. Backbones made from 1 1/2 in. square steel tubing with .188 in. wall thickness for maximum strength. 35 degree rake. TIG welded in high-stress areas. Fully machined rear swingarm support plates for OEM look. Do not include provision for fork lock. Use Softail 84-88 steering fork head cups and races found in Suspension Section. Designed for use with 00-06 Softail components. Include Manufacturer's Statement of Origin (MSO). For OEM 30 degree rake use 49-2094. , , NOTE: This item ships in 3-4 days after the order is placed.. 20014 Expected Soon
$892.99Mid USA OE-Style Replacement Frame For Softail 20015
Manufacturer: Mid USA
Dennis Kirk Part #: H6620015
Mid USA OE-Style Replacement Frame For Softail: Manufacturer part # 20015 - Create your own Softail model using 86-99 components. For strength, this frame's backbone is made of 1 1/2 in. o.d., .188 in. wall thickness DOM tubing. The 1 1/8 in. o.d. tubing has a .120 in. wall thickness that has been TIG welded on all-new hardened and ground tooling for the most accurate fit ever. Made to accept a Big Twin Evolution engine with up to .200 in. taller cylinders, a 5-speed solid-mount tranmission, rear belt drive and flatside Fat Bob gas tanks. A weld-on bracket kit complete with oil filter mount, rear brake master cylinder mount, electrical connection bracket and highway bar/clutch cable bracket is also supplied. Supplied with Manufacturer's Statement of Origin. OE rake and stretch, replaces OEM NO. 47008-89A.. 20015 3 on hand
$30.99Goodridge Rear Brake Tee for Softail CM001
Manufacturer: Goodridge
Dennis Kirk Part #: 271145
Goodridge Rear Brake Tee for Softail: Manufacturer part # CM001 - Chrome-plated finish. Designed for use with -3 size hose. Accepts most hydraulic brake light switches. For use with Goodridge universal brake lines.. CM001 1 on hand
$32.99Goodridge Universal Rear Brake Tee for Softail MCHD015
Manufacturer: Goodridge
Dennis Kirk Part #: H19873
Goodridge Universal Rear Brake Tee for Softail: Manufacturer part # MCHD015 - For use with Goodridge universal brake lines.. MCHD015 2 on hand
$1204.99Paughco Standard Custom Wide Springer Front Fork 181ST
Manufacturer: Paughco
Dennis Kirk Part #: H58191
Paughco Standard Custom Wide Springer Front Fork: Manufacturer part # 181ST - From the premier Springer manufacturer comes classic Springer looks featuring quality second to none. To meet your specific needs, these front forks are available with or without shocks in various lengths. Wide Springer without shock features mounting points for dual disc brakes, but no front fender mounting points. Wide Springer with shock (part no. H58196) uses a front fender mount similar to the 88-92 FXSTS. Both Springers use standard neck bearings of 1 in.. Distance between rear legs is 8 5/16 in. with an outside width of 9 1/2 in.. Forks come assembled and include fork neck, top nut, crown nut, riser style top clamp and inner springs. Fit all Big Twins 36-07 (except FLT and 04-07 FXD models) and all XL 82-03 models. Use of the Paughco axle required, sold separately- H58-193 for OEM Brake, H58-192 for performance machine brake. Fork recommended for 21 in. wheels only. NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot. Please note that 25 in. stock length forks are the same length as OEM forks used on 48-84 FLH Big Twins. The correct length for the equivalent of a FXSTS Springer fork would be +3 in. over stock (28 in. total) length. NOTE: This item ships 3-4 days after the order is placed.. 181ST 1 on hand
$1409.99Paughco +6 in. Custom Wide Springer Front Forks S1816
Manufacturer: Paughco
Dennis Kirk Part #: H58195
Paughco +6 in. Custom Wide Springer Front Forks: Manufacturer part # S1816 - From the premier Springer manufacturer comes classic Springer looks featuring quality second to none. To meet your specific needs, these front forks are available with or without shocks in various lengths. Wide Springer without shock features mounting points for dual disc brakes, but no front fender mounting points. Wide Springer with shock uses a front fender mount similar to the 88-92 FXSTS. Both Springers use standard neck bearings of 1 in.. Distance between rear legs is 8 5/16 in. with an outside width of 9 1/2 in.. Forks come assembled and include fork neck, top nut, crown nut, riser style top clamp and inner springs. Fit all Big Twins 36-07 (except FLT and 04-07 FXD models) and all XL 82-03 models. Use of the Paughco axle required, sold separately; H58193 for OEM brakes, H58192 for Performance Machine Brakes. Fork recommended for 21 in. wheels only. , NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot. Please note that 25 in. stock length forks are the same length as OEM forks used on 48-84 FLH Big Twins. The correct length for the equivalent of a FXSTS Springer fork would be +3 in. over stock (28 in. total) length. NOTE: This item ships 3-4 days after the order is placed.. S1816 1 on hand
$1409.99Paughco +3 in. Custom Wide Springer Front Forks S1813
Manufacturer: Paughco
Dennis Kirk Part #: H58194
