$46.99Maxxis Razr Cross Tire M958 RAZR CROSS
Manufacturer: Maxxis
Dennis Kirk Part #: 653083
Maxxis Razr Cross Tire: Manufacturer part # M958 RAZR CROSS - Developed specifically for ATV motocross. Ideal choice for intermediate/loamy track conditions. Angled tread knobs on rear offer excellent traction while allowing controlled slides for cornering. Front tire combines aggressive center line tread with angled outer knobs for precise steering, straight line stability and improved braking.. M958 RAZR CROSS 4 on hand
$57.99Maxxis Razr Cross Tire M958 RAZR CROSS 653084
Manufacturer: Maxxis
Dennis Kirk Part #: 653084
Maxxis Razr Cross Tire: Manufacturer part # M958 RAZR CROSS - DennisKirk Part # 653084 - Developed specifically for ATV motocross. Ideal choice for intermediate/loamy track conditions. Angled tread knobs on rear offer excellent traction while allowing controlled slides for cornering. Front tire combines aggressive center line tread with angled outer knobs for precise steering, straight line stability and improved braking. DIMENSIONS, Inflated Width/Measuring Rim Width: 10 in./ Not specified, Inflated Diameter: 18 in., Acceptable Rim Width(s): Not Specified, Deepest Tread Depth: 16/32 in., Balance DOT: No, Directional Arrow: No, , CAPACITIES AND CONSTRUCTION, Bias or Radial Ply: Bias, Load Capacity: Not Specified, Maximum Inflation Pressure to Seat Bead: 36 PSI, Maximum Operating Pressure: Not Specified, Tread Plies/Material: Not Specified, Sidewall Plies/Material: Not Specified, DOT Approved for Road Use: No, Tube or Tubeless: Yes-Either, Wheel Recommendation (from sidewall): None. M958 RAZR CROSS 2 on hand
$47.99Maxxis Razr Cross Tire M957 RAZR CROSS
Manufacturer: Maxxis
Dennis Kirk Part #: 653085
Maxxis Razr Cross Tire: Manufacturer part # M957 RAZR CROSS - Developed specifically for ATV motocross. Ideal choice for intermediate/loamy track conditions. Angled tread knobs on rear offer excellent traction while allowing controlled slides for cornering. Front tire combines aggressive center line tread with angled outer knobs for precise steering, straight line stability and improved braking.. M957 RAZR CROSS 4 on hand
$51.99Maxxis Razr Cross Tire M957 RAZR CROSS 653086
Manufacturer: Maxxis
Dennis Kirk Part #: 653086
Maxxis Razr Cross Tire: Manufacturer part # M957 RAZR CROSS - DennisKirk Part # 653086 - Developed specifically for ATV motocross. Ideal choice for intermediate/loamy track conditions. Angled tread knobs on rear offer excellent traction while allowing controlled slides for cornering. Front tire combines aggressive center line tread with angled outer knobs for precise steering, straight line stability and improved braking. DIMENSIONS, Inflated Width/Measuring Rim Width: 6 in./Not Specified, Inflated Diameter: 20 in., Acceptable Rim Widths: Not Specified, Deepest Tread Depth: 16/32 in., Balance DOT: No, Directional Arrow: No, , CAPACITIES AND CONSTRUCTION, Bias or Radial Ply: Bias, Load Capacity: Not Specified, Maximum Inflation Pressure to Seat Bead: 36 PSI, Maximum Operating Pressure: Not Specified, Tread Plies/Material: Not Specified, Sidewall Plies/Materail, DOT Approved for Road Use: No, Tube or Tubeless: Yes-Either, Wheel Recommendation (from sidewall): None. M957 RAZR CROSS 5 on hand
$2.99DID 428 NZ Off Road Clip Connecting Link p112422
Manufacturer: DID
Dennis Kirk Part #: 112422
DID 428 NZ Off Road Clip Connecting Link: Manufacturer part # p112422 - Replacement connecting link for 428NZ chains.. p112422 2 on hand
$59.99DID 428 NZ Off Road Series Drive Chain p112418130
Manufacturer: DID
Dennis Kirk Part #: 112418130
DID 428 NZ Off Road Series Drive Chain: Manufacturer part # p112418130 - DAI-HARD (DHA) SERIES NON-O-RING CHAIN (NZ) D.I.D.'s professional high-performance non-O-ring chain. DHA pin treatment: hard chromium-carbide layer formed on pin surface. Far better wear-resistance than other chains. Up to 19 percent higher tensile strength. Increased anti-oxidation performance. Solid bushings, quad-riveted pins. , Includes a Clip Type Master Link , , Replacement connecting link:, Clip-Type: part no. 11-2424.. p112418130 2 on hand
$13.95Parts Unlimited Universal Limiter Strap TS24ULS
Manufacturer: Parts Unlimited
Dennis Kirk Part #: 04514
