Race Tool

$177.99 JIMS Mainshaft Bearing Race Tool 34902-84
Manufacturer: JIMS
Dennis Kirk Part #: H28200
JIMS Mainshaft Bearing Race Tool: Manufacturer part # 34902-84 - Removes and installs the transmission main shaft inner bearing race on late 84-06 (except 06 Dyna models) Big Twin. Made in the U.S.A... 34902-84
3 on hand

More Info/Options for JIMS Mainshaft Bearing Race Tool 34902-84

Race Tool

$77.99 JIMS Wheel Bearing Race Tool 33071-73
Manufacturer: JIMS
Dennis Kirk Part #: H28202
JIMS Wheel Bearing Race Tool: Manufacturer part # 33071-73 - Remove and install bearing races yourself with this tool from JIMS. Fits all Big Twin and Sportster wheels from 73-99. Facilitates removal or installation of bearing cups. Use with handle/driver Part No. H28-702; sold separately. Made in the U.S.A... 33071-73
4 on hand

More Info/Options for JIMS Wheel Bearing Race Tool 33071-73

Race Tool

$63.99 JIMS Steering Head Bearing Race Tool 2232
Manufacturer: JIMS
Dennis Kirk Part #: H28420
JIMS Steering Head Bearing Race Tool: Manufacturer part # 2232 - Use to remove and install steering head bearing race. For use on Big Twin 49-07, Sportster 78-03 and Buell 87-02 OEM frames (will also work on most aftermarket frames). Must be used with tool driver spacer PART NO. H28-286 and a handle/driver PART NO. H28-702; sold separately. Made in the U.S.A... 2232
5 on hand

More Info/Options for JIMS Steering Head Bearing Race Tool 2232

Race Tool

$289.99 Baker Drivetrain Inner Primary Bearing Race Tool TOOLB56
Manufacturer: Baker Drivetrain
Dennis Kirk Part #: H28076
Baker Drivetrain Inner Primary Bearing Race Tool: Manufacturer part # TOOLB56 - Works on nearly every Big Twin transmission -- five- or six-speed, left- or right-side drive. Made in the U.S.A... TOOLB56
3 on hand

More Info/Options for Baker Drivetrain Inner Primary Bearing Race Tool TOOLB56

Race Tool

$7.99 Race Tools Small Muffler Plug RT-MPSM
Manufacturer: Race Tools
Dennis Kirk Part #: 28566
Race Tools Small Muffler Plug: Manufacturer part # RT-MPSM - Keep water and dirt out of your bikes muffler while bike is not in use. Insert plug into silencer opening and simply turn handle to expand plug. Fits 3/4 in.-1 1/4 in. outlet. RT-MPSM
More than 10 on hand

More Info/Options for Race Tools Small Muffler Plug RT-MPSM

Race Tool

$84.99 Cruz Tools DMX Fanny Pack Tool Kit DMX1
Manufacturer: Cruz Tools
Dennis Kirk Part #: 282229
Cruz Tools DMX Fanny Pack Tool Kit: Manufacturer part # DMX1 - Convenient, trail-ready tool kit. Contains:, 10mm and 12mm box end wrenches, 8mm, 10mm and 12mm 3-way T-handle wrenches, needle-nose-with-wire-cutter pliers, 3 hex keys, four-way screwdriver, three-way PackWrench™, Flashlight, 2 tire levers, and tire gauge. Also includes a roll of electric tape, WD-40®, 5/8 & 3/16 in. plug wrench and handle, plastic zip ties, wire, and a rag. Designed with heavy-duty hardware and mounting straps. Comes with a sturdy 5040-denier nylon carry pouch. Measures 7" x 10". DMX1
5 on hand

More Info/Options for Cruz Tools DMX Fanny Pack Tool Kit DMX1

Race Tool

$68.99 Woodys Steel Stud Sharpening Tool for 30 degree angle TOOL-SHARP-3
Manufacturer: Woodys
Dennis Kirk Part #: 080392
Woodys Steel Stud Sharpening Tool for 30 degree angle: Manufacturer part # TOOL-SHARP-3 - If your studs are sharp, your studs are safe. Fits into a 3/8 in. or larger drill chuck. Sharpens studs easily -even when they're still on your sled. Available for studs with 30º angles.. TOOL-SHARP-3
8 on hand

More Info/Options for Woodys Steel Stud Sharpening Tool for 30 degree angle TOOL-SHARP-3

Race Tool

$18.99 Woodys 5/16 Indexing Tool for Square Support Plates SPI-TOOL-5
Manufacturer: Woodys
Dennis Kirk Part #: 280001
Woodys 5/16 Indexing Tool for Square Support Plates: Manufacturer part # SPI-TOOL-5 - Fits on standard 3/8 in. drive ratchet handle and holds square support plate when nut is tightened to secure stud.. SPI-TOOL-5
7 on hand

More Info/Options for Woodys 5/16 Indexing Tool for Square Support Plates SPI-TOOL-5

Race Tool

$37.99 Woodys Track Tension Tool TRAK-TOOL
Manufacturer: Woodys
Dennis Kirk Part #: 282676
Woodys Track Tension Tool: Manufacturer part # TRAK-TOOL - Use to adjust the tracks tension according to the manufacturers guidelines.. TRAK-TOOL
More than 10 on hand

More Info/Options for Woodys Track Tension Tool TRAK-TOOL

Race Tool

$68.99 Woodys Steel Stud Sharpening Tool for 60 degree angle TOOL-SHARP-6
Manufacturer: Woodys
Dennis Kirk Part #: 080394
Woodys Steel Stud Sharpening Tool for 60 degree angle: Manufacturer part # TOOL-SHARP-6 - If your studs are sharp, your studs are safe. Fits into a 3/8 in. or larger drill chuck. Available for studs with 30°, 45° or 60° angles.. TOOL-SHARP-6
1 on hand

More Info/Options for Woodys Steel Stud Sharpening Tool for 60 degree angle TOOL-SHARP-6

Race Tool

$24.99 Woodys Indexing Tool for Triangle Support Plates SPI-TOOL-T
Manufacturer: Woodys
Dennis Kirk Part #: 282675
Woodys Indexing Tool for Triangle Support Plates: Manufacturer part # SPI-TOOL-T - Save time and knuckles. Stud size, 5/16in. and 7mm. Fit on standard 3/8 in. drive ratchet handle and index support plates.. SPI-TOOL-T
2 on hand

More Info/Options for Woodys Indexing Tool for Triangle Support Plates SPI-TOOL-T

Race Tool

$68.99 Woodys Steel Stud Sharpening Tool for 45 degree angle TOOL-SHARP-4
Manufacturer: Woodys
Dennis Kirk Part #: 080393
Woodys Steel Stud Sharpening Tool for 45 degree angle : Manufacturer part # TOOL-SHARP-4 - If your studs are sharp, your studs are safe. Fits into a 3/8 in. or larger drill chuck. Sharpens studs easily - even when they're still on your sled. Available for studs 45° angles.. TOOL-SHARP-4
2 on hand

More Info/Options for Woodys Steel Stud Sharpening Tool for 45 degree angle TOOL-SHARP-4

Race Tool

Race Tool