Socket Tool

$38.99 JIMS Oxygen Sensor Socket Tool 282796
Dennis Kirk Part #: 282796
JIMS Oxygen Sensor Socket Tool 282796: Manufacturer part # 969 - Installs and removes oxygen sensors for fuel-injected bikes. 3/8" drive receiver. Can also be used with a 7/8" wrench. Withstands up to 125 ft. lbs. of torque. For Dyna Glide 06 and all Big Twin 07-08 models.. 969
3 on Hand

More Info/Options for JIMS Oxygen Sensor Socket Tool 282796

$25.99 Cruz Tools Powerdrive Sliding T-Driver w/8-piece Socket Set 282228
Dennis Kirk Part #: 282228
Cruz Tools Powerdrive Sliding T-Driver w/8-piece Socket Set 282228: Manufacturer part # TSDS38 - Sliding T-handle has a 3/8 in. socket driver. Professional-quality construction, heat-treated chrome vanadium tool with polished chrome finish. Set has an 8mm, 10mm, 12mm, 14mm and 17mm six-point socket array, 5mm and 6mm hex bits and a #2 Phillips bit. Sockets snap onto a clip that fastens to the T-driver handle.. TSDS38
2 on Hand

More Info/Options for Cruz Tools Powerdrive Sliding T-Driver w/8-piece Socket Set 282228

$9.99 Cruz Tools 13mm Euro Powerdrive T-Socket Wrench 282149
Dennis Kirk Part #: 282149
Cruz Tools 13mm Euro Powerdrive T-Socket Wrench 282149: Manufacturer part # TSS13M - Perfect for garage and water use. Features a sliding T-handle for increased leverage. Polished chrome and precision forged. This is designed for European machines.. TSS13M
2 on Hand

More Info/Options for Cruz Tools 13mm Euro Powerdrive T-Socket Wrench 282149

$21.99 Performance Tool 160-Piece Wire Terminal Assortment 271581
Dennis Kirk Part #: 271581
Performance Tool 160-Piece Wire Terminal Assortment 271581: Manufacturer part # W5213 - Crimp-on wire terminals and splices for any electrical job in a resealable plastic package that measures 8.25" x 4.25" x 1.25". , , Contents , , 4 - 12-10 gauge ring 55-5. 4 - 12-10 gauge ring 55-8. 4 - 12-10 gauge ring 55-10. 5 - 12-10 gauge male connect. 5 - 12-10 gauge female disconnect. 12 - 12-10 gauge butt connect. 8 - 22-18 gauge ring 125-4. 4 - 22-10 gauge quick splice. 12 - 22-18 gauge butt connect. 18 - 18-14 gauge butt connect. 4 - 18-14 gauge quick splice. 10 16-14 gauge ring 2-6. 10 16-14 gauge ring 2-5L. 10 - 16-14 gauge ring 2-4L. 10 - 16-14 gauge male connect. 10 - 16-14 gauge female connect. 10 - 16-14 gauge spade 2-4M. 10 - 16-14 gauge bullet male. 10 - 16-14 gauge bullet female.. W5213
10+ on hand

More Info/Options for Performance Tool 160-Piece Wire Terminal Assortment 271581

$15.99 Performance Tool E-Clip Assortment 271582
Dennis Kirk Part #: 271582
Performance Tool E-Clip Assortment 271582: Manufacturer part # W5208 - Contains 300 assorted E-clips in nine sizes ranging from 1/16" to 7/8". Resealable plastic case.. W5208
10+ on hand

More Info/Options for Performance Tool E-Clip Assortment 271582

$25.99 Performance Tool 407-Piece SAE O-Ring Assortment 271584
Dennis Kirk Part #: 271584
Performance Tool 407-Piece SAE O-Ring Assortment 271584: Manufacturer part # W5202 - Deluxe assortment of 32 different sized O-rings. Contains 407 total pieces from 1/8" to 2" in a 10 1/2" L x 6 1/4" W x 1 3/4" H plastic storage box.. W5202
10+ on hand

