|
|
$97.99
High Lifter Wide Trac Rear 1 1/2 in. Atv Wheel Spacers WT4415
Manufacturer: High Lifter
Dennis Kirk Part #: 55993
High Lifter Wide Trac Rear 1 1/2 in. Atv Wheel Spacers : Manufacturer part # WT4415 - Move ATV wheels slightly out from the hubs and shocks. Increased width means increased stability. Extend wheels outside the rut for better traction and a higher ride. Allow for the installation of larger, aftermarket tires without rubbing against shocks, struts or exhaust systems. Machined from aircraft grade 6061 billet aluminum. enough for two wheels. NOTE: No OEM studs are required to be removed from the ATV, and stud extenders are not used. Wide Tracs bolt to existing studs and the wheel is then bolted to the grade 8 Wide Trac stud (included). This design is the strongest available to ATVs and is comparable to automotive grade wheel adapters.. WT4415
1 on hand
More Info/Options for High Lifter Wide Trac Rear 1 1/2 in. Atv Wheel Spacers WT4415
Rear 1
|
|
|
|
$207.99
Wild 1 Inc. Chubby 8 1/2 in. Baby Ape Hanger Bar WO513
Manufacturer: Wild 1 Inc.
Dennis Kirk Part #: 595074
Wild 1 Inc. Chubby 8 1/2 in. Baby Ape Hanger Bar: Manufacturer part # WO513 - These 1 1/4 in. diameter handlebars are 25% thicker than stock handlebars. Designed with fluid bends at precise angles to provide maximum comfort and control. Pre-drilled for internal wiring and feature a dimpled and diamond knurled design in a show-chromed finish. Work with stock and most custom controls, stock risers and top clamps. Made in the U.S.A... WO513
Expected Soon
More Info/Options for Wild 1 Inc. Chubby 8 1/2 in. Baby Ape Hanger Bar WO513
Rear 1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$92.95
Drag Specialties 7 1/4 in. Wide Rear Fender DS380064
Manufacturer: Drag Specialties
Dennis Kirk Part #: H390687
Drag Specialties 7 1/4 in. Wide Rear Fender: Manufacturer part # DS380064 - Steel construction. Pre-drilled for easy installation and accepts the OEM taillight assembly or Drag Specialties taillight bracket, Part No. H21050. Direct replacement for rear fender found on all 84-96 FXST models. Fenders measure approx. 7 1/4 in. wide, , NOTE: Replaces OEM number 59914-86A, , NOTE: All fenders must be prefitted before painting. DS380064
2 on hand
More Info/Options for Drag Specialties 7 1/4 in. Wide Rear Fender DS380064
Rear 1
|
|
|
|
$226.99
Sumax LoBoy Sweeper 7 1/4 in. Rear Fender 8655
Manufacturer: Sumax
Dennis Kirk Part #: 392518
Sumax LoBoy Sweeper 7 1/4 in. Rear Fender: Manufacturer part # 8655 - Made from space-age materials that are lighter and stronger than any fiberglass. Not predrilled, so you can put them in any stance you want. Glassed-in convoluted tubing makes it simple and easy to wire the taillight like a pro. Prime and paint with minimal prep work. Made in the U.S.A.. , , Must be pre-fitted before painting.. 8655
1 on hand
More Info/Options for Sumax LoBoy Sweeper 7 1/4 in. Rear Fender 8655
Rear 1
|
|
|
|
$181.99
Sumax LoBoy FatBob 8 1/4 in. Rear Fender 8657
Manufacturer: Sumax
Dennis Kirk Part #: 392525
Sumax LoBoy FatBob 8 1/4 in. Rear Fender: Manufacturer part # 8657 - Made from space-age materials that are lighter and stronger than any fiberglass. Not predrilled, so you can put them in any stance you want. Glassed-in convoluted tubing makes it simple and easy to wire the taillight like a pro. Prime and paint with minimal prep work. Made in the U.S.A.. , , Must be pre-fitted before painting.. 8657
1 on hand
More Info/Options for Sumax LoBoy FatBob 8 1/4 in. Rear Fender 8657
Rear 1
|
|
|
|
$182.99
Sumax LoBoy 7 1/4 in. Rear Fender 8603
Manufacturer: Sumax
Dennis Kirk Part #: 392521
Sumax LoBoy 7 1/4 in. Rear Fender: Manufacturer part # 8603 - Made from space-age materials that are lighter and stronger than any fiberglass. Not predrilled, so you can put them in any stance you want. Glassed-in convoluted tubing makes it simple and easy to wire the taillight like a pro. Prime and paint with minimal prep work. Made in the U.S.A.. , , Must be pre-fitted before painting.. 8603
1 on hand
More Info/Options for Sumax LoBoy 7 1/4 in. Rear Fender 8603
Rear 1
|
|