$42.99Chase Harper Number Plate Trail Pack 9400BLK
Manufacturer: Chase Harper
Dennis Kirk Part #: 505771
Chase Harper Number Plate Trail Pack: Manufacturer part # 9400BLK - Designed for trail and enduro riders. Mounts over headlight number plate. Convenient way to add extra carrying capacity. Constructed of tough 1,000-denier Cordura . Measures approximately 12" L x 7" W x 3" D. Will fit perfectly on most KDX, IT, XR, XL, DR and KLR bikes. Available in black.. 9400BLK 1 on hand
$162.99MC Enterprises 200 Series Training Wheel Sets 200
Manufacturer: MC Enterprises
Dennis Kirk Part #: 271310
MC Enterprises 200 Series Training Wheel Sets: Manufacturer part # 200 - All-new design. Footpegs are retained in the stock position. Swept-back design puts the wheels more in line with the rider for improved handling and appearance. Narrowed wheel stance is stable, yet makes it easier to avoid obstacles and obstructions. Kits include all necessary hardware for installation.. 200 1 on hand
$62.99MC Enterprises Training Wheel Sets 101
Manufacturer: MC Enterprises
Dennis Kirk Part #: 27809
MC Enterprises Training Wheel Sets: Manufacturer part # 101 - Help build confidence in young riders. Sturdy training wheels fit many popular models. Come with all necessary brackets, wheels and mounting hardware.. 101 2 on hand
$62.99MC Enterprises Training Wheel Sets 100
Manufacturer: MC Enterprises
Dennis Kirk Part #: 49344
MC Enterprises Training Wheel Sets: Manufacturer part # 100 - Help build confidence in young riders. Sturdy training wheels fit many popular models. Come with all necessary brackets, wheels and mounting hardware.. 100 2 on hand
$22.95Moose Trophy Roll Chart Holder 14052
Manufacturer: Moose
Dennis Kirk Part #: 594280
Moose Trophy Roll Chart Holder: Manufacturer part # 14052 - Watertight, impact-resistant case is the perfect size for larger dual-sport route charts. Works with charts up to 2 3/8 in. wide. Includes all mounting hardware.. 14052 More than 10 on hand
$129.95Moose Training Wheels 2200
Manufacturer: Moose
Dennis Kirk Part #: 271263
Moose Training Wheels: Manufacturer part # 2200 - Provide more stable ride until the basics of braking, throttle control and steering are mastered. Simple mounting system keeps footpegs in the stock location; strong platform provided by the mid-mounted solid axle. Pnuematic, rubber wheels with ball bearing hubs stand up to generations of use. No clamping to the frame. Built to last in the USA. Replacement wheel available, part number 27-1547 , , Failure to use this apparatus correctly can result in serious injury or death. Only use Moose training wheels for their intended purpose. This is only a training aid!. , , Mounts to engine case, not footpeg brackets.. 2200 7 on hand
$28.95Moose Replacement Wheel For Training Wheels 2210
Manufacturer: Moose
Dennis Kirk Part #: 271547
Moose Replacement Wheel For Training Wheels: Manufacturer part # 2210 - One wheel with tube and bearing for Moose training wheels.. 2210 1 on hand
$34.95Moose Trail Pack Number Plate Bag ALE4642
Manufacturer: Moose
Dennis Kirk Part #: 505519
Moose Trail Pack Number Plate Bag: Manufacturer part # ALE4642 - Mounts above headlight or on front of number plate without headlight. Perfect size for Moose Racing rain gear or food. Used by course workers for carrying arrows and staplers. Convenient way to add extra carrying capacity. Measures approximately: 12 in. L x 7 in. W x 3 in. D.. ALE4642 8 on hand
$19.95Moose Spare Tube Fender Pack ALE5105
Manufacturer: Moose
Dennis Kirk Part #: 505520
Moose Spare Tube Fender Pack: Manufacturer part # ALE5105 - The easiest, no-hassle way to carry a spare tube. Made from durable 600-denier ripstop polyester with PVC backing; attaches easily to any fender, front or rear. Great for carrying a front 21" tube, tire spoons and tire inflator kit. Measures approximately 11.5 in. L x 6.5 in. W x 5 in. H when filled. Made in the U.S.A... ALE5105 More than 10 on hand
$566.99Bostrom Racing Gild Series High Mount Race Core Slip-On Stainless Steel Muffler p4400814
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400814
Bostrom Racing Gild Series High Mount Race Core Slip-On Stainless Steel Muffler: Manufacturer part # p4400814 - Endorsed by two top street-racing brothers, Bostrom Racings Gild series slip-ons are the result of extensive track and R&D testing and are tuned to work perfectly with your bikes stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5" diameter outlet tips have an aggressive 55 deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Slip-ons has a racing core and is packed exclusively with long-lasting Silent Sport Premium from Germany. Racing cores feature 15" L muffler shells and 2.5" low-percentage perforated cores for maximum flow and aggressive exhaust tone; most average 85-88 dB at idle; 97-100 dB at 5000 rpm (tested statically at 20", 45 deg.). NOTE: This is a general picture, the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. NOTE: This item ships in 3-4 days after the order is placed.. p4400814 1 on hand
$539.99Bostrom Racing Gild Series Race Core Flanged Bolt-On Stainless Steel Muffler p4400806
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400806
Bostrom Racing Gild Series Race Core Flanged Bolt-On Stainless Steel Muffler: Manufacturer part # p4400806 - Endorsed by two top street-racing brothers, Bostrom Racings Gild series bolt-ons are the result of extensive track and R&D testing and are tuned to work perfectly with your bikes stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5" diameter outlet tips have an aggressive 55 deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Bolt-on has a racing core and is packed exclusively with long-lasting Silent Sport Premium from Germany. Racing cores feature 15" L muffler shells and 2.5" low-percentage perforated cores for maximum flow and aggressive exhaust tone; most average 85-88 dB at idle; 97-100 dB at 5000 rpm (tested statically at 20", 45 deg.). NOTE: This is a general picture the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , This item ships in 3-4 days after the order is placed.. p4400806 1 on hand
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
