Pump Engine

$288.99 TP Engineering Oil Pump Assembly TP15010
Manufacturer: TP Engineering
Dennis Kirk Part #: H14319
TP Engineering Oil Pump Assembly: Manufacturer part # TP15010 - Constructed of high quality billet aluminum with a polished finish. The only oil pump that delivers oil to the crankshaft at idle (all other oil pumps have a pressure valve that closes at idle, denying the crankshaft oil flow at idle.). Unique three valve system provides 8-10 pounds of oil pressure at idle with a steady stream of oil to the crankshaft for a cooler running motor. Stainless steel check valve eliminates wet sumping upon start up and positively will not leak oil into the lower end during storage. No provisions for primary or rear chain oiling. Replacement gasket kit (H26-3026).. TP15010
1 on hand

More Info/Options for TP Engineering Oil Pump Assembly TP15010

Pump Engine

$288.99 TP Engineering Oil Pump Assembly TP15110
Manufacturer: TP Engineering
Dennis Kirk Part #: H14322
TP Engineering Oil Pump Assembly: Manufacturer part # TP15110 - Constructed of high quality billet aluminum with a polished finish. The only oil pump that delivers oil to the crankshaft at idle (all other oil pumps have a pressure valve that closes at idle, denying the crankshaft oil flow at idle.). Unique three valve system provides 8-10 pounds of oil pressure at idle with a steady stream of oil to the crankshaft for a cooler running motor. Stainless steel check valve eliminates wet sumping upon start up and positively will not leak oil into the lower end during storage. No provisions for primary or rear chain oiling. Replacement gasket kit (26-3027).. TP15110
1 on hand

More Info/Options for TP Engineering Oil Pump Assembly TP15110

Pump Engine

$332.99 TP Engineering Pro-Series Billet Oil Pump Assembly 45015412
Manufacturer: TP Engineering
Dennis Kirk Part #: 149082
TP Engineering Pro-Series Billet Oil Pump Assembly: Manufacturer part # 45015412 - Filter your oil before it enters your motor. Complete with fittings that send oil to the filter before pumping it through your engine. Allows the use of 10-micron oil filters for additional protection. Machined from 6061 T-6 aluminum billet and polished to a mirror finish. Patented three-valve system delivers oil to the crankshaft at idle. Stainless steel check-valve eliminates wet-sumping upon startup; positively will not leak oil into lower end during storage. Oil-pump assembly. No provisions for primary or rear-chain oiling. U.S. Patent #6,230,680. 45015412
1 on hand

More Info/Options for TP Engineering Pro-Series Billet Oil Pump Assembly 45015412

Pump Engine

$502.99 Feuling Motor Oil Pump Corporation Race Oil Pump 7062
Manufacturer: Feuling Motor Oil Pump Corporation
Dennis Kirk Part #: 140216
Feuling Motor Oil Pump Corporation Race Oil Pump: Manufacturer part # 7062 - A true precision part with tighter tolerances and harder billet aluminum alloy. Made of 7075 billet aluminum hard anodized. Creates a gain of 40% pressure volume and 60% scavenge volume over stock oil pumps. Eliminates wet sumping and oily air cleaners; provides cooler oil temperatures, resulting in more horsepower and more torque. Recommended for racing applications only. Made in the U.S.A.. , , NOTE: For Cam Support Plate to use with this oil pump order PART NO. 14-9845.. 7062
1 on hand

More Info/Options for Feuling Motor Oil Pump Corporation Race Oil Pump 7062

Pump Engine

$407.99 Feuling Motor Oil Pump Corporation Hi Volume Oil Pump 7060
Manufacturer: Feuling Motor Oil Pump Corporation
Dennis Kirk Part #: 149858
Feuling Motor Oil Pump Corporation Hi Volume Oil Pump: Manufacturer part # 7060 - Stock replacement oil pump made of 6061 billet aluminum with high-flow 2 in. gerotor gears increases oil pressure. Gain 20 percent pressure volume and 30 percent scavenge volume over stock oil pump. Eliminates blow-by, wet sumping and oily air cleaners. Provides cooler oil temperatures resulting in more horsepower and more torque. Can be used with fueling cam support plate 14-9845. INCLUDED ITEMS: , (1) Pressure Pump Housing, (1) Scavenge Pump Housing, (1) Separator Plate, (1) Sub Seal, (4) O-Ring, (3) O-Ring, (2) Dowel Pin 1/8 in. x 3/4 in., (1) Pressure Inner Rotor, (1) Scavenge Inner Rotor, (1) Pressure Outer Rotor, (1) Scavenger Outer Rotor, (4) Bolts 1/4 in. x 1-1/4 in., (1) O-Ring. 7060
1 on hand

More Info/Options for Feuling Motor Oil Pump Corporation Hi Volume Oil Pump 7060

Pump Engine

$332.99 TP Engineering Pro-Series Billet Oil Pump Assembly 45015512
Manufacturer: TP Engineering
Dennis Kirk Part #: 149083
TP Engineering Pro-Series Billet Oil Pump Assembly: Manufacturer part # 45015512 - Filter your oil before it enters your motor. Complete with fittings that send oil to the filter before pumping it through your engine. Allows the use of 10-micron oil filters for additional protection. Machined from 6061 T-6 aluminum billet and polished to a mirror finish. Patented three-valve system delivers oil to the crankshaft at idle. Stainless steel check-valve eliminates wet-sumping upon startup; positively will not leak oil into lower end during storage. Oil-pump assembly. No provisions for primary or rear-chain oiling. U.S. Patent #6,230,680. NOTE: 73-80 cases will require a simple drilling for oil drain hole by using drilling jig PART NO. H14-252 .. 45015512
1 on hand

