$296.99GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper GMA115
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191673
GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper: Manufacturer part # GMA115 - Beautiful and functional. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Brake pads are included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For replacement rear brake pads use:, 1900462 - GMA pads (set of 2), 193135 - SBS pads (set of 2), H19847 or 191610 - DP pads (set of 2). GMA115 1 on hand
$360.99GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper GMAR10
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191675
GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper: Manufacturer part # GMAR10 - Beautiful and functional. Fits all rigid frames with 10" rotor. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Includes correct axle spacer, anti-rotation anchor arm, mounting bracket and hardware. Brake pads are also included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For replacement rear brake pads use:, 1900462 - GMA pads (set of 2), 193135 - SBS pads (set of 2), H19847 or 191610 - DP pads (set of 2). GMAR10 1 on hand
$309.99GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper GMA103SA
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191672
GMA Engineering Custom Billet Aluminum Rear 2-Piston Brake Caliper: Manufacturer part # GMA103SA - Beautiful and functional. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Brake pads are included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For replacement rear brake pads use:, 1900462 - GMA pads (set of 2), 193135 - SBS pads (set of 2), H19847 or 191610 - DP pads (set of 2). GMA103SA 1 on hand
$296.99GMA Engineering Custom Billet Aluminum Rear Brake 2-Piston Caliper GMAR10CC
Manufacturer: GMA Engineering
Dennis Kirk Part #: 1900459
GMA Engineering Custom Billet Aluminum Rear Brake 2-Piston Caliper: Manufacturer part # GMAR10CC - Beautiful and functional. Fits all rigid frames with 10" rotor. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Includes correct axle spacer, anti-rotation anchor arm, mounting bracket and hardware. Brake pads are also included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For rigid frames with 10 in. rotor, NOTE: For replacement rear brake pads use:, 1900462 - GMA pads (set of 2), 193135 - SBS pads (set of 2), H19847 or 191610 - DP pads (set of 2). GMAR10CC 1 on hand
$328.99Russ Wernimont Designs Custom Rigid 8 1/2 in. Rear Fender DS-380625
Manufacturer: Russ Wernimont Designs
Dennis Kirk Part #: 392515
Russ Wernimont Designs Custom Rigid 8 1/2 in. Rear Fender: Manufacturer part # DS-380625 - 9000R for left-side drive Heavy-gauge steel construction. Each fender is inspected personally by a master fender builder to assure straightness, consistency and a flawless finish with an absolute minimum of finishing bodywork. Fender comes undrilled so you can position them to look and work best for your application. Handmade in the U.S.A., , Note: Fender must be prefitted before painting. DS-380625 1 on hand
$202.99Arlen Ness 8 1/2 in. Wide Trimmed Taildragger Rear Fender 06-186
Manufacturer: Arlen Ness
Dennis Kirk Part #: H39022
Arlen Ness 8 1/2 in. Wide Trimmed Taildragger Rear Fender: Manufacturer part # 06-186 - One of the most popular and recognized fiberglass fenders of the 90s. Trimmed style simplifies installation on custom applications. Made in the U.S.A.. , , Must be pre-fitted before painting.. 06-186 2 on hand
$188.99Arlen Ness 7 1/2 in. Wide Legacy Rear Fender 06-070
Manufacturer: Arlen Ness
Dennis Kirk Part #: H39086
Arlen Ness 7 1/2 in. Wide Legacy Rear Fender: Manufacturer part # 06-070 - Dynamic fiberglass fenders from Arlen Ness. Approximately 4 in. longer than stock FLSTC fender at the rear. Features longer skirting for a dressy look. Made in the U.S.A., , NOTE: Must be pre-fitted before painting.. 06-070 1 on hand
$188.99Arlen Ness 8 1/2 in. Wide Legacy Rear Fender 06-071
Manufacturer: Arlen Ness
Dennis Kirk Part #: H39025
Arlen Ness 8 1/2 in. Wide Legacy Rear Fender: Manufacturer part # 06-071 - Dynamic fiberglass fenders from Arlen Ness. Approximately 4 in. longer than stock FLSTC fender at the rear. Features longer skirting for a dressy look. Made in the U.S.A.. , , Must be pre-fitted before painting.. 06-071 1 on hand
$577.99GMA Engineering Chrome Finish Millenium Series 4-Piston Rear Caliper p197308
Manufacturer: GMA Engineering
Dennis Kirk Part #: 197308
GMA Engineering Chrome Finish Millenium Series 4-Piston Rear Caliper: Manufacturer part # p197308 - Add style and shine to a high-visibility area. Made of hand polished, aircraft-quality 6061 T-6S aluminum. Beautiful chrome finish The chrome plating of billet aluminum is a difficult and demanding process; every effort has been made to ensure compatibility and provide quality chrome parts. Made in the U.S.A... p197308 2 on hand
$311.99GMA Engineering Billet aluminum rear brake caliper, each GMA204
Manufacturer: GMA Engineering
Dennis Kirk Part #: H19061
GMA Engineering Billet aluminum rear brake caliper, each: Manufacturer part # GMA204 - Beautiful and functional. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Brake pads are included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For replacement rear brake pads use:, 193141 - SBS pads (set of 2), H192501 - GMA pads (set of 2). GMA204 2 on hand
$306.99GMA Engineering Billet aluminum rear brake caliper, each GMA201ST
Manufacturer: GMA Engineering
Dennis Kirk Part #: H191671
GMA Engineering Billet aluminum rear brake caliper, each: Manufacturer part # GMA201ST - Beautiful and functional. Superb billet aluminum design with a clear anodized finish. Hanger brackets and hardware included. 2- and 4-piston calipers fit a wide variety of H-D models (including rigid frames). Brake pads are included. Made in the U.S.A.. , NOTE: Not recommended for use with imported stainless steel rotors., NOTE: For replacement rear brake pads use:, 193141 - SBS pads (set of 2), H192501 - GMA pads (set of 2). GMA201ST 1 on hand
$563.99GMA Engineering Millenium Series 4-Piston Rear Calipers GMAFLTMC
Manufacturer: GMA Engineering
Dennis Kirk Part #: 1900246
GMA Engineering Millenium Series 4-Piston Rear Calipers: Manufacturer part # GMAFLTMC - Add style and shine to a high-visibility area. Made of high-quality 6061 T-6S aluminum. Made in the U.S.A... GMAFLTMC 2 on hand