More Info/Options for Performance Tool 407-Piece SAE O-Ring Assortment 271584

$84.99 Cruz Tools DMX Fanny Pack Tool Kit 282229
Dennis Kirk Part #: 282229
Cruz Tools DMX Fanny Pack Tool Kit 282229: Manufacturer part # DMX1 - Convenient, trail-ready tool kit. Contains:, 10mm and 12mm box end wrenches, 8mm, 10mm and 12mm 3-way T-handle wrenches, needle-nose-with-wire-cutter pliers, 3 hex keys, four-way screwdriver, three-way PackWrench™, Flashlight, 2 tire levers, and tire gauge. Also includes a roll of electric tape, WD-40®, 5/8 & 3/16 in. plug wrench and handle, plastic zip ties, wire, and a rag. Designed with heavy-duty hardware and mounting straps. Comes with a sturdy 5040-denier nylon carry pouch. Measures 7" x 10". DMX1
6 on Hand

More Info/Options for Cruz Tools DMX Fanny Pack Tool Kit 282229

$15.99 Performance Tool 240-Piece Metric Zinc-Plated Bolt-Nut-Washer Assortment 271586
Dennis Kirk Part #: 271586
Performance Tool 240-Piece Metric Zinc-Plated Bolt-Nut-Washer Assortment 271586: Manufacturer part # W5334 - Includes metric bolts, nuts and washers from 4mm to 10mm diameter in lengths from 12mm to 40mm. Includes an 8.25" x 4.25" x 1.25" resealable plastic case.. W5334
10+ on hand

More Info/Options for Performance Tool 240-Piece Metric Zinc-Plated Bolt-Nut-Washer Assortment 271586

$14.99 Performance Tool Hitch Pin Assortment 271583
Dennis Kirk Part #: 271583
Performance Tool Hitch Pin Assortment 271583: Manufacturer part # W5210 - Kit contains 150 hitch pins from 1 3/16" to 2 15/16" long. Convenient resealable plastic case. , , Contents , , 42 - 3/32 in. x 1 3/16 in. L. 30 - 5/64 in. x 1 5/16 in L. 25 - 5/64 in. x 1 9/16 in. L. 25 - 7/64 in. x 1 5/8 in. L. 20 - 9/64 in. x 1 3/4 in. L. 8 - 5/32 in. x 2 15/16 in. L.. W5210
8 on Hand

More Info/Options for Performance Tool Hitch Pin Assortment 271583

$9.99 Cruz Tools Maxhook Spring Hook 282616
Dennis Kirk Part #: 282616
Cruz Tools Maxhook Spring Hook 282616: Manufacturer part # SH2 - A push-pull spring hook that is both strong and versatile. Plenty of leverage is provided by the PVC-coated T-handle. Hardened steel with CNC-machined tip.. SH2
10+ on hand

More Info/Options for Cruz Tools Maxhook Spring Hook 282616

$39.99 Performance Tool Digital Caliper with Case 282831
Dennis Kirk Part #: 282831
Performance Tool Digital Caliper with Case 282831: 0-6 in. (0-150mm) measurement range with SAE to metric conversion. Can be set to zero at any position. Big LCD display. Can be interfaced with computer or printer. Locking thumb wheel. Chromed satin finish. Fine engraved marking. Tough plastic case keeps caliper clean. Includes battery and on/off switch..
10 on Hand

More Info/Options for Performance Tool Digital Caliper with Case 282831

$28.99 Performance Tool Stubby Tool Set 282455
Dennis Kirk Part #: 282455
Performance Tool Stubby Tool Set 282455: Manufacturer part # W39000 - Versatile 45-piece SAE and metric socket and screwdriver set made from chrome vanadium steel. Short-handled dual-drive ratchet with 1/4" and 3/8" drives and 72 gear teeth for speed and durability. 1/4" and 3/8" drive SAE sockets in sizes in 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8" and 3/4". Metric sockets in sizes 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 and 17mm. Open-end adjustable wrench has a 1" rule on head. Ratcheting screwdriver along with 5/32", 3/16" and 1/4" slotted; #1, #2 and #3 Phillips; T-15 and T-20 star; and 1/8" and 1/4" hex bits. Ratchet, adjustable wrench and screwdriver feature comfortable rubber cushion grip handles. Set includes adapters, extension and a convenient plastic carrying case (10 1/2 in. x 8 in.).. W39000
10+ on hand

More Info/Options for Performance Tool Stubby Tool Set 282455

Socket Tool