$7.99Novus Polish 3 NOVUS NO 3
Manufacturer: Novus
Dennis Kirk Part #: 301300
Novus Polish 3: Manufacturer part # NOVUS NO 3 - Removes scratches in visors, goggle lenses, windshields and plastic body parts. Novus No. 3 takes out heavy scratches in Lucite® and Plexiglas® surfaces (use both No. 1 and No. 2 for detail polishing). Novus No. 2 - (3186) is a medium-duty formula designed to remove fine scratches, abrasions and haziness. After using Novus No. 2 or No. 3, apply Novus No. 1 - (3185) light-duty formula for a clean, highly polished, static- and dust-free surface. 8 oz bottle. , NOTE: Not recommended for Lexan® and some polycarbonate-coated plastics.. NOVUS NO 3 More than 10 on hand
$14.99Trimax 2 3/4 in. Stainless Steel High-Security Round Padlock TRP170
Manufacturer: Trimax
Dennis Kirk Part #: 406860
Trimax 2 3/4 in. Stainless Steel High-Security Round Padlock: Manufacturer part # TRP170 - Ideal for enclosed trailers, forks, cases with T-Hex chain or cargo boxes. 2 3/4 in. round padlock with 3/8 in. hardened shackle and exclusive armor-plated key core for additional security.. TRP170 Expected Soon
$11.99Show Chrome 3 1/2 in. Round Lampgard Protectors 52-718
Manufacturer: Show Chrome
Dennis Kirk Part #: 211968
Show Chrome 3 1/2 in. Round Lampgard Protectors: Manufacturer part # 52-718 - Cover your driving and fog lights and protect them from road debris. Attach with dual-lock fasteners. Sold in pairs.. 52-718 4 on hand
$296.99Yoshimura RS-3 Round Zyclone Bolt-On with Polished Stainless Steel Muffler Sleeve and Race Baffle CB932SO
Manufacturer: Yoshimura
Dennis Kirk Part #: 449269
Yoshimura RS-3 Round Zyclone Bolt-On with Polished Stainless Steel Muffler Sleeve and Race Baffle: Manufacturer part # CB932SO - Yoshimura is the largest sportbike aftermarket pipe manufacturer in the world. Excellent ground clearance from slim profile muffler. Noise levels are kept down using a two-stage stainless steel baffle that does not restrict exhaust flow. RS-3 slip-on muffler features a hard-mount muffler with no springs. Mounts to OEM mid-pipe. Round body with race baffle. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. CB932SO 1 on hand
$12.95Drag Specialties Smooth Back 3" Round Mirror KA26BC428
Manufacturer: Drag Specialties
Dennis Kirk Part #: H39138
Drag Specialties Smooth Back 3" Round Mirror: Manufacturer part # KA26BC428 - . Bright chrome housings. Sold individually. Glass Size: 3 in. D. Stem Length: 5 in./1 in. to 2 in.. Method of Attachment: 5/16 in.-24 thread.. KA26BC428 8 on hand
$1.99Optronics Inc. 3 in. Round Replacement Reflectors RE21RS
Manufacturer: Optronics Inc.
