Score Card

$125.99 Wild Card Shorty Front 4.75 in. x 21 in. Fender 11368
Manufacturer: Wild Card
Dennis Kirk Part #: 392494
Wild Card Shorty Front 4.75 in. x 21 in. Fender: Manufacturer part # 11368 - Heavy duty shorty front fender for 21 Inch rims, made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw and un-drilled for custom applications. Note: Fender must be prefitted before painting.. 11368
3 on hand

More Info/Options for Wild Card Shorty Front 4.75 in. x 21 in. Fender 11368

Score Card

$175.99 Wild Card Rigid Rear Fender 11396
Manufacturer: Wild Card
Dennis Kirk Part #: 392505
Wild Card Rigid Rear Fender: Manufacturer part # 11396 - Heavy duty right side drive rear fender for Rigid-style frames. Fender is made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one won't split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw, un-trimmed and un-drilled for custom applications. For use with up to 250mm tires, , NOTE: Must be pre-fitted before painting.. 11396
3 on hand

More Info/Options for Wild Card Rigid Rear Fender 11396

Score Card

$184.99 Wild Card Left Side Drive Rigid Rear Fender 11373
Manufacturer: Wild Card
Dennis Kirk Part #: 392497
Wild Card Left Side Drive Rigid Rear Fender: Manufacturer part # 11373 - Heavy duty rear fender for Rigid style frames. Fender is made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the tow piece welded fenders this won't split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw and un-drilled for custom applications, , NOTE: Must be pre-fitted before painting.. 11373
2 on hand

More Info/Options for Wild Card Left Side Drive Rigid Rear Fender 11373

Score Card

$144.99 Wild Card Long Boy Front 5.50 in. x 21 in. Fender 11399
Manufacturer: Wild Card
Dennis Kirk Part #: 392508
Wild Card Long Boy Front 5.50 in. x 21 in. Fender: Manufacturer part # 11399 - Heavy duty front fender made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Note: Fender must be prefitted before painting.. 11399
1 on hand

More Info/Options for Wild Card Long Boy Front 5.50 in. x 21 in. Fender 11399

Score Card

$184.99 Wild Card Rigid Rear Fender Without Chain Cut 11374
Manufacturer: Wild Card
Dennis Kirk Part #: 392498
Wild Card Rigid Rear Fender Without Chain Cut: Manufacturer part # 11374 - Heavy duty rear fender for Rigid style frames. Fender is made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw, untrimmed and un-drilled for custom applications.. , , Must be pre-fitted before painting.. 11374
2 on hand

More Info/Options for Wild Card Rigid Rear Fender Without Chain Cut 11374

Score Card

$144.99 Wild Card Custom 21 Inch Front Fender 11391
Manufacturer: Wild Card
Dennis Kirk Part #: 392502
Wild Card Custom 21 Inch Front Fender: Manufacturer part # 11391 - Ready to be trimmed for a true custom look. One piece construction using heavy-duty 14 guage steel. Fits 19 in. or 21 in. wheels on Narrow Glide front ends, can be used on WIde Glide fron end if spacers are used (spacers not included). Undrilled and untrimmed. Phosphate-etched to help prevent corrosion and to give a good base from primer to adhere to. Sold each. Note: Fender must be prefitted before painting.. 11391
1 on hand

More Info/Options for Wild Card Custom 21 Inch Front Fender 11391

Score Card

$151.99 Wild Card Long Boy Front 4.75 in. x 21 in. Fender 11370
Manufacturer: Wild Card
Dennis Kirk Part #: 392495
Wild Card Long Boy Front 4.75 in. x 21 in. Fender: Manufacturer part # 11370 - Heavy duty front fender made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw and un-drilled for custom applications. Note: Fender must be prefitted before painting.. 11370
1 on hand

More Info/Options for Wild Card Long Boy Front 4.75 in. x 21 in. Fender 11370

Score Card

$138.99 Wild Card Saracen Front Fender 11393
Manufacturer: Wild Card
Dennis Kirk Part #: 392504
Wild Card Saracen Front Fender: Manufacturer part # 11393 - One-piece using heavy-duty 14 gauge steel. Fits 19 in. or 21 in. wheels on Narrow Glide front end. Can be used on Wide Glide front end if spacers are used (not included). Phosphate-etched to help prevent corrosion and to give a good base for primer to adhere to. Undrilled for custom applications. Sold each. Note: Fender must be prefitted before painting.. 11393
4 on hand

