$436.99Samson Rolled Thunder Slash-Cut Mufflers M-140
Manufacturer: Samson
Dennis Kirk Part #: H251424
Samson Rolled Thunder Slash-Cut Mufflers: Manufacturer part # M-140 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. , INCLUDED ITEMS: , One left muffler, One right muffler, Four 5/16 in. nylock nuts, Four 5/16 in. x 1 in. carriage bolts, Four 5/16 in. lock washers, Four 7/16 in. chrome spacers, One instruction sheet, , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models (except 08 Touring models). M-140 1 on hand
$436.99Samson Rolled Thunder 28 in. Oval Muffler M-136
Manufacturer: Samson
Dennis Kirk Part #: H251421
Samson Rolled Thunder 28 in. Oval Muffler: Manufacturer part # M-136 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold as pairs. , INCLUDED ITEMS: , Two mufflers, Four 5/16 in.-18 x 3/4 in. hex head bolts, Four 5/16 in. lock washers, One instruction sheet, , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models (except 08 Touring models). M-136 3 on hand
$436.99Samson Rolled Thunder Oval Miter-Cut Mufflers M-147
Manufacturer: Samson
Dennis Kirk Part #: H441231
Samson Rolled Thunder Oval Miter-Cut Mufflers: Manufacturer part # M-147 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. , INCLUDED ITEMS: , Two mufflers, Four 5/16 in.-18 x 3/4 in. hex head bolts, Four 5/16 in. lock washers, One instruction sheet, , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models (except 08 Touring models). M-147 1 on hand
$436.99Samson Rolled Thunder Oval Slant-Cut Mufflers M-148
Manufacturer: Samson
Dennis Kirk Part #: H441232
Samson Rolled Thunder Oval Slant-Cut Mufflers: Manufacturer part # M-148 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. , INCLUDED ITEMS: , Two mufflers, Four 5/16 in.-18 x 3/4 in hex head bolts, Four 5/16 in. lock washers, One instruction sheet, , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models (except 08 Touring models). M-148 1 on hand
$436.99Samson Rolled Thunder Slant-Cut Mufflers M-138
Manufacturer: Samson
Dennis Kirk Part #: H251423
Samson Rolled Thunder Slant-Cut Mufflers: Manufacturer part # M-138 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. , INCLUDED ITEMS: , Two mufflers, Four 5/16 in.-18 x 3/4 in. hex head bolts, Four 5/16 in. lock washers, One instruction sheet, , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models (except 08 Touring models). M-138 1 on hand
$436.99Samson Rolled Thunder Miter-cut Mufflers M-142
Manufacturer: Samson
Dennis Kirk Part #: H251426
Samson Rolled Thunder Miter-cut Mufflers: Manufacturer part # M-142 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. , INCLUDED ITEMS: , Two mufflers, Four 5/16 in.-18 x 3/4 in. hex head bolts, Four 5/16 in. lock washers, One instruction sheet, , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models (except 08 Touring models). M-142 1 on hand
$436.99Samson Rolled Thunder Straight-Cut Mufflers M-144
Manufacturer: Samson
Dennis Kirk Part #: H251428
Samson Rolled Thunder Straight-Cut Mufflers: Manufacturer part # M-144 - These mufflers feature a rolled edge that gives a refined, finished appearance to your dresser. Non-removable baffles are free-flowing for big power and big sound. Mufflers measure 28 in. overall. Made in the U.S.A.. Sold in pairs. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models (except 08 Touring models). M-144 1 on hand
$33.99Saddlemen R850 Roll Bag 35150074
Manufacturer: Saddlemen
Dennis Kirk Part #: 506844
Saddlemen R850 Roll Bag: Manufacturer part # 35150074 - Installs on top of any Saddlemen SaddleStow sissy bar bag. Features a versatile mounting system for mounting on luggage rack, back seat or sissy bar and clips onto most Saddlemen touring bags. Fully rigid so it looks great empty or full. Top carry handle and shoulder strap included for easy carrying off bike. Constructed of UV-, water- and weather-resistant 1200-denier SaddleTuff. Dimensions: 14 in. x 8.5 in. x 8.5 in.; measures 850 cubic inches.. 35150074 More than 10 on hand
$61.99Saddlemen R1300LXE Deluxe Roll Bag 35150075
Manufacturer: Saddlemen
Dennis Kirk Part #: 506845
Saddlemen R1300LXE Deluxe Roll Bag: Manufacturer part # 35150075 - Features a versatile mounting system to install on luggage rack, back seat or sissy bar and clips onto most Saddlemen touring bags. Multiple D-rings for easy mounting options on hard-to-fit motorcycles. Fully rigid, so it looks great empty or full. Features a wide top opening for easy packing, lockable zipper pulls, top carry handle and shoulder strap for easy carrying off bike. Constructed of fully UV-, water- and weather-resistant 1200-denier SaddleTuff and leather-like vinyl panels. Dimensions: unexpanded 16 in. L x 10 in. W x 9.5 H in., expanded 20 in. L x 10 in. W x 9.5 in. H; measures 1,300 cubic inches.. 35150075 More than 10 on hand
$53.95T-Bags Replacement Top Roll for Part No. 50-5076 and 50-5078 TBU210R
Manufacturer: T-Bags
Dennis Kirk Part #: 505077
T-Bags Replacement Top Roll for Part No. 50-5076 and 50-5078: Manufacturer part # TBU210R - Roll Bag dimensions are 14 in. W x 10 in. D with a carrying capacity of 1/2 cu. ft.
1 on hand
$28.95T-Bags Replacement 10 in. Top Roll TB3000TRE
Manufacturer: T-Bags
Dennis Kirk Part #: H500857
T-Bags Replacement 10 in. Top Roll: Manufacturer part # TB3000TRE - Adjustable top webs are exact replacements for T-Bags Original and Expandable (100/200 series) or T-Bags Lonestar (300 series). 10 in. roll bag is exact replacement for 14 in. L x 10 in. D T-Bags Roll Bag on many models.. TB3000TRE 3 on hand
$131.95T-Bags Saddle Roll w/Liner TBU650
Manufacturer: T-Bags
Dennis Kirk Part #: 505080
T-Bags Saddle Roll w/Liner: Manufacturer part # TBU650 - Ideal for everyday trips. Featurs a rigid dual-wall construction so it retains its shape even when empty. Insulated with high-density closed-cell foam. Quick-release security straps. Luggage rack required. Fits Route 66 T-Bag, our Part No. 50-5075. Dimensions: 16 1/2 in. W x 9 in. dia. Roll bag does not have built-in bungee-bottom external rain cover, this does include Internal Rain Liner.. TBU650 8 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
