$33.99Cobra Replacement O2 Sensor Eliminator Kit for FI2000R Plug-In Fuel Processor Module 6921100
Manufacturer: Cobra
Dennis Kirk Part #: 202072
Cobra Replacement O2 Sensor Eliminator Kit for FI2000R Plug-In Fuel Processor Module: Manufacturer part # 6921100 - Replacement O2 Sensor Eliminator Kit for FI2000R Plug-In Fuel Processor Modules for HD 2006-2008 This product is designed to eliminate the check engine ligt from coming on when the stock oxygen sensors are disconnected.. 6921100 1 on hand
$984.95Rinehart True Dual Exhaust With O2 Sensor R52220CG
Manufacturer: Rinehart
Dennis Kirk Part #: 4400318
Rinehart True Dual Exhaust With O2 Sensor : Manufacturer part # R52220CG - Same unique header design as the Softail and Dyna styles to provide the largest power increase of any exhaust system available. Includes one oxygen sensor port in the head pipes, which accept closed-loop aftermarket fuel management systems for better performance and reliability. Header features multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish.. The header pipes include 2 1/4 in. diameter full-length heat shields. New black mounting bracket kit holds the rear pipe in the center for more support and less stress. New design torque-chamber baffles a rich sound with minimal noise, (96 dB at 2500 rpm). Muffler bodies measure 3 1/2 in.. This chromed system is highlighted by polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Optional Quiet Baffles reduce exhaust sound and increase engine torque with only a slight loss of horsepower; optional performance baffles open up the exhaust for even greater power and torque gains; sold in pairs. Optional Quiet Baffles - 4401995, optional end cap (chrome) - 4401266, replacement black end cap - 4402636. 2 1/4 in. i.d. Hi-Flow Performance Baffles - 44-01265. Designed and built in the U.S.A.. , , NOTE: , FLHX/FLRS models may require adjustment of passenger pegs, , NOTE: , Only has one oxygen sensor port, this port is for models with a closed-loop aftermarket fuel management system and come with a plug for models without it, , INCLUDED ITEMS: , Three #28 hose clamps, Five #20 hose clamps, Two nut plates, One 6mm nylon lock, Two 10mm lock nuts, Two 1/2 in. washers, Two 10 x 30mm allen bolts, Four 5/16 in. x 5/8 in. flange head bolts, One 6 x 16mm flange bolt, Two 10 x 25mm button head allen bolt, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) FL Rinehart rear pipe. , 2. (1) FL Rinehard front pipe. , 3. (1) FL Rinehart Rear head shield. , 4. (1) FL Rinehart front head shield. , 5. (1) FL Rinehart R.T. muffler. , 6. (1) FL Rinehart L.F muffler. , 7. (7) 2 1/4" stainless clamp. , 8. (2) 2 1/8" barrek clamp. , 9. (1) 1 13/16 barrel clamp. , 10. (1) 2" P clamp 612-2000. , 11. (1 pr) James exhaust gaskets. , 12. (1) Header support bkt.. , 13. (1) Header support tab. , 14. (4) 5/16-18 x 5/8" hex bolts. , 15. (1) 5/16-18 x 1 1/4" hex bolts. , 16. (7) 5/16 flat washers. , 17. (6) 5/16-18 LOCKING NUT. , 18. (2) 1/2"-13x1/2 allen bolts. , 19. (2) .500 aluminum spacers. , 20. (1) 5/16-18 x 3/4 button hd.. , 21. (1) 5/16 distorted locking nut. , 22. (1) 02 bung plug. , 23. (1) Instruction sheet. R52220CG 2 on hand
$16.99Supertrapp O2 Sensor Port Plug Kit 100-7175
Manufacturer: Supertrapp
Dennis Kirk Part #: 4402703
Supertrapp O2 Sensor Port Plug Kit: Manufacturer part # 100-7175 - Plugs sensor ports on SuperTrapp exhaust when installing on H-D models that don't have an O2 sensor. Sold in pairs.. 100-7175 Expected Soon
$16.99Vance & Hines O2 Sensor Port Plug Kit p4403276
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4403276
Vance & Hines O2 Sensor Port Plug Kit: Manufacturer part # p4403276 - Kit allows select pre-closed-loop H-D models to run newer style exhaust systems equipped with O degree sensor ports. Includes two zinc-plated, hex-head, 18mm x 1.5 threaded plugs with sealing washers. Simply screw into non-essential sensor ports.. p4403276 2 on hand
$595.99BUB Jug Hugger with Dual O2 Sensor Ports p4403455
Manufacturer: BUB
Dennis Kirk Part #: 4403455