More Info/Options for Wild Card Saracen Front Fender 11393

Score Card

$138.99 Wild Card Long Boy Front 4.25 in. x 21 in. Fender 11392
Manufacturer: Wild Card
Dennis Kirk Part #: 392503
Wild Card Long Boy Front 4.25 in. x 21 in. Fender: Manufacturer part # 11392 - Heavy duty front fender made from 0.080 Inch (14 gauge) steel and formed in one piece for added strength. Unlike the two piece welded fenders this one wont split or crack down the middle. The fender has been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Supplied raw, un-trimmed and un-drilled for custom applications. Note: Fender must be prefitted before painting.. 11392
4 on hand

More Info/Options for Wild Card Long Boy Front 4.25 in. x 21 in. Fender 11392

Score Card

$144.99 Wild Card Saracen Front Fender 11402
Manufacturer: Wild Card
Dennis Kirk Part #: 392511
Wild Card Saracen Front Fender: Manufacturer part # 11402 - One-piece using heavy-duty 14 gauge steel. Fits 19 in. or 21 in. wheels on Narrow Glide front end. Can be used on Wide Glide front end if spacers are used (not included). Phosphate-etched to help prevent corrosion and to give a good base for primer to adhere to. Undrilled for custom applications. Sold each. Note: Fender must be prefitted before painting.. 11402
3 on hand

More Info/Options for Wild Card Saracen Front Fender 11402

Score Card

$199.99 Wild Card Rigid Rear Fender without Chain Cut 11414
Manufacturer: Wild Card
Dennis Kirk Part #: 392707
Wild Card Rigid Rear Fender without Chain Cut: Manufacturer part # 11414 - Heavy duty 13.50 in. rear fender for Rigid style frames. Made from 0.080 in. 14 gauge steel. Formed in one piece for added strength, unlike the two piece welded fenders these won't split or crack down the middle. Have been phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. Raw and un-drilled for custom applications. Custom 13.50 in. Rigid rear fender trimmed to length but without chain cut so you can trim it to your own individual taste. Fits Rigid-style frames using up to 300mm wide rear tires.. 11414
2 on hand

More Info/Options for Wild Card Rigid Rear Fender without Chain Cut 11414

Score Card

$741.99 Wild Card One Piece Chopper Square Cut Gas Tank 20180
Manufacturer: Wild Card
Dennis Kirk Part #: 183621
Wild Card One Piece Chopper Square Cut Gas Tank: Manufacturer part # 20180 - One piece chopper custom gas tank with square cut rear. Fits custom application, uses screw in gas cap - not included holds about 4 gallons. No expense was spared in the construction and finish quality of these gas tanks. All visible welds (when mounted on bike) have been finished and polished to give a nice smooth seamless appearance and then phosphate etched to help prevent corrosion and to give a good surface for primers to adhere. The tank is mounted to the frame using the supplied weld on brackets. When the brackets have been installed they mount to the gas tank using a recessed rubber mounting system which isolates it from vibration and gives a nice flush look. Comes with weld to frame brackets, rubbers and mounting hardware, stainless filler bung, stainless 13/16 in. (22mm) petcock outlet and stainless breather tube. , Dimensions: , Overall Length: 23.25 in., Tunnel Length: 23.25 in., Tunnel Width: 2.0 in., Overall Width: 13.50 in., Height: 8.86 in., , NOTE: Before painting these steel gas tanks, we recommend that you mount the tank and check all frame and fork clearances. Gas tanks come with custom mounting including weld on mounting brackets. We recommend a qualified welder mounts the brackets to the frame., NOTE: All gas tanks must be pressure tested, cleaned with tank cleaner and sealer before painting to protect the final finish and prevent internal rusting during winter storage. Always install the gas tank before painting to check fork, triple tree and handlebar control clearances.. 20180
1 on hand

More Info/Options for Wild Card One Piece Chopper Square Cut Gas Tank 20180

Score Card

Score Card