Parts Unlimited Universal Limiter Strap: Manufacturer part # TS24ULS - Universal strap will fit 97 and newer sleds, plus most earlier machines. For race sleds, strap can be used as the mandated snow flap fastener. Constructed of heavy-duty re-enforced rubber for ultimate durability in the cold, wet and chemicals sleds are exposed to. Each kit includes: one 24" re-enforced rubber strap with 2 stainless steel bolts, 2 stainless steel locking nuts and 4 stainless steel washers. Strap is not pre-drilled which which makes it easy to use in any application. To replace an old limiter strap simply lay it over the universal strap and drill.. TS24ULS More than 10 on hand
$37.99Schampa Dirtskins Front and Rear Shock Covers-Maltese Cross Pattern DS011K
Manufacturer: Schampa
Dennis Kirk Part #: 588491
Schampa Dirtskins Front and Rear Shock Covers-Maltese Cross Pattern: Manufacturer part # DS011K - Protects suspension components from debris. Made of tough 2mm neoprene. Installation is quick and easy with hook-and-loop material. Sold in a set (2 front, 1 rear).. DS011K 1 on hand
$27.95SBS LF Off-Road Ceramic Brake Pads p199777
Manufacturer: SBS
Dennis Kirk Part #: 199777
SBS LF Off-Road Ceramic Brake Pads: Manufacturer part # p199777 - Parts Unlimited brake pads by SBS offer asbestos-free brakes using patented Unified Composite Technology to create tomorrow's advanced brake systems for today's motorcycles. UCT technology completely blends all brake pad materials into a balanced, unified pad. This balance ensures no hot spots, glazing, premature fading or excessive rotor wear. The result is powerful, fade-free braking performance -- even in extreme conditions. , OFF-ROAD CERAMIC, Designed to perform flawlessly on off-road bikes not factory-equipped with sintered metal pads. LF rears deliver ultimate stopping power in all riding conditions. As with all SBS compounds, Off-Road Ceramic is formulated using a UCT blending process from organic, asbestos-free compounds to provide excellent stopping power and pad longevity. Tested and approved in compliance with strict European regulations. Off-Road Ceramic pads can replace sintered pads; however, Off-Road Sintered pads are highly recommended. , NOTE: All brake pads and shoes are sold in a set for one disc or drum. Order one set for each disc or drum on your machine, NOTE: Never use sintered metal or RSI-type brake pads in bikes originally equipped with non-sintered pads. Check your owner's manual to see if sintered metal brakes were original equipment on your machine.. p199777 1 on hand
$1026.99Lonestar Racing Cross Country Long Travel A-Arm p552691
Manufacturer: Lonestar Racing
Dennis Kirk Part #: 552692
Lonestar Racing Cross Country Long Travel A-Arm: Manufacturer part # p552691 - Designed specifically for Cross Country racing. Constructed of 4130 Chromoly and TIG welded, these strong, lightweight A-arms dramatically improve the handling and stability of your quad. 1/2in. wider than stock and 3/4in. forward. Adjustable camber and caster. Include stainless steel tie-rods. A-arms perform best with a shock and axle upgrade; may not use OEM shocks. Honda A-arms must use a 18.25in. long shock; Yamaha A-Arms must use a 16.75in. long shock.. p552691 1 on hand
$13.99Pro Grip Model 799 Gel Cross Grips 799
Manufacturer: Pro Grip
Dennis Kirk Part #: 592410
Pro Grip Model 799 Gel Cross Grips: Manufacturer part # 799 - New grips with the best of both worlds-firm on the inside, gel on the outside. More comfortable because they are contoured for fingers. For 7/8 in. handlebars and twist throttles. 125mm long.. 799 9 on hand
$13.99Pro Grip Firm 45 Base Model 798 Cross Grips 798
Manufacturer: Pro Grip
Dennis Kirk Part #: 591820
Pro Grip Firm 45 Base Model 798 Cross Grips: Manufacturer part # 798 - A revolutionary design featuring a dual flange against the side of the hand that increases comfort dramatically. Thermo-molded gel system in the palm area conforms to the hand when pressure is applied. Reduced Vibration Gel System cuts vibration in half. Available in 45 or 35 durometer hardness base; both include 10 durometer soft gel system in palm area. For twist throttles.. 798 4 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
