Snowmobile Stands

$81.99 CMP Pro-Series Snowmobile Stand 23 1/2 in. High 81501050
Manufacturer: CMP
Dennis Kirk Part #: 28342
CMP Pro-Series Snowmobile Stand 23 1/2 in. High: Manufacturer part # 81501050 - Stands are fabricated of heavy-gauge steel. Full shield blocks debris during warmups. One-piece construction with no hinges or chains. Use for service or storage. , , NOTES:, , Can only be shipped UPS , Long travel suspensions are generally those over 7 in.; if unsure of your suspension order 28-687 intead, or measure the height of your bumper as the back is raised to see how high is must be to pull the track off the ground. 81501050
Expected Soon

More Info/Options for CMP Pro-Series Snowmobile Stand 23 1/2 in. High 81501050

Snowmobile Stands

CLEARANCE!
Was: $102.99
Now: $41.19
Steffes Snowmobile Utility Stand 28 in. 2840
Manufacturer: Steffes
Dennis Kirk Part #: 28685
Steffes Snowmobile Utility Stand 28 in.: Manufacturer part # 2840 - Handles the new extended track sleds with ease. 28" size for long travel and extended track sleds. 22 1/2" wide shield protects from snow and ice. One-inch 16-gauge steel tubing provides super-strong support. Baked-enamel finish resists rust and corrosion.. 2840
More than 10 on hand

More Info/Options for Steffes Snowmobile Utility Stand 28 in. 2840

Snowmobile Stands

$97.99 CMP Snowmobile Lever Lift Stand 91007226
Manufacturer: CMP
Dennis Kirk Part #: 28688
CMP Snowmobile Lever Lift Stand: Manufacturer part # 91007226 - Lifts sled 7" and adjusts from 14" to 23 3/4". Lever-operated, safety locking pin assures secure operation. 19 1/2" wide. Weighs 14 lbs... 91007226
2 on hand

More Info/Options for CMP Snowmobile Lever Lift Stand 91007226

Snowmobile Stands

$40.99 E-Z Traxx Snowmobile Dolly System 1055
Manufacturer: E-Z Traxx
Dennis Kirk Part #: 28450
E-Z Traxx Snowmobile Dolly System: Manufacturer part # 1055 - One high-impact nylon track dolly and two steel ski dollies mean efficient, no-hassle sled moving. Nonskid coating keeps skis from slipping. Easy to use on all hard surfaces. Assembly required. 3" wheels on ski dollies; 2" wheels on track dolly. 1055
More than 10 on hand

More Info/Options for E-Z Traxx Snowmobile Dolly System 1055

Snowmobile Stands

$106.99 E-Z Traxx Snowmobile Lift 1095
Manufacturer: E-Z Traxx
Dennis Kirk Part #: 28485
E-Z Traxx Snowmobile Lift: Manufacturer part # 1095 - Made of durable steel. Features detachable front base. Lifts front or rear of sled for ski and track maintenance. Raises higher than most other lifts. No mast adjustments required. Hooks adjust instantly to any height. 12" maximum lift distance. 300 lb. capacity. Two plastic plugs and latch pin listed in the instructions are not included. 1095
More than 10 on hand

More Info/Options for E-Z Traxx Snowmobile Lift 1095

Snowmobile Stands

$43.99 E-Z Traxx Sled Stand 1070
Manufacturer: E-Z Traxx
Dennis Kirk Part #: 28449
E-Z Traxx Sled Stand: Manufacturer part # 1070 - The simple method for keeping snowmobiles elevated and preventing tracks from freezing to the ground. Removes load from rear suspension during storage. Adjustable stand height fits most snowmobiles. Easy installation -- slide stand under rear lift bar, place hands under channel and lift; stand falls into place. Adjusts to either 22" or 28" tall.. 1070
1 on hand

More Info/Options for E-Z Traxx Sled Stand 1070

Snowmobile Stands

$41.95 Parts Unlimited 27 in. Tri-Snow Stand 22100009
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 282118
Parts Unlimited 27 in. Tri-Snow Stand: Manufacturer part # 22100009 - Secure triangular style snowmobile stand. Rubber coating to resist scratching and rusting. 27" tall with a 14" base.. 22100009
More than 10 on hand

More Info/Options for Parts Unlimited 27 in. Tri-Snow Stand 22100009

Snowmobile Stands

$108.99 Fulton Snowmobile Lift Jack SBL100
Manufacturer: Fulton
Dennis Kirk Part #: 282367
Fulton Snowmobile Lift Jack: Manufacturer part # SBL100 - Smooth and easy-to-operate (five turns per one inch of travel), this is the industry's fastest mechanical screw jack. With 19 in. of travel, ground clearance for even long two-up touring sleds is readily available. Designed for 31 in. maximum lift height; 800 lb. capacity. Heavy-duty lip with vinyl coating for great support with no scratching of the bumper. Locking plate deters theft; brass hitch lock (PART NO. 40-6798) must be purchased separately. Compact, top wind design takes less space in operation or storage. Big 9.7 in. x 10 in. zinc-plated base for stability when a machine is jacked up. Pre-drilled base accepts track studs to keep it from sliding in icy conditions. Black powder-painted outer tube comes with a lift bracket attached.. SBL100
More than 10 on hand

More Info/Options for Fulton Snowmobile Lift Jack SBL100

Snowmobile Stands

$80.99 CMP Lift Stand Wheel Kit 91007834
Manufacturer: CMP
Dennis Kirk Part #: 28666
CMP Lift Stand Wheel Kit: Manufacturer part # 91007834 - Allow easy movement of lift stand on any flat, smooth surface. 270 lbs capacity per wheel (1080 lbs total).. 91007834
Expected Soon

More Info/Options for CMP Lift Stand Wheel Kit 91007834

Snowmobile Stands

$369.99 CMP Lift Stand 91007836
Manufacturer: CMP
Dennis Kirk Part #: 28556
CMP Lift Stand: Manufacturer part # 91007836 - Set up a work station like the pros use-right in your own garage!. Lifts machine up to 24 in. off the floor to gain a better working position. Folds down to 5 in. for storage. 2000 lbs. lift/hold capacity. Cranks up with supplied crank or use an electric drill. Optional wheel kit allows easy movement of lift stand on any flat, smooth surface Order Part No. 28666 , This item only ships via UPS.. 91007836
10 on hand

More Info/Options for CMP Lift Stand 91007836

Snowmobile Stands

$69.95 Moose Aluminum Bike Stands M212M
Manufacturer: Moose
Dennis Kirk Part #: 282621
Moose Aluminum Bike Stands: Manufacturer part # M212M - Platform made from extra-thick aluminum with reinforced side panels and MOOSE RACING USA anti-slip rubber platform pad. Large oil drain hole. Tools, parts or oil catch pan fit in the removable tray. Stable arched base. Measures 17 in. H; top 10 in. x 11 in... M212M
9 on hand

More Info/Options for Moose Aluminum Bike Stands M212M

Snowmobile Stands

$69.95 Moose Aluminum Bike Stands 41010101
Manufacturer: Moose
Dennis Kirk Part #: 282622
Moose Aluminum Bike Stands: Manufacturer part # 41010101 - Platform made from extra-thick aluminum with reinforced side panels and MOOSE RACING USA anti-slip rubber platform pad. Large oil drain hole. Tools, parts or oil catch pan fit in the removable tray. Stable arched base. Measures 17 in. H; top 10 in. x 11 in... 41010101
6 on hand

More Info/Options for Moose Aluminum Bike Stands 41010101

Snowmobile Stands

Snowmobile Stands