BUB Jug Hugger with Dual O2 Sensor Ports: Manufacturer part # p4403455 - Performance pipes with a twist. Jug Huggers for the V Rod have the right mix of air flow and back pressure to make for increased performance and incredible sound. The oversized removable heat shield gives the Jug Huggers a 2 1/2 in. fat look. Max-Flow performance baffles and chrome billet aluminum end caps are standard. Optional stealth baffles, or torque chambers give you the option of getting the right performance from your motorcycle. The R, D and DX models require the Harley Davidson bracket 65113-07 for proper fitment. p4403455 1 on hand
$34.99Westach Coolant Sensor Lead 1/8 in. pipe x 1in. Long LM399S7
Manufacturer: Westach
Dennis Kirk Part #: 170713
Westach Coolant Sensor Lead 1/8 in. pipe x 1in. Long: Manufacturer part # LM399S7 - Use voltage rectifier PART NO. 21-851 for vehicles without battery when installing Westach Exhaust Gas, Cylinder Head and Coolant Temperature Gauges; converts 15-100 volt AC to 13 volt DC. Heavy-duty leads designed for durability. LM399S7 1 on hand
$72.99Westach Exhaust Temp Sensor Lead LM7122DWKE
Manufacturer: Westach
Dennis Kirk Part #: 170710
Westach Exhaust Temp Sensor Lead: Manufacturer part # LM7122DWKE - Use voltage rectifier PART NO. 21-851 for vehicles without battery when installing Westach Exhaust Gas, Cylinder Head and Coolant Temperature Gauges; converts 15-100 volt AC to 13 volt DC. High-performance exhaust leads designed for quick reaction. Heavy-duty leads designed for durability.. LM7122DWKE 5 on hand
$34.99Westach Coolant Sensor Lead 1/8 in. pipe x 5/16 in. long LM399S1
Manufacturer: Westach
Dennis Kirk Part #: 170712
Westach Coolant Sensor Lead 1/8 in. pipe x 5/16 in. long: Manufacturer part # LM399S1 - Use voltage rectifier PART NO. 21-851 for vehicles without battery when installing Westach Exhaust Gas, Cylinder Head and Coolant Temperature Gauges; converts 15-100 volt AC to 13 volt DC. Heavy-duty leads designed for durability. LM399S1 3 on hand
$26.99Westach Cylinder Head Sensor Lead 14 mm LM7124WK
Manufacturer: Westach
Dennis Kirk Part #: 170711
Westach Cylinder Head Sensor Lead 14 mm: Manufacturer part # LM7124WK - Use voltage rectifier PART NO. 21-851 for vehicles without battery when installing Westach Exhaust Gas, Cylinder Head and Coolant Temperature Gauges; converts 15-100 volt AC to 13 volt DC. High-performance exhaust leads designed for quick reaction. Heavy-duty leads designed for durability. LM7124WK More than 10 on hand
$59.99Westach Exhaust Temp Sensor Lead LM7122DWK
Manufacturer: Westach
Dennis Kirk Part #: 170709
Westach Exhaust Temp Sensor Lead: Manufacturer part # LM7122DWK - Use voltage rectifier PART NO. 21-851 for vehicles without battery when installing Westach Exhaust Gas, Cylinder Head and Coolant Temperature Gauges; converts 15-100 volt AC to 13 volt DC. High-performance exhaust leads designed for quick reaction. Heavy-duty leads designed for durability.. LM7122DWK More than 10 on hand
$267.99Delkron FXR-Style Bare Transmission Case with Speedo Sensor Hole D4024
Manufacturer: Delkron
Dennis Kirk Part #: H14620
Delkron FXR-Style Bare Transmission Case with Speedo Sensor Hole: Manufacturer part # D4024 - 356T-6 aluminum used to cast in a permanent mold for superior strength. Finished on a CNC vertical mill for precision locating and tolerances. All OEM FXR 1990-1994 transmission parts fit this case. Made in the U.S.A.. Includes an MSO (Manufacturers Statement of Origin).. D4024 1 on hand
$654.99Delkron Complete Transmission Case Assembly w/Trap Door & Speedo Sensor Hole D4012
Manufacturer: Delkron
Dennis Kirk Part #: 148828
Delkron Complete Transmission Case Assembly w/Trap Door & Speedo Sensor Hole: Manufacturer part # D4012 - 356 T-6 aluminum used to cast in a permanent mold for superior strength. Finished on a CNC vertical mill for precision locating and tolerances. Replace OEM NOS. 34731-86A/34731-89. Include an MSO (Manufacturer's Statement of Origin). Made in the U.S.A.. NOTE: This item ships in 3-4 days after the order is placed.. D4012 1 on hand
