$85.95J&M Corporation Replacement Rear Speakers HCUR-06
Manufacturer: J&M Corporation
Dennis Kirk Part #: 407582
J&M Corporation Replacement Rear Speakers: Manufacturer part # HCUR-06 - Upgrades rear speakers to the quality of J&M front speakers. High-performance speakers are direct replacement for factory speakers. Sold in pairs.. HCUR-06 2 on hand
$86.99Show Chrome Neodymium Rear Speaker Kit 52-767
Manufacturer: Show Chrome
Dennis Kirk Part #: 407657
Show Chrome Neodymium Rear Speaker Kit: Manufacturer part # 52-767 - Lightweight, water-resistant, two-way speakers with Butyl rubber surround, suspended tweeter and plastic cone. 30W at 3 ohm; 0.8 ohm tweeter. Measure 4 1/2 in. dia. x 2 1/4 in. D. Kit includes wiring harness.. 52-767 1 on hand
$53.99Show Chrome Rear Speaker Kit 52-607
Manufacturer: Show Chrome
Dennis Kirk Part #: 40777
Show Chrome Rear Speaker Kit: Manufacturer part # 52-607 - Withstands more abuse from the weather than OEM speakers, yet matches them in sound quality. Can handle up to 30 watts. Plugs directly into Honda GL1800 Gold Wing 01-02 OEM audio system.. 52-607 3 on hand
$99.95J&M Corporation Rear Speaker Kit Complete w/Harness RRSK-GL18
Manufacturer: J&M Corporation
Dennis Kirk Part #: 407586
J&M Corporation Rear Speaker Kit Complete w/Harness: Manufacturer part # RRSK-GL18 - Manufactured as exact replacements for the stock units, both front and rear, as installed on the GL1800 and front and rear for the GL1500. Designed for the specific power levels of the Gold Wing's audio system to deliver maximum output and fidelity. 3 ohms impedance and 100+ watts power. Mylar/aluminum waterproof cone construction makes them impervious to the weather and repeated trips to the carwash. Complete kit includes wiring harness that plugs into the factory wiring harness plug located under the seat. Sold in pairs.. RRSK-GL18 1 on hand
$319.95Moose Rear Speaker Bar 1427
Manufacturer: Moose
Dennis Kirk Part #: 407410
Moose Rear Speaker Bar: Manufacturer part # 1427 - Durable, foam filled with stainless steel mounting plates and cover. Comes with prewired 60-watt speakers. Features snap-on net storage areas. Easily mounts to roll cage with no drilling. INCLUDED ITEMS: One speaker bar. One speaker bar retaining cap. Two cargo nets. One M10 x 90 large socket head cap screw. Two 25mm outside diameter flater washers. One M10 nylock nut. Six black cable ties. One instruction sheet.. 1427 1 on hand
$94.99Hogtunes 2 ohm Rear Speakers 1017-AA
Manufacturer: Hogtunes
Dennis Kirk Part #: 407463
Hogtunes 2 ohm Rear Speakers: Manufacturer part # 1017-AA - Wire-in direct using OEM connectors, no cutting required. The tailored sound for highway speeds and the perfect fit come from the custom-tooled speaker baskets. Includes oversized magnet assemblies, aluminum voice coil formers, ultra-light polypropylene woofer cones and titanium-impregnated neodymium tweeters. 45W RMS/90 peaks watts. Sold in pairs. , , NOTE: For FLHT, FLHX and FLTR 06-07 models with Harman/Kardon advanced Audio systems. 1017-AA 1 on hand
$75.99J&M Corporation Replacement Rear Speakers HCUR98
Manufacturer: J&M Corporation
Dennis Kirk Part #: H40208
J&M Corporation Replacement Rear Speakers: Manufacturer part # HCUR98 - Upgrades your rear speakers to the unrivaled quality of J&M speakers; sold in pairs. Direct replacements for factory speakers. Made specifically for 98-05 FLHTCU/I models only.. HCUR98 1 on hand
$29.95Drag Specialties Rear Speaker Grilles 44050130
Manufacturer: Drag Specialties
Dennis Kirk Part #: 407729
Drag Specialties Rear Speaker Grilles: Manufacturer part # 44050130 - Chrome-plated grilles for front or rear speakers. Includes two-sided adhesive tape for mounting. Sold in pairs.. 44050130 4 on hand
$69.95J&M Corporation Replacement Fairing/Rear Speakers RSPA-GL18
Manufacturer: J&M Corporation
Dennis Kirk Part #: 407585
J&M Corporation Replacement Fairing/Rear Speakers: Manufacturer part # RSPA-GL18 - Manufactured as exact replacements for the stock units, both front and rear, as installed on the GL1800 and front and rear for the GL1500. Designed for the specific power levels of the Gold Wing's audio system to deliver maximum output and fidelity. 3 ohms impedance and 100+ watts power. Mylar/aluminum waterproof cone construction makes them impervious to the weather and repeated trips to the carwash. Complete kit includes wiring harness that plugs into the factory wiring harness plug located under the seat. Sold in pairs.. RSPA-GL18 1 on hand
$577.99GMA Engineering Chrome Finish Millenium Series 4-Piston Rear Caliper p197308
Manufacturer: GMA Engineering
Dennis Kirk Part #: 197308
GMA Engineering Chrome Finish Millenium Series 4-Piston Rear Caliper: Manufacturer part # p197308 - Add style and shine to a high-visibility area. Made of hand polished, aircraft-quality 6061 T-6S aluminum. Beautiful chrome finish The chrome plating of billet aluminum is a difficult and demanding process; every effort has been made to ensure compatibility and provide quality chrome parts. Made in the U.S.A... p197308 2 on hand