More Info/Options for TP Engineering Pro-Series Billet Oil Pump Assembly 45015512

Pump Engine

$502.99 Feuling Motor Oil Pump Corporation Race Oil Pump 7050
Manufacturer: Feuling Motor Oil Pump Corporation
Dennis Kirk Part #: 149380
Feuling Motor Oil Pump Corporation Race Oil Pump: Manufacturer part # 7050 - A true precision part with tighter tolerances and harder billet aluminum alloy. Creates a gain of 40% pressure volume and 60% scavenge volume over stock oil pumps. Eliminates wet sumping and oily air cleaners; provides cooler oil temperatures, more horsepower and more torque. Recommended for racing applications only. Made in the U.S.A.. , , NOTE: Can be used with Feuling cam support plate PART NO. 14-9381.. 7050
1 on hand

More Info/Options for Feuling Motor Oil Pump Corporation Race Oil Pump 7050

Pump Engine

$183.99 TP Engineering Billet Oil Filter Mount 15410
Manufacturer: TP Engineering
Dennis Kirk Part #: 304470
TP Engineering Billet Oil Filter Mount: Manufacturer part # 15410 - Designed to mount directly to the engine case. Conceals oil lines, clamps and fittings for a super clean look. Machined from a block of billet aluminum and chromed to a mirror finish. Fits 92-99 80 inch Evolution engines with mounting bosses in the engine case. Comes complete with mounting bolts and fittings to accept 3/8 inch oil hoses.. 15410
1 on hand

More Info/Options for TP Engineering Billet Oil Filter Mount 15410

Pump Engine

$171.99 K & P Engineering Chrome Plated Oil Filter/Cooler Kit 89069
Manufacturer: K & P Engineering
Dennis Kirk Part #: 305377
K & P Engineering Chrome Plated Oil Filter/Cooler Kit: Manufacturer part # 89069 - With it's cleanable stainless steel mesh element this may be the last oil filter you will ever buy. The 3 1/8 in. long finned housing acts as an oil cooler and is CNC machined from 6061 T6 aluminum. The high-flow element is made from a medical grade type 304 stainless steel micronic filter cloth that will trap contaminates that far exceed the OEM requirements. Not only does it allow you to make a visual inspection of debris it is easily cleaned with any type of degreaser or soap and water. To further improve efficiency a super strength nickel plated neodymium rare earth magnet is installed in the element for pre-filtering the oil. Features a quad type filter housing to engine case seal, bypass valve and meets or exceeds the manufacturers specifications (will not void new bike warranty). Includes cup wrench and instructions. 3/4-16 thread size. Note: For replacement Quad Type O-Ring Seal, order DK part no. 140134. 89069
1 on hand

More Info/Options for K & P Engineering Chrome Plated Oil Filter/Cooler Kit 89069

Pump Engine

$8.95 Eastern Motorcycle Parts Oil Pump Gasket/Seal Kit JGI68FLR
Manufacturer: Eastern Motorcycle Parts
Dennis Kirk Part #: 263725
Eastern Motorcycle Parts Oil Pump Gasket/Seal Kit: Manufacturer part # JGI68FLR - Gasket/seal kit is available to complete the job. Made in the U.S.A.. , NOTE: Metal with beading. JGI68FLR
1 on hand

More Info/Options for Eastern Motorcycle Parts Oil Pump Gasket/Seal Kit JGI68FLR

Pump Engine

$207.99 SunMyth OEM Style Oil Pump Replaces OEM #26053-92 67088
Manufacturer: SunMyth
Dennis Kirk Part #: 148821
SunMyth OEM Style Oil Pump Replaces OEM #26053-92: Manufacturer part # 67088 - Whether you're building from the bottom up or simply adding more chrome to your scooter, these chrome-plated oil pumps are just what the doctor ordered. Oil pumps are complete with check ball and relief springs, drive gears, gaskets, keys and all necessary fittings. Chrome-plated mounting hardware included. Ready to prime and pump.. 67088
2 on hand

More Info/Options for SunMyth OEM Style Oil Pump Replaces OEM #26053-92 67088

Pump Engine

$207.99 SunMyth OEM Style Oil Pump Replaces OEM #26190-73 67083
Manufacturer: SunMyth
Dennis Kirk Part #: 148820
SunMyth OEM Style Oil Pump Replaces OEM #26190-73: Manufacturer part # 67083 - Whether you're building from the bottom up or simply adding more chrome to your scooter, these chrome-plated oil pumps are just what the doctor ordered. Oil pumps are complete with check ball and relief springs, drive gears, gaskets, keys and all necessary fittings. Chrome-plated mounting hardware included. When installing these pumps on pre-81 models, crankcase oil passage drilling jig PART NO. H14-252 must be used. Ready to prime and pump.. 67083
5 on hand

More Info/Options for SunMyth OEM Style Oil Pump Replaces OEM #26190-73 67083

Pump Engine

Pump Engine