|
|
$230.99
R&D High Performance Racing Cylinder Head - 35cc (rec) 41270035
Manufacturer: R&D
Dennis Kirk Part #: 147903
R&D High Performance Racing Cylinder Head - 35cc (rec): Manufacturer part # 41270035 - Stay ahead of the pack without running down your wallet with an R&D Racing head. These precision-cast heads provide superior design and function, raising your baseline compression ratio for greater overall power. Exact chamber volume match-up with CNC-machined combustion chambers. Increased top-end cooling and high-temp O-rings for sealing due to improved waterjacket areas. No more worrying about the failure of thin gaskets with these direct bolt-on heads. Choose your performance level; "Rec" heads raise the compression value to the optimum level for recreational applications, allowing you to use standard 92-octane pump gas while increasing throttle response and reliability. Higher-compression "Mod" heads are for highly modified engines using high-octane race fuel.. 41270035
1 on hand
More Info/Options for R&D High Performance Racing Cylinder Head - 35cc (rec) 41270035
Performance Racing
|
|
|
|
$34.99
Maxxis M6114 Scooter Performance Racing Front or Rear Tire M6114
Manufacturer: Maxxis
Dennis Kirk Part #: 542950
Maxxis M6114 Scooter Performance Racing Front or Rear Tire: Manufacturer part # M6114 - Specially-designed tread gives the maximum amount of contact and excellent rider feedback. Soft rubber compound produces unbelievable handling and more grip. Stable nylon-ply construction. SIDEWALL ID Information. , Dimensions: , Inflated Width/Measuring Rim Width: 2.60 in./2.50 in., Inflated Diameter: 17.28 in., Acceptable Rim Width: 2.50 in., Deepest Tread Depth: 7/32 in., Balance dot: Yes-Yellow, Directional Arrow: Yes, Speed Rating: J-Rated up to 62 MPH, , Capacities and Construction: , Load Capacity/Inflation Pressure: 430 lbs./36 PSI, Load Range: B, Bias or Radial Ply: Bias, Tread Plies/Material: Nylon, Sidewall Plies/Material: Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tubeless. M6114
2 on hand
More Info/Options for Maxxis M6114 Scooter Performance Racing Front or Rear Tire M6114
Performance Racing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$959.99
Lonestar Racing Race 2 in. Extension Front A-Arms p552689
Manufacturer: Lonestar Racing
Dennis Kirk Part #: 552690
Lonestar Racing Race 2 in. Extension Front A-Arms: Manufacturer part # p552689 - Race type incluydes intergrated skid plates and stainless steel tie-rods. 2 inch extension, 1 inch forward. Constructed of 4130 Chromoly and TIG welded, these strong, lightweight A-arms dramatically improve the handling and stability of your quad. Available from stock width to three inches longer than stock. Allows you to adjust camber and caster. A-arms perform best with a shock and axle upgrade. Longer brake lines and tie rods are required on wider than stock arms.. p552689
1 on hand
More Info/Options for Lonestar Racing Race 2 in. Extension Front A-Arms p552689
Performance Racing
|
|
|
|
Moose Extended Lift Push Tube
Vance & Hines Dresser Dual Header Pipes 16729
Motion Pro SyncPro Carburetor Tuner
Kuryakyn Wheel Chock 922
Vance & Hines Big Radius Exhaust 26029
Caliber Poly-Shield III Salt Shield 13401
Parts Unlimited Large Universal Cover CS-1002
Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920
Parts Unlimited Total Cover TC-1005
Vance & Hines Straight Shot HS Slip-Ons 16819
Vance & Hines Big Shot Duals 17925
Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322
HJC Electric Shield
Battery Tender Battery Tender Jr. 12-Volt Model
BUB Rinehart 3 1/2 in. Slip-On Mufflers
Kuryakyn GranTour Bag 4141
Vance & Hines Big Radius Exhaust 26003
NGK Resistor Spark Plug BR9ES
JPS Blue Polyurethane Fuel Line
HJC Universal Quick Release Buckle
RBI Inc Bearing OEM Standard No 62052RS