Paughco +3 in. Custom Wide Springer Front Forks: Manufacturer part # S1813 - From the premier Springer manufacturer comes classic Springer looks featuring quality second to none. To meet your specific needs, these front forks are available with or without shocks in various lengths. Wide Springer without shock features mounting points for dual disc brakes, but no front fender mounting points. Wide Springer with shock uses a front fender mount similar to the 88-92 FXSTS. Both Springers use standard neck bearings of 1 in.. Distance between rear legs is 8 5/16 in. with an outside width of 9 1/2 in.. Forks come assembled and include fork neck, top nut, crown nut, riser style top clamp and inner springs. Fit all Big Twins 36-07 (except FLT and 04-07 FXD models) and all XL 82-03 models. Use of the Paughco axle required, sold separately; H58193 for OEM brakes, H58192 for Performance Machine Brake. Fork recommended for 21 in. wheels only. , NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot. Please note that 25 in. stock length forks are the same length as OEM forks used on 48-84 FLH Big Twins. The correct length for the equivalent of a FXSTS Springer fork would be +3 in. over stock (28 in. total) length. NOTE: This item ships 3-4 days after the order is placed.. S1813 1 on hand
$1204.99Paughco +3 in. Custom Wide Springer Front Forks 1813
Manufacturer: Paughco
Dennis Kirk Part #: H58189
Paughco +3 in. Custom Wide Springer Front Forks: Manufacturer part # 1813 - From the premier Springer manufacturer comes classic Springer looks featuring quality second to none. To meet your specific needs, these front forks are available with or without shocks in various lengths. Wide Springer without shock features mounting points for dual disc brakes, but no front fender mounting points. Wide Springer with shock (part no. H58196) uses a front fender mount similar to the 88-92 FXSTS. Both Springers use standard neck bearings of 1 in.. Distance between rear legs is 8 5/16 in. with an outside width of 9 1/2 in.. Forks come assembled and include fork neck, top nut, crown nut, riser style top clamp and inner springs. Fit all Big Twins 36-07 (except FLT and 04-07 FXD models) and all XL 82-03 models. Use of the Paughco axle required, sold separately: H58193 for OEM Brake, H58192 for Performance Machine Brake. Fork recommended for 21 in. wheels only. , NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot. Please note that 25 in. stock length forks are the same length as OEM forks used on 48-84 FLH Big Twins. The correct length for the equivalent of a FXSTS Springer fork would be +3 in. over stock (28 in. total) length. NOTE: This item ships 3-4 days after the order is placed.. 1813 1 on hand
$1409.99Paughco Standard Custom Wide Springer Front Fork S181ST
Manufacturer: Paughco
Dennis Kirk Part #: H58196
Paughco Standard Custom Wide Springer Front Fork: Manufacturer part # S181ST - From the premier Springer manufacturer comes classic Springer looks featuring quality second to none. To meet your specific needs, these front forks are available with or without shocks in various lengths. Wide Springer without shock features mounting points for dual disc brakes, but no front fender mounting points. Wide Springer with shock uses a front fender mount similar to the 88-92 FXSTS. Both Springers use standard neck bearings of 1 in.. Distance between rear legs is 8 5/16 in. with an outside width of 9 1/2 in.. Forks come assembled and include fork neck, top nut, crown nut, riser style top clamp and inner springs. Fit all Big Twins 36-07 (except FLT and 04-07 FXD models) and all XL 82-03 models. Use of the Paughco axle required, sold separately; H58193 for OEM brakes, H58192 for Performance Machine Brake. Fork recommended for 21 in. wheels only. , NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot. Please note that 25 in. stock length forks are the same length as OEM forks used on 48-84 FLH Big Twins. The correct length for the equivalent of a FXSTS Springer fork would be +3 in. over stock (28 in. total) length. NOTE: This item ships 3-4 days after the order is placed.. S181ST 1 on hand
$1204.99Paughco +6 in. Custom Wide Springer Front Forks 1816
Manufacturer: Paughco
Dennis Kirk Part #: H58190
Paughco +6 in. Custom Wide Springer Front Forks: Manufacturer part # 1816 - From the premier Springer manufacturer comes classic Springer looks featuring quality second to none. To meet your specific needs, these front forks are available with or without shocks in various lengths. Wide Springer without shock features mounting points for dual disc brakes, but no front fender mounting points. Wide Springer with shock (part no. H58196) uses a front fender mount similar to the 88-92 FXSTS. Both Springers use standard neck bearings of 1 in.. Distance between rear legs is 8 5/16 in. with an outside width of 9 1/2 in.. Forks come assembled and include fork neck, top nut, crown nut, riser style top clamp and inner springs. Fit all Big Twins 36-07 (except FLT and 04-07 FXD models) and all XL 82-03 models. Use of the Paughco axle required, sold separately; H58193 for OEM brake, H58192 for Performance Machine Brake. Fork recommended for 21 in. wheels only. , NOTE: Overall length is measured from the bottom of the top clamp to the center of the rear leg pivot. Please note that 25 in. stock length forks are the same length as OEM forks used on 48-84 FLH Big Twins. The correct length for the equivalent of a FXSTS Springer fork would be +3 in. over stock (28 in. total) length. NOTE: This item ships 3-4 days after the order is placed.. 1816 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