Dennis Kirk Part #: 212745
Optronics Inc. 3 in. Round Replacement Reflectors: Manufacturer part # RE21RS - DOT/SAE/FMVSS/CMVSS approved. Side markers use snap-in installation. Reflectors use self-adhesive and two screw holes for installation.. RE21RS 5 on hand
$97.99Hitech Round LED Flush Mount 3 in. PSC219RP
Manufacturer: Hitech
Dennis Kirk Part #: H21464
Hitech Round LED Flush Mount 3 in.: Manufacturer part # PSC219RP - Red prismatic lens. For ease of custom installation, lenses are not attached to lights. Light measurements are based on the size of the lens; light housings are larger. Like other LEDs, these lights are brighter and last longer than standard lights. Not DOT approved; recommended for show or off-road use only. Made in the U.S.A... PSC219RP 1 on hand
$36.99Candlepower Quartz Round Light-5 3/4 in. H402212
Manufacturer: Candlepower
Dennis Kirk Part #: 2236
Candlepower Quartz Round Light-5 3/4 in.: Manufacturer part # H402212 - 12-volt quartz halogen lights manufactured by Candlepower come complete with H-4 P43T 60/55W bulbs. Twice the illumination of standard sealed beams. , , There are no mounting brackets or holes on the outside edge of this headlight for mounting therefore this will not fit models that require it.. H402212 6 on hand
$352.99Dakota Digital 3 3/8 in. Round Gauge HLY3401
Manufacturer: Dakota Digital
Dennis Kirk Part #: 407329
Dakota Digital 3 3/8 in. Round Gauge: Manufacturer part # HLY3401 - Gauge measures 0-300 degree F/0-150 degree C. Resolution: 1 degree/1 degree C. Features chrome front bezel, non-glare, anti-scratch lens and machined aluminum housing. For use with 407172 or 407333. , , 407621 Chrome Mounting Cup for 3-3/8 in. Gauges, 407623 Raw Steel Mounting Cup for 3-3/8 in. Gauges, 407617 1 in. Handlebar Clamp for 3-3/8 in. Mounting Cup, 407618 1-1/4 in. Handlebar Clamp for 3-3/8 in. Mounting Cup, 407619 1-1/2 in. Handlebar Clamp for 3-3/8 in. Mounting Cup. HLY3401 1 on hand
$364.95Python 3 1/2 in. Round Slip-On Mufflers 41505
Manufacturer: Python
Dennis Kirk Part #: 4402417
Python 3 1/2 in. Round Slip-On Mufflers: Manufacturer part # 41505 - Maximum protection from heat discoloration. High-velocity shielded muffler cores (replacement core-4402276). Big-time performance gains. Python logo on each muffler. Removable baffles. Slash-cut ends. , Included Items: , 1. (1) Python dresser right hand muff, 2. (1) Python dresser left hand muff, 3. (2) 5/16-18 x 1 1/4 in. hex head zinc plated grade 5 bolt, 4. (2) HD muffler clamp chromed, 5. (2) 5/16-18 all metal loc nut, 6. (4) 5/16 SAE flat washer. 41505 2 on hand
$74.95Python Replace Baffle for 3 1/2 in. Round Slip-On Mufflers A386R
Manufacturer: Python
Dennis Kirk Part #: 4402276
Python Replace Baffle for 3 1/2 in. Round Slip-On Mufflers: Manufacturer part # A386R - Replacement baffle for our Part No. H43-223 and 44-02417.. A386R 1 on hand
$92.99Pingel Smooth Power-Flo Fuel Valve- Backward Facing 90 degree 3/8 in. NPT Round 4211CR
Manufacturer: Pingel
Dennis Kirk Part #: H18155
Pingel Smooth Power-Flo Fuel Valve- Backward Facing 90 degree 3/8 in. NPT Round: Manufacturer part # 4211CR - The highest fuel flow available on the market. Allows an amazing 76 ounces per minute as compared to 28 ounces per minute with a stock valve. Designed for use on machines with engine modifications. Available in two styles: 75-06 models with a 22mm external thread or pre-75 tanks internally threaded for 3/8 in. NPT. All outlet nipples are 5/16 in. o.d.. These valves and their design are trademarks of Pingel Enterprise, Inc.. Made in the U.S.A.. NOTE: Not for fuel-injected models Following models must use adapter part number 181575 Yamaha YZF-R1 1000 98-03 (all) , NOTE: , All descriptions are made from a seated position on the motorcycle with a reference from nozzle position to the reserve position of the petcock lever, , NOTE: , 90° styles have the outlet nipple 90° to the shut-off valve. 180° styles have the outlet nipple straight across or 180° from the shut-off valve. Nipple down styles have the outlet nipple straight across or 180° from the shut-off valve, , NOTE: , Pingel Fuel Delivery Systems are covered under one or more of the following patents: 4,957,138; D330,712; D363-533; D363-762; D408-069; D408-500; D408-894; D409-724; D410-734; M9505991.1; M9502099.3; other patents pending. 4211CR 2 on